Liwei Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Liwei Chen has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Jiayue Sun
School of Mechanical Engineering, Hebei University of Architecture, Zhangjiakou 075000, China
1 shared publication - Xiaolong Cui
School of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
1 shared publication - Zehua Zhang
School of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
1 shared publication - Zhanlin Li
Science and Technology on Thermostructural Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an 710072, China
1 shared publication - Zhiyuan Wan
School of Mechanical Engineering, Shandong Huayu University of Technology, Dezhou 253034, China
1 shared publication
Latest Publications
- Open Access
Regulation Mechanism of Aluminum Concentration on the Structure, Morphology, and Hydrogen Barrier Performance of ZrO2/Al2O3-CeO2 Composite Coatings
To address the inherent drawbacks of micro-arc oxidation (MAO), this study employed MAO combined with sol–gel processing to fabricate ZrO2/Al2O3-CeO2 composite coatings on ZrH1.8 surfaces, aiming to solve the hydrogen evolution problem of zirconium hydride (ZrH1.8) materials in high-temperature environments. By adjusting the aluminum concentration in the sol (0.1~0.5 mol/L), a series of composite thin films were prepared on the ZrH1.8 surface using MAO combined with dip-coating, and their surface morphology and phase composition were characterized. The microstructure, morphology, and hydrogen barrier performance of the thin films were systematically analyzed using scanning electron microscopy (SEM), XRD, laser confocal microscopy, and quadrupole mass spectrometry. The results showed that the composite coating had a low surface porosity, with a maximum hydrogen permeation reduction factor (PRF) of 18.1. When the aluminum concentration was 0.4 mol/L, the relative content of tetragonal ZrO2 (T-ZrO2) reached 13.88%, the surface porosity was as low as 4.87%, and the initial temperature of hydrogen loss was increased to 730 °C. Mechanism analysis indicated that CeO2 may stabilize the tetragonal phase (T-ZrO2) of ZrO2 through solid solution effects and inhibit the phase transformation to monoclinic phase (M-ZrO2), thereby reducing cracks caused by volume expansion. Meanwhile, the synergistic effect of the MAO densified layer and the sol–gel sealed porous layer significantly reduced the coating porosity and blocked hydrogen diffusion paths, thus achieving excellent hydrogen barrier performance under high-temperature conditions.
Open AccessRegulation Mechanism of Aluminum Concentration on the Structure, Morphology, and Hydrogen Barrier Performance of ZrO2/Al2O3-CeO2 Composite Coatings
To address the inherent drawbacks of micro-arc oxidation (MAO), this study employed MAO combined with sol–gel processing to fabricate ZrO2/Al2O3-CeO2 composite coatings on ZrH1.8 surfaces, aiming to solve the hydrogen evolution problem of zirconium hydride (ZrH1.8) materials in high-temperature environments. By adjusting the aluminum concentration in the sol (0.1~0.5 mol/L), a series of composite thin films were prepared on the ZrH1.8 surface using MAO combined with dip-coating, and their surface morphology and phase composition were characterized. The microstructure, morphology, and hydrogen barrier performance of the thin films were systematically analyzed using scanning electron microscopy (SEM), XRD, laser confocal microscopy, and quadrupole mass spectrometry. The results showed that the composite coating had a low surface porosity, with a maximum hydrogen permeation reduction factor (PRF) of 18.1. When the aluminum concentration was 0.4 mol/L, the relative content of tetragonal ZrO2 (T-ZrO2) reached 13.88%, the surface porosity was as low as 4.87%, and the initial temperature of hydrogen loss was increased to 730 °C. Mechanism analysis indicated that CeO2 may stabilize the tetragonal phase (T-ZrO2) of ZrO2 through solid solution effects and inhibit the phase transformation to monoclinic phase (M-ZrO2), thereby reducing cracks caused by volume expansion. Meanwhile, the synergistic effect of the MAO densified layer and the sol–gel sealed porous layer significantly reduced the coating porosity and blocked hydrogen diffusion paths, thus achieving excellent hydrogen barrier performance under high-temperature conditions.
- Open Access
Optimization of In Situ CO2 Oxidation Temperature for Hydrogen-Resistant ZrO2 Films on Zirconium Hydride
Zirconium hydride is susceptible to dehydrogenation at elevated temperatures. In this study, zirconium hydride was oxidized by in situ oxidation in a CO2 atmosphere at temperatures ranging from 550 to 700 °C for 10 h. The morphology, elemental distribution, phase structure, and hydrogen barrier performance of the resulting oxide films were systematically characterized using SEM, EDS, XRD, film adhesion and microhardness tests, and dehydrogenation experiments. At 550–600 °C, the formed oxide films are thin and non-uniform, containing numerous micropores and cracks, which results in limited hydrogen barrier performance. When the oxidation temperature is increased to 650 °C, a better balance between the oxidation reaction and diffusion processes is achieved. This leads to the formation of a dense, continuous, and uniform ZrO2 film with strong adhesion to the substrate. As a result, the initial dehydrogenation temperature increases to 660 °C, while both the dehydrogenation rate and cumulative hydrogen release are significantly reduced, indicating the best overall hydrogen resistance. However, further increasing the oxidation temperature to 700 °C causes an excessively high oxidation rate, which introduces large growth and thermal stresses. These stresses promote the formation of microcracks in the oxide film, weaken the interfacial bonding strength, and consequently reduce the hydrogen barrier performance. The results demonstrate that the hydrogen permeation resistance of the oxide film is mainly governed by film compactness, defect evolution, and interfacial integrity. Based on these findings, 650 °C is identified as the optimal processing temperature for producing a high-quality hydrogen-resistant ZrO2 film on zirconium hydride under a CO2 atmosphere.
Open AccessOptimization of In Situ CO2 Oxidation Temperature for Hydrogen-Resistant ZrO2 Films on Zirconium Hydride
Zirconium hydride is susceptible to dehydrogenation at elevated temperatures. In this study, zirconium hydride was oxidized by in situ oxidation in a CO2 atmosphere at temperatures ranging from 550 to 700 °C for 10 h. The morphology, elemental distribution, phase structure, and hydrogen barrier performance of the resulting oxide films were systematically characterized using SEM, EDS, XRD, film adhesion and microhardness tests, and dehydrogenation experiments. At 550–600 °C, the formed oxide films are thin and non-uniform, containing numerous micropores and cracks, which results in limited hydrogen barrier performance. When the oxidation temperature is increased to 650 °C, a better balance between the oxidation reaction and diffusion processes is achieved. This leads to the formation of a dense, continuous, and uniform ZrO2 film with strong adhesion to the substrate. As a result, the initial dehydrogenation temperature increases to 660 °C, while both the dehydrogenation rate and cumulative hydrogen release are significantly reduced, indicating the best overall hydrogen resistance. However, further increasing the oxidation temperature to 700 °C causes an excessively high oxidation rate, which introduces large growth and thermal stresses. These stresses promote the formation of microcracks in the oxide film, weaken the interfacial bonding strength, and consequently reduce the hydrogen barrier performance. The results demonstrate that the hydrogen permeation resistance of the oxide film is mainly governed by film compactness, defect evolution, and interfacial integrity. Based on these findings, 650 °C is identified as the optimal processing temperature for producing a high-quality hydrogen-resistant ZrO2 film on zirconium hydride under a CO2 atmosphere.