George Samuel Onep
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
George Samuel Onep has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Milon Selvam Dennison
Department of Mechanical Engineering, School of Engineering and Applied Sciences, Kampala International University, Ishaka-Bushenyi, Uganda
8 shared publications - Omer Eisa Babiker
Department of Mechanical Engineering, School of Engineering and Applied Sciences, Kampala International University, Ishaka-Bushenyi, Uganda
8 shared publications - Alphonse Candia
Agricultural Engineering and Appropriate Technology Research Center (AEATREC)-Namalere, National Agricultural Research Laboratories (NARL), National Agricultural Research Organization (NARO), Entebbe, Uganda
7 shared publications - Ronald Walozi
Department of Mechanical Engineering, School of Engineering and Applied Sciences, Kampala International University, Ishaka-Bushenyi, Uganda
7 shared publications - Samuel Okurut
Agricultural Engineering and Appropriate Technology Research Center (AEATREC)-Namalere, National Agricultural Research Laboratories (NARL), National Agricultural Research Organization (NARO), Entebbe, Uganda
7 shared publications - Yinka Sofihullahi Sanusi
Department of Mechanical Engineering, School of Engineering and Applied Sciences, Kampala International University, Ishaka-Bushenyi, Uganda
7 shared publications
Latest Publications
- Open Access
- 25 September 2026
- Published by Springer Nature in Discover Applied Sciences
Effect of rice husk content on thermal and chemical characteristics of rice husks and pine sawdust heterogeneous briquettes
- 25 September 2026
- Published by Springer Nature in Discover Applied Sciences
Open AccessEffect of rice husk content on thermal and chemical characteristics of rice husks and pine sawdust heterogeneous briquettes
- Open Access
- 15 September 2026
- Published by F1000 Research Ltd in F1000Research
- Vol. 15, 1541
As-built CAD and ANSYS structural–thermal validation of a locally fabricated anaerobic co-digester for institutional organic waste in Uganda
Background Locally fabricated anaerobic digesters are commonly sized from biochemical yield assumptions without checking fabricated geometry, pressure resistance, insulation performance, or commissioning evidence. This study integrated waste assessment, as-built computer-aided design (CAD), finite-element analysis, and start-up monitoring of a stainless-steel anaerobic co-digester at Uganda Technical College Bushenyi. Methods Available food, fecal, and green-yard wastes were constrained to a C/N ratio of 25–30. The fabricated geometry was reconstructed in CAD. ANSYS Mechanical APDL evaluated shell response at 0.200 and 1.318 MPa, while an axisymmetric thermal model evaluated lateral heat loss through the double wall. Digester temperature, ambient temperature, and pH were monitored for 29 days; gas was screened once. Results Of 506.00 kg d-1 available waste, 350.32 kg d-1 met the C/N constraint. The corrected theoretical biogas potential was 33.44 m3 d-1; this was not a measured production rate. The as-built inner shell was 346 mm x 692 mm x 3 mm. At 0.200 MPa, ANSYS predicted 10.03 MPa equivalent stress and 0.0199 mm displacement. The thermal model predicted 16.68 W lateral holding loss at a 35 degrees C inner-wall boundary. The unheated prototype remained near ambient temperature, acidified before wood-ash addition, and produced non-igniting, oxygen-containing gas. Conclusions The fabricated vessel has a traceable preliminary structural and thermal basis, but commissioning did not demonstrate methane production or readiness for kitchen use. Controlled biomethane-potential testing, calibrated gas-volume and composition measurements, process-stability monitoring, and detailed pressure-vessel assessment are required before deployment.
- 15 September 2026
- Published by F1000 Research Ltd in F1000Research
- Vol. 15, 1541
Open AccessAs-built CAD and ANSYS structural–thermal validation of a locally fabricated anaerobic co-digester for institutional organic waste in Uganda
Background Locally fabricated anaerobic digesters are commonly sized from biochemical yield assumptions without checking fabricated geometry, pressure resistance, insulation performance, or commissioning evidence. This study integrated waste assessment, as-built computer-aided design (CAD), finite-element analysis, and start-up monitoring of a stainless-steel anaerobic co-digester at Uganda Technical College Bushenyi. Methods Available food, fecal, and green-yard wastes were constrained to a C/N ratio of 25–30. The fabricated geometry was reconstructed in CAD. ANSYS Mechanical APDL evaluated shell response at 0.200 and 1.318 MPa, while an axisymmetric thermal model evaluated lateral heat loss through the double wall. Digester temperature, ambient temperature, and pH were monitored for 29 days; gas was screened once. Results Of 506.00 kg d-1 available waste, 350.32 kg d-1 met the C/N constraint. The corrected theoretical biogas potential was 33.44 m3 d-1; this was not a measured production rate. The as-built inner shell was 346 mm x 692 mm x 3 mm. At 0.200 MPa, ANSYS predicted 10.03 MPa equivalent stress and 0.0199 mm displacement. The thermal model predicted 16.68 W lateral holding loss at a 35 degrees C inner-wall boundary. The unheated prototype remained near ambient temperature, acidified before wood-ash addition, and produced non-igniting, oxygen-containing gas. Conclusions The fabricated vessel has a traceable preliminary structural and thermal basis, but commissioning did not demonstrate methane production or readiness for kitchen use. Controlled biomethane-potential testing, calibrated gas-volume and composition measurements, process-stability monitoring, and detailed pressure-vessel assessment are required before deployment.
- Open Access
- 25 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Thermal–chemical characterization of hydrochloric acid-treated rice husk–pine sawdust heterogeneous briquettes
Heterogeneous briquettes formulated from abundant rice husk and pine sawdust blended and treated with HCl can address limited access to clean energy. However, briquettes from untreated blends of rice husk and pine sawdust exhibit higher ash content, which reduces their thermochemical characteristics. The aim of the study was to determine the effect of HCl on the thermal-chemical properties of heterogeneous briquettes made from a blend of rice husk and pine sawdust, treated at varying concentrations. The study treated a blend of 10 wt% rice husk and 90 wt% pine sawdust with HCl concentrations of 1%, 2%, 3%, 4%, and 5% at ambient temperature for one hour. The briquettes were then fabricated and analyzed to identify optimal conditions that enhance calorific value and thermal efficiency while reducing emissions. The novelty lies in blending rice husk and pine sawdust biomasses, where pine sawdust provides better calorific value and lower ash content, while rice husks, in addition to ensuring sustainability due to being non-utilized yet readily available, provide thermal stability to the briquettes, given relatively higher silica content. The study's novelty extends beyond ash and higher heating value analyses to lignocellulose composition, thermal efficiency, and emissions analysis. Findings revealed that briquettes from treated blends exhibited reduced ash content (2.34 ± 0.05% vs. 10.84 ± 0.85%), higher HHV (18.99 ± 0.02 MJ/kg vs. 18.15 ± 0.09 MJ/kg), and thermal efficiency (73.49 ± 1.07% vs. 49.90 ± 1.08%) than untreated briquettes. These briquettes had reduced CO emissions (0.82 ± 0.01%), meeting the Tier 5 range (≤ 3 g/MJd) and PM2.5 emissions (80.22 ± 1.96 mg/MJd) meeting the Tier 3 range (> 6 2 mg/MJd to ≤ 218 mg/MJd). 5% HCl was the optimal treatment condition, in which briquettes exhibited the highest HHV and thermal efficiency while achieving the lowest PM2.5 and relatively low CO emissions. The study contributes to the literature by demonstrating that acid-treated biomass briquettes, optimally at 5% HCl, achieve significantly lower ash content, higher calorific value, and thermal efficiency, as well as reduced CO and PM2.5 emissions, meeting international clean cooking standards, thereby advancing sustainable fuel development and providing practical means for cleaner energy transitions.
- 25 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessThermal–chemical characterization of hydrochloric acid-treated rice husk–pine sawdust heterogeneous briquettes
Heterogeneous briquettes formulated from abundant rice husk and pine sawdust blended and treated with HCl can address limited access to clean energy. However, briquettes from untreated blends of rice husk and pine sawdust exhibit higher ash content, which reduces their thermochemical characteristics. The aim of the study was to determine the effect of HCl on the thermal-chemical properties of heterogeneous briquettes made from a blend of rice husk and pine sawdust, treated at varying concentrations. The study treated a blend of 10 wt% rice husk and 90 wt% pine sawdust with HCl concentrations of 1%, 2%, 3%, 4%, and 5% at ambient temperature for one hour. The briquettes were then fabricated and analyzed to identify optimal conditions that enhance calorific value and thermal efficiency while reducing emissions. The novelty lies in blending rice husk and pine sawdust biomasses, where pine sawdust provides better calorific value and lower ash content, while rice husks, in addition to ensuring sustainability due to being non-utilized yet readily available, provide thermal stability to the briquettes, given relatively higher silica content. The study's novelty extends beyond ash and higher heating value analyses to lignocellulose composition, thermal efficiency, and emissions analysis. Findings revealed that briquettes from treated blends exhibited reduced ash content (2.34 ± 0.05% vs. 10.84 ± 0.85%), higher HHV (18.99 ± 0.02 MJ/kg vs. 18.15 ± 0.09 MJ/kg), and thermal efficiency (73.49 ± 1.07% vs. 49.90 ± 1.08%) than untreated briquettes. These briquettes had reduced CO emissions (0.82 ± 0.01%), meeting the Tier 5 range (≤ 3 g/MJd) and PM2.5 emissions (80.22 ± 1.96 mg/MJd) meeting the Tier 3 range (> 6 2 mg/MJd to ≤ 218 mg/MJd). 5% HCl was the optimal treatment condition, in which briquettes exhibited the highest HHV and thermal efficiency while achieving the lowest PM2.5 and relatively low CO emissions. The study contributes to the literature by demonstrating that acid-treated biomass briquettes, optimally at 5% HCl, achieve significantly lower ash content, higher calorific value, and thermal efficiency, as well as reduced CO and PM2.5 emissions, meeting international clean cooking standards, thereby advancing sustainable fuel development and providing practical means for cleaner energy transitions.
- Open Access
- 28 May 2026
- Published by Springer Nature in Discover Mechanical Engineering
- Vol. 5 (1)
Comparative analysis of acid treatments on char production and energy productivity of rice husk and pine sawdust briquettes
- 28 May 2026
- Published by Springer Nature in Discover Mechanical Engineering
- Vol. 5 (1)
Open AccessComparative analysis of acid treatments on char production and energy productivity of rice husk and pine sawdust briquettes
- Open Access
- 14 May 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Transient thermal-hydraulic modelling of a solar thermal reactor for water disinfection
- 14 May 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Open AccessTransient thermal-hydraulic modelling of a solar thermal reactor for water disinfection
- Open Access
- 11 May 2026
- Published by F1000 Research Ltd in F1000Research
- Vol. 15, 697
Design and Modeling of a Solar-Powered Water System for Real-Time Microbial Detection and Treatment
Background Access to safe drinking water remains a persistent challenge in low-resource settings such as Ishaka Municipality, Uganda, where surface and groundwater sources are frequently contaminated and access to reliable electricity is limited. This study presents the design, modeling, and performance evaluation of a solar-powered hybrid water treatment system integrated with a biosensor-based microbial detection unit, enabling autonomous operation and real-time water quality monitoring for decentralized applications. Methods A total of 384 water samples were collected from springs, wetlands, wells, and tap sources and analyzed for key physicochemical and microbial parameters, including turbidity, pH, and indicator organisms. The proposed system integrates sedimentation, activated carbon filtration, reverse osmosis, and solar thermal disinfection to achieve multi-barrier treatment. Hydraulic and filtration performance were modeled using fluid flow and porous media principles, while microbial inactivation was described using first-order kinetic models. The photovoltaic subsystem was evaluated through detailed loss modeling, incorporating temperature effects, partial shading, and inverter inefficiencies to assess overall system reliability. Results Baseline results indicated significant contamination, with Escherichia coli concentrations reaching 210 CFU/100 mL and turbidity values up to 146 NTU. The hybrid system achieved over 95% removal of contaminants, complete elimination of E. coli , and compliance with World Health Organization drinking water standards. Solar thermal disinfection provided a 4–6 log reduction in microbial indicators. The integrated biosensor demonstrated rapid response times (45–90 seconds) and strong correlation with laboratory biochemical oxygen demand measurements (R 2 = 0.89–0.94). The photovoltaic subsystem maintained a performance ratio of 0.84–0.88, consistently meeting 100% of operational energy demand under varying environmental conditions. Conclusion These results demonstrate that the proposed system provides an effective, energy-autonomous solution for decentralized water purification with real-time monitoring capability, offering significant potential for improving access to safe drinking water in rural and resource-limited environments.
- 11 May 2026
- Published by F1000 Research Ltd in F1000Research
- Vol. 15, 697
Open AccessDesign and Modeling of a Solar-Powered Water System for Real-Time Microbial Detection and Treatment
Background Access to safe drinking water remains a persistent challenge in low-resource settings such as Ishaka Municipality, Uganda, where surface and groundwater sources are frequently contaminated and access to reliable electricity is limited. This study presents the design, modeling, and performance evaluation of a solar-powered hybrid water treatment system integrated with a biosensor-based microbial detection unit, enabling autonomous operation and real-time water quality monitoring for decentralized applications. Methods A total of 384 water samples were collected from springs, wetlands, wells, and tap sources and analyzed for key physicochemical and microbial parameters, including turbidity, pH, and indicator organisms. The proposed system integrates sedimentation, activated carbon filtration, reverse osmosis, and solar thermal disinfection to achieve multi-barrier treatment. Hydraulic and filtration performance were modeled using fluid flow and porous media principles, while microbial inactivation was described using first-order kinetic models. The photovoltaic subsystem was evaluated through detailed loss modeling, incorporating temperature effects, partial shading, and inverter inefficiencies to assess overall system reliability. Results Baseline results indicated significant contamination, with Escherichia coli concentrations reaching 210 CFU/100 mL and turbidity values up to 146 NTU. The hybrid system achieved over 95% removal of contaminants, complete elimination of E. coli , and compliance with World Health Organization drinking water standards. Solar thermal disinfection provided a 4–6 log reduction in microbial indicators. The integrated biosensor demonstrated rapid response times (45–90 seconds) and strong correlation with laboratory biochemical oxygen demand measurements (R 2 = 0.89–0.94). The photovoltaic subsystem maintained a performance ratio of 0.84–0.88, consistently meeting 100% of operational energy demand under varying environmental conditions. Conclusion These results demonstrate that the proposed system provides an effective, energy-autonomous solution for decentralized water purification with real-time monitoring capability, offering significant potential for improving access to safe drinking water in rural and resource-limited environments.
- Open Access
- 2 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16
Influences of sulfuric acid treatment on thermo-chemical properties of rice husk-pine sawdust heterogeneous briquettes
Heterogeneous briquettes made from rice husk-pine sawdust blend treated with sulfuric acid have the potential to satisfy the increasing global demand for sustainable energy. However, untreated blends are constrained by unfavorable thermochemical properties. In this study, a blend comprising 10 wt% rice husk and 90 wt% pine sawdust was subjected to H2SO4 treatment at 1%, 2%, 3%, 4%, and 5% (v/v) for 1-h at ambient temperature. Briquettes were subsequently formulated, and thermochemical properties were assessed to identify treatment conditions enhancing energy and combustion performance. The briquettes were analyzed for lignocellulose using acid detergent fiber and lignin, and neutral detergent fiber; higher heating value HHV using calorimetry; and thermal efficiency and emissions using a water boiling test (WBT) coupled with a portable emission monitoring system (PEMS) 4000-series sensor. The results demonstrated that sulfuric acid treatment increased briquettes’ HHV from 18.21 ± 0.09 MJ/kg (untreated) up to 18.82 ± 0.03 MJ/kg. The 1% concentration yielded the highest thermal efficiency (71.49 ± 2.05%), accompanied by the lowest CO emissions (0.88 ± 0.03 g/MJd), meeting the ISO 19,867–1:2018 Tier 5 limits, and the lowest PM2.5 emissions (100.67 ± 1.53 mg/MJd), within the Tier 3 limit. Overall, the optimal sulfuric acid treatment condition for effective combustion performance and energy delivery was 1%. However, cost–benefit analysis should be incorporated into future studies for practical real-world application.
- 2 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16
Open AccessInfluences of sulfuric acid treatment on thermo-chemical properties of rice husk-pine sawdust heterogeneous briquettes
Heterogeneous briquettes made from rice husk-pine sawdust blend treated with sulfuric acid have the potential to satisfy the increasing global demand for sustainable energy. However, untreated blends are constrained by unfavorable thermochemical properties. In this study, a blend comprising 10 wt% rice husk and 90 wt% pine sawdust was subjected to H2SO4 treatment at 1%, 2%, 3%, 4%, and 5% (v/v) for 1-h at ambient temperature. Briquettes were subsequently formulated, and thermochemical properties were assessed to identify treatment conditions enhancing energy and combustion performance. The briquettes were analyzed for lignocellulose using acid detergent fiber and lignin, and neutral detergent fiber; higher heating value HHV using calorimetry; and thermal efficiency and emissions using a water boiling test (WBT) coupled with a portable emission monitoring system (PEMS) 4000-series sensor. The results demonstrated that sulfuric acid treatment increased briquettes’ HHV from 18.21 ± 0.09 MJ/kg (untreated) up to 18.82 ± 0.03 MJ/kg. The 1% concentration yielded the highest thermal efficiency (71.49 ± 2.05%), accompanied by the lowest CO emissions (0.88 ± 0.03 g/MJd), meeting the ISO 19,867–1:2018 Tier 5 limits, and the lowest PM2.5 emissions (100.67 ± 1.53 mg/MJd), within the Tier 3 limit. Overall, the optimal sulfuric acid treatment condition for effective combustion performance and energy delivery was 1%. However, cost–benefit analysis should be incorporated into future studies for practical real-world application.
- Top Cited PapersOpen Access
- 31 March 2026
- Published by Springer Nature in Discover Sustainability
- Vol. 7 (1)
A comprehensive review of chemical treatments for biomass feedstock to enhance briquette characteristics
Converting biomass into briquettes offers a promising way to meet increasing global energy needs while reducing environmental issues. However, briquette performance is limited by low calorific value, high ash, and moisture contents. Materials such as corn cobs, groundnut shells, banana leaves, sugarcane bagasse, and rice husks contain ash levels exceeding the recommended 4%, resulting in slagging and reduced thermal performance. Chemical treatment with alkali, acid, and hydrothermal methods has become a practical approach to enhancing briquette quality. This review evaluates the effectiveness of these treatments by examining their influence on biomass characteristics. A structured narrative review methodology was applied, involving a comprehensive literature search of Google Scholar, Scopus, and other sources, covering peer-reviewed journals, grey literature, and case studies published in English between 2005 and 2025. Findings revealed sodium hydroxide as the most widely applied alkali, increasing calorific value by up to 16.2% in celosia argentea , cabbage, and banana leaf biomass. Among acids, sulphuric is the most effective, enhancing calorific value by up to 31.83% in rice stalks and watermelon biomasses, while hydrochloric achieves ash reduction of up to 96.26% in corn and soybean stalks. Briquettes for industrial application are classified according to DIN 51731 and ISO 17225 (class I1-I3 for industrial and B for standardized domestic heating) by ash content < 4%, moisture < 13%, volatile matter < 40%, net calorific value ≥ 14.5 MJ/kg, nitrogen < 0.6%, and sulphur < 0.8%. Despite demonstrated improvements, inhibitor formation, effluent disposal, and equipment corrosion hinder real-world application. Future research should optimize chemical treatment concentrations for heterogeneous biomasses and conduct post-treatment briquette analysis, including environmental and techno-economic implications.
- 31 March 2026
- Published by Springer Nature in Discover Sustainability
- Vol. 7 (1)
Top Cited PapersOpen AccessA comprehensive review of chemical treatments for biomass feedstock to enhance briquette characteristics
Converting biomass into briquettes offers a promising way to meet increasing global energy needs while reducing environmental issues. However, briquette performance is limited by low calorific value, high ash, and moisture contents. Materials such as corn cobs, groundnut shells, banana leaves, sugarcane bagasse, and rice husks contain ash levels exceeding the recommended 4%, resulting in slagging and reduced thermal performance. Chemical treatment with alkali, acid, and hydrothermal methods has become a practical approach to enhancing briquette quality. This review evaluates the effectiveness of these treatments by examining their influence on biomass characteristics. A structured narrative review methodology was applied, involving a comprehensive literature search of Google Scholar, Scopus, and other sources, covering peer-reviewed journals, grey literature, and case studies published in English between 2005 and 2025. Findings revealed sodium hydroxide as the most widely applied alkali, increasing calorific value by up to 16.2% in celosia argentea , cabbage, and banana leaf biomass. Among acids, sulphuric is the most effective, enhancing calorific value by up to 31.83% in rice stalks and watermelon biomasses, while hydrochloric achieves ash reduction of up to 96.26% in corn and soybean stalks. Briquettes for industrial application are classified according to DIN 51731 and ISO 17225 (class I1-I3 for industrial and B for standardized domestic heating) by ash content < 4%, moisture < 13%, volatile matter < 40%, net calorific value ≥ 14.5 MJ/kg, nitrogen < 0.6%, and sulphur < 0.8%. Despite demonstrated improvements, inhibitor formation, effluent disposal, and equipment corrosion hinder real-world application. Future research should optimize chemical treatment concentrations for heterogeneous biomasses and conduct post-treatment briquette analysis, including environmental and techno-economic implications.
- Open Access
- 23 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Investigation of multi-performance optimization of banana/bark cloth reinforced epoxy composites using grey relational analysis for automotive interior applications
This study presents a novel multi-performance optimization of underexplored hybrid banana- and bark-cloth fiber-reinforced epoxy composites for automotive interior applications, using Grey Relational Analysis (GRA). Unlike previous studies that mainly examine banana fiber alone or other conventional natural fiber hybrids, the present work investigates the synergistic combination of banana fiber and bark cloth in an epoxy matrix with 5 wt% aluminium trihydrate (ATH) to simultaneously improve mechanical performance, flame resistance, and moisture-related durability. The composites were produced through compression moulding with varying fiber ratios, and their tensile, flexural, impact, flammability, and water absorption behaviours were systematically evaluated. Among the tested configurations, Sample C7 (40% banana, 5% bark cloth) exhibited the best overall performance, with tensile strength of 28.29 MPa, flexural strength of 37.86 MPa, specific impact energy of 106.92 J/g, and a burning rate of 1.053 mm/s. GRA was used to rank the composite formulations based on multiple response criteria, identifying C7 as the optimal configuration. SEM, EDAX, and FTIR analyses further confirmed improved fibre-matrix interaction, additive retention, and chemical compatibility. The findings demonstrate the potential of banana/bark cloth hybrid composites as sustainable multifunctional materials for automotive interiors.
- 23 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessInvestigation of multi-performance optimization of banana/bark cloth reinforced epoxy composites using grey relational analysis for automotive interior applications
This study presents a novel multi-performance optimization of underexplored hybrid banana- and bark-cloth fiber-reinforced epoxy composites for automotive interior applications, using Grey Relational Analysis (GRA). Unlike previous studies that mainly examine banana fiber alone or other conventional natural fiber hybrids, the present work investigates the synergistic combination of banana fiber and bark cloth in an epoxy matrix with 5 wt% aluminium trihydrate (ATH) to simultaneously improve mechanical performance, flame resistance, and moisture-related durability. The composites were produced through compression moulding with varying fiber ratios, and their tensile, flexural, impact, flammability, and water absorption behaviours were systematically evaluated. Among the tested configurations, Sample C7 (40% banana, 5% bark cloth) exhibited the best overall performance, with tensile strength of 28.29 MPa, flexural strength of 37.86 MPa, specific impact energy of 106.92 J/g, and a burning rate of 1.053 mm/s. GRA was used to rank the composite formulations based on multiple response criteria, identifying C7 as the optimal configuration. SEM, EDAX, and FTIR analyses further confirmed improved fibre-matrix interaction, additive retention, and chemical compatibility. The findings demonstrate the potential of banana/bark cloth hybrid composites as sustainable multifunctional materials for automotive interiors.
- Top Cited PapersOpen Access
- 2 February 2026
- Published by Springer Nature in Discover Applied Sciences
- Vol. 8 (3)
Critical review of biomass heterogeneity effects on briquette combustion
- 2 February 2026
- Published by Springer Nature in Discover Applied Sciences
- Vol. 8 (3)
Top Cited PapersOpen AccessCritical review of biomass heterogeneity effects on briquette combustion