Vasiliy V. Timoshenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vasiliy V. Timoshenko has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Diana V. Manukovskaya
Tananaev Institute of Chemistry—Subdivision of the Federal Research Centre «Kola Science Centre of the Russian Academy of Sciences», 184209 Apatity, Russia
3 shared publications - Mikhail V. Chernyavskiy
Lomonosov Moscow State University
3 shared publications - Andrey O. Kalashnikov
Murmansk Arctic University, Apatity Branch, 29, Lesnaya, 184209, Apatity, Russia.
2 shared publications Evgeniy A. Grachyov
Lomonosov Moscow State University
2 shared publications- Andrey Fedotov
Lomonosov Moscow State University
1 shared publication - Andrey Morkovkin
Skolkovo Institute of Science and Technology Center for Petroleum Science and Engineering Moscow Russia
1 shared publication
Latest Publications
- Open Access
- 24 August 2026
- Published by MDPI AG in Mathematics
- Vol. 14 (17) , 3036
Mathematical Pipeline for Quantitative Analysis of Multiphase 3D Material Structures Using Fractal, Topological, and Minkowski Descriptors
Three-dimensional images of multiphase natural and engineered materials obtained by X-ray micro-computed tomography require quantitative processing methods that can describe not only phase volume but also connectivity, spatial heterogeneity, and anisotropy. In this article, X-ray micro-computed tomography is abbreviated as X-CT. Scalar descriptors such as fractal dimension, Betti numbers, Euler characteristic, and Minkowski functionals provide compact phase-level summaries of segmented X-CT data, but they do not encode where structural heterogeneity occurs, whether connectivity is directionally spanning, how finite sample boundaries affect topological measurements, or how surface-normal orientation is distributed. We propose a unified methodological framework that extends scalar topological and Minkowski-functional analysis of segmented multiphase 3D images by adding cut-response analysis, including its boundary-sensitivity interpretation, directional connectivity and orientation descriptors, and the rank-two surface Minkowski tensor . The framework is demonstrated on a previously published segmented geological X-CT volume used as a benchmark multiphase geometry with four X-ray-density phases and on synthetic validation geometries with analytically known topology. The results show that the proposed extensions reveal spatial sensitivity, boundary-to-boundary connectivity, and surface fabric that are not captured by scalar phase-level invariants alone. The proposed framework can be used to analyze segmented 3D images of multiphase geological, porous, composite, and engineered samples, thereby expanding quantitative knowledge about their internal structure beyond scalar phase-level descriptors.- 24 August 2026
- Published by MDPI AG in Mathematics
- Vol. 14 (17) , 3036
Open AccessMathematical Pipeline for Quantitative Analysis of Multiphase 3D Material Structures Using Fractal, Topological, and Minkowski Descriptors
Three-dimensional images of multiphase natural and engineered materials obtained by X-ray micro-computed tomography require quantitative processing methods that can describe not only phase volume but also connectivity, spatial heterogeneity, and anisotropy. In this article, X-ray micro-computed tomography is abbreviated as X-CT. Scalar descriptors such as fractal dimension, Betti numbers, Euler characteristic, and Minkowski functionals provide compact phase-level summaries of segmented X-CT data, but they do not encode where structural heterogeneity occurs, whether connectivity is directionally spanning, how finite sample boundaries affect topological measurements, or how surface-normal orientation is distributed. We propose a unified methodological framework that extends scalar topological and Minkowski-functional analysis of segmented multiphase 3D images by adding cut-response analysis, including its boundary-sensitivity interpretation, directional connectivity and orientation descriptors, and the rank-two surface Minkowski tensor . The framework is demonstrated on a previously published segmented geological X-CT volume used as a benchmark multiphase geometry with four X-ray-density phases and on synthetic validation geometries with analytically known topology. The results show that the proposed extensions reveal spatial sensitivity, boundary-to-boundary connectivity, and surface fabric that are not captured by scalar phase-level invariants alone. The proposed framework can be used to analyze segmented 3D images of multiphase geological, porous, composite, and engineered samples, thereby expanding quantitative knowledge about their internal structure beyond scalar phase-level descriptors. - Open Access
- 27 March 2026
- Published by Georesursy LLC in Georesursy
- Vol. 28 (1) , 3-18
Mean Velocity Calculation for Single-Phase Flow in Porous Media Based on Minkowski Functionals
Studies of flow dynamics in complex disordered media are very important in many practical areas, such as materials science, soil science, groundwater engineering, chemical engineering, and especially petroleum and gas engineering. Integral geometry methods are a useful tool for studying complex media. In this work, it is shown that, for a given porous media class, the by-layer mean flow velocity for any sample within the same class can be characterized as a function of Minkowski functionals, allowing to avoid costly natural core flood experiments or numerical simulation for screening purposes. This paper proposes the flow characterization method based on integral geometry. This method allows for obtaining the single-phase fluid flow velocity characterization models across a wide range of porous media classes for a quick estimation of the mean by-layer velocity distribution purely by extracting the geometrical measures from binary sample images. Samples from gas reservoirs are chosen as the relevant porous media examples, with regard to the growing importance of this type of reservoir caused by the global shift towards natural gas as a key energy source. Direct comparison with numerical simulation based on Stokes equation was made with commercial class software. The results demonstrate that the proposed algorithm has a relatively high degree of statistical significance and closely captures mean velocity trends. That provides a useful tool for quick, robust modelling for screening, agile calculations, and upscaling tasks.
- 27 March 2026
- Published by Georesursy LLC in Georesursy
- Vol. 28 (1) , 3-18
Open AccessMean Velocity Calculation for Single-Phase Flow in Porous Media Based on Minkowski Functionals
Studies of flow dynamics in complex disordered media are very important in many practical areas, such as materials science, soil science, groundwater engineering, chemical engineering, and especially petroleum and gas engineering. Integral geometry methods are a useful tool for studying complex media. In this work, it is shown that, for a given porous media class, the by-layer mean flow velocity for any sample within the same class can be characterized as a function of Minkowski functionals, allowing to avoid costly natural core flood experiments or numerical simulation for screening purposes. This paper proposes the flow characterization method based on integral geometry. This method allows for obtaining the single-phase fluid flow velocity characterization models across a wide range of porous media classes for a quick estimation of the mean by-layer velocity distribution purely by extracting the geometrical measures from binary sample images. Samples from gas reservoirs are chosen as the relevant porous media examples, with regard to the growing importance of this type of reservoir caused by the global shift towards natural gas as a key energy source. Direct comparison with numerical simulation based on Stokes equation was made with commercial class software. The results demonstrate that the proposed algorithm has a relatively high degree of statistical significance and closely captures mean velocity trends. That provides a useful tool for quick, robust modelling for screening, agile calculations, and upscaling tasks.
- 26 December 2025
- Published by Kola Science Centre in Transaction Kola Science Centre
- Vol. 16 (4) , 159-162
ANALYSIS OF TOPOLOGICAL FEATURES OF THREE-DIMENSIONAL STRUCTURES USING X-μCT IMAGES
This study presents a method for quantitative description of the internal 3D structure of a natural sample (meimechite) based on integral geometry and algebraic topology. Microtomography (with 51 µm voxel resolution) was used as the source data. The image was segmented into phases according to X-ray density levels using the multi-Otsu method. For each phase, connected components were extracted, and invariant integral-geometric characteristics were computed — Minkowski functionals M₀–M₃ and their corresponding Betti numbers b₀, b₁, b₂. A segmentation quality classifier based on the behavior of M₀–M₂ was proposed and tested for stability. A detailed topological interpretation of combined phases allowed the identified topological signatures to be related to the geological and mineralogical features of the sample.
- 26 December 2025
- Published by Kola Science Centre in Transaction Kola Science Centre
- Vol. 16 (4) , 159-162
ANALYSIS OF TOPOLOGICAL FEATURES OF THREE-DIMENSIONAL STRUCTURES USING X-μCT IMAGES
This study presents a method for quantitative description of the internal 3D structure of a natural sample (meimechite) based on integral geometry and algebraic topology. Microtomography (with 51 µm voxel resolution) was used as the source data. The image was segmented into phases according to X-ray density levels using the multi-Otsu method. For each phase, connected components were extracted, and invariant integral-geometric characteristics were computed — Minkowski functionals M₀–M₃ and their corresponding Betti numbers b₀, b₁, b₂. A segmentation quality classifier based on the behavior of M₀–M₂ was proposed and tested for stability. A detailed topological interpretation of combined phases allowed the identified topological signatures to be related to the geological and mineralogical features of the sample.
- 12 November 2025
- Published by Kola Science Centre in Transaction Kola Science Centre
- Vol. 16 (1) , 268-273
OBTAINING A NUMERICAL ESTIMATE OF TOPOLOGICAL FEATURES OF A 3D STRUCTURE USING MINKOWSKI FUNCTIONALS USING X-μCT IMAGES
This study demonstrates how the application of Minkowski functionals (M0 — volume, M1 – surface area, M2 — mean integral curvature, M3 — Euler-Poincaré characteristic) along with Betti numbers can reveal relationships between different object types (phases) within a shared volume. We showcase the use of Minkowski functionals and Betti numbers for characterizing the internal structure of complex materials, exemplified by minerals from a natural geological sample (meimechite, Kontozero Complex). The significant advantage of the presented approach is its ability to provide quantitative characterization of the topological and morphological properties of the phases. The image used for analysis via algebraic topology and integral geometry was acquired using X-ray computed microtomography (X-ray μCT).
- 12 November 2025
- Published by Kola Science Centre in Transaction Kola Science Centre
- Vol. 16 (1) , 268-273
OBTAINING A NUMERICAL ESTIMATE OF TOPOLOGICAL FEATURES OF A 3D STRUCTURE USING MINKOWSKI FUNCTIONALS USING X-μCT IMAGES
This study demonstrates how the application of Minkowski functionals (M0 — volume, M1 – surface area, M2 — mean integral curvature, M3 — Euler-Poincaré characteristic) along with Betti numbers can reveal relationships between different object types (phases) within a shared volume. We showcase the use of Minkowski functionals and Betti numbers for characterizing the internal structure of complex materials, exemplified by minerals from a natural geological sample (meimechite, Kontozero Complex). The significant advantage of the presented approach is its ability to provide quantitative characterization of the topological and morphological properties of the phases. The image used for analysis via algebraic topology and integral geometry was acquired using X-ray computed microtomography (X-ray μCT).