Xuefeng Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xuefeng Zhang has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Chunbo Han
Beihang University
3 shared publications - Xueping Xu
Beihang University
3 shared publications - Yi Liu
Department of Thoracic Surgery and Institute of Thoracic Oncology West China Hospital, Sichuan University Chengdu China
3 shared publications - Zhenkai Zhao
School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing, China
1 shared publication
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 7503906
Reverse Design of Cylindrical Uniform Magnetic Field Coils Based on Target Field Method and Its Optical Path Integration Optimization
Uniform field coils are a key factor influencing the performance and integration of SERF atomic magnetometers. To balance the requirements for high uniformity and the provision of an optical path within structural constraints, this study proposes a design method based on the target field method (TFM). This method is tailored for cylindrical radial uniform field coils and supports the integration of a central optical aperture. This method employs a Fourier series expansion to describe the surface current density on a predefined cylindrical geometry, establishes an inverse solution model by combining it with the target magnetic field distribution, and introduces Tikhonov regularization to overcome ill-posed issues during the solution process. Unlike conventional applications, this method incorporates a piecewise current density model and a central exclusion zone parameter z0. This allows for the flexible definition of current-free regions in the central area of the coil, thereby natively integrating the optical detection pathway. Using a cylindrical coil with a radius of 20 mm and a height of 50 mm as an example, two types of radial field-flattening coils were designed and fabricated: one without a central aperture and the other with a 5 mm optical aperture. Experimental results indicate that the coil without a central aperture achieved a volume fraction of 84.42% where magnetic field inhomogeneity within the target spherical region was better than 10-4, validating the effectiveness of this method in enhancing magnetic field uniformity. The design incorporating the optical aperture successfully maintained optical functionality whilst retaining relatively high uniformity. This study provides a highly reliable coil design scheme for miniaturized atomic magnetometers intended for wearable magnetoencephalography, balancing magnetic field performance with optical path integration.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 7503906
Reverse Design of Cylindrical Uniform Magnetic Field Coils Based on Target Field Method and Its Optical Path Integration Optimization
Uniform field coils are a key factor influencing the performance and integration of SERF atomic magnetometers. To balance the requirements for high uniformity and the provision of an optical path within structural constraints, this study proposes a design method based on the target field method (TFM). This method is tailored for cylindrical radial uniform field coils and supports the integration of a central optical aperture. This method employs a Fourier series expansion to describe the surface current density on a predefined cylindrical geometry, establishes an inverse solution model by combining it with the target magnetic field distribution, and introduces Tikhonov regularization to overcome ill-posed issues during the solution process. Unlike conventional applications, this method incorporates a piecewise current density model and a central exclusion zone parameter z0. This allows for the flexible definition of current-free regions in the central area of the coil, thereby natively integrating the optical detection pathway. Using a cylindrical coil with a radius of 20 mm and a height of 50 mm as an example, two types of radial field-flattening coils were designed and fabricated: one without a central aperture and the other with a 5 mm optical aperture. Experimental results indicate that the coil without a central aperture achieved a volume fraction of 84.42% where magnetic field inhomogeneity within the target spherical region was better than 10-4, validating the effectiveness of this method in enhancing magnetic field uniformity. The design incorporating the optical aperture successfully maintained optical functionality whilst retaining relatively high uniformity. This study provides a highly reliable coil design scheme for miniaturized atomic magnetometers intended for wearable magnetoencephalography, balancing magnetic field performance with optical path integration.
- 9 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-9
Polynomial Fitting-Based Design Method for Nonuniform Dynamic Magnetic Field Compensation Coils
Magnetic shielding is the key technology to create a near-zero magnetic environment. Nevertheless, the inherent characteristics of passive magnetic shielding result in a residual field that is generally nonuniform and highly vulnerable to interference by environmental magnetic fields. To achieve a stable, low-remanence near-zero magnetic environment, this study proposes a design method for magnetic compensation coils capable of dynamically compensating nonuniform residual fields in the magnetic shielded room (MSR). A polynomial is defined for fitting the residual field distribution. Applying the principle of shared symmetry, the polynomial terms are grouped, leading to the design of a nonuniform magnetic compensation coil system comprising five biplanar coils. Simulations and experiments show that the proposed coils can achieve effective compensation of irregular nonuniform magnetic field distributions through adjustment of the applied current and have effective dynamic compensation performance for alternating magnetic fields within the [1, 0.01] Hz frequency band. Compared with a compensation approach relying solely on the superposition of uniform and gradient field, the proposed nonuniform coils system exhibits superior adaptability to the irregular magnetic fields. This work provides a method for the design of single-axis dynamic nonuniform magnetic compensation coils and further establishes a scalable framework for three-axis nonuniform magnetic compensation.
- 9 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-9
Polynomial Fitting-Based Design Method for Nonuniform Dynamic Magnetic Field Compensation Coils
Magnetic shielding is the key technology to create a near-zero magnetic environment. Nevertheless, the inherent characteristics of passive magnetic shielding result in a residual field that is generally nonuniform and highly vulnerable to interference by environmental magnetic fields. To achieve a stable, low-remanence near-zero magnetic environment, this study proposes a design method for magnetic compensation coils capable of dynamically compensating nonuniform residual fields in the magnetic shielded room (MSR). A polynomial is defined for fitting the residual field distribution. Applying the principle of shared symmetry, the polynomial terms are grouped, leading to the design of a nonuniform magnetic compensation coil system comprising five biplanar coils. Simulations and experiments show that the proposed coils can achieve effective compensation of irregular nonuniform magnetic field distributions through adjustment of the applied current and have effective dynamic compensation performance for alternating magnetic fields within the [1, 0.01] Hz frequency band. Compared with a compensation approach relying solely on the superposition of uniform and gradient field, the proposed nonuniform coils system exhibits superior adaptability to the irregular magnetic fields. This work provides a method for the design of single-axis dynamic nonuniform magnetic compensation coils and further establishes a scalable framework for three-axis nonuniform magnetic compensation.