Zhiyuan Wan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhiyuan Wan has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Jiayue Sun
School of Mechanical Engineering, Hebei University of Architecture, Zhangjiakou 075000, China
1 shared publication - Liwei Chen
School of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
1 shared publication - Zehua Zhang
School of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
1 shared publication
Latest Publications
- Open Access
Regulation Mechanism of Aluminum Concentration on the Structure, Morphology, and Hydrogen Barrier Performance of ZrO2/Al2O3-CeO2 Composite Coatings
To address the inherent drawbacks of micro-arc oxidation (MAO), this study employed MAO combined with sol–gel processing to fabricate ZrO2/Al2O3-CeO2 composite coatings on ZrH1.8 surfaces, aiming to solve the hydrogen evolution problem of zirconium hydride (ZrH1.8) materials in high-temperature environments. By adjusting the aluminum concentration in the sol (0.1~0.5 mol/L), a series of composite thin films were prepared on the ZrH1.8 surface using MAO combined with dip-coating, and their surface morphology and phase composition were characterized. The microstructure, morphology, and hydrogen barrier performance of the thin films were systematically analyzed using scanning electron microscopy (SEM), XRD, laser confocal microscopy, and quadrupole mass spectrometry. The results showed that the composite coating had a low surface porosity, with a maximum hydrogen permeation reduction factor (PRF) of 18.1. When the aluminum concentration was 0.4 mol/L, the relative content of tetragonal ZrO2 (T-ZrO2) reached 13.88%, the surface porosity was as low as 4.87%, and the initial temperature of hydrogen loss was increased to 730 °C. Mechanism analysis indicated that CeO2 may stabilize the tetragonal phase (T-ZrO2) of ZrO2 through solid solution effects and inhibit the phase transformation to monoclinic phase (M-ZrO2), thereby reducing cracks caused by volume expansion. Meanwhile, the synergistic effect of the MAO densified layer and the sol–gel sealed porous layer significantly reduced the coating porosity and blocked hydrogen diffusion paths, thus achieving excellent hydrogen barrier performance under high-temperature conditions.
Open AccessRegulation Mechanism of Aluminum Concentration on the Structure, Morphology, and Hydrogen Barrier Performance of ZrO2/Al2O3-CeO2 Composite Coatings
To address the inherent drawbacks of micro-arc oxidation (MAO), this study employed MAO combined with sol–gel processing to fabricate ZrO2/Al2O3-CeO2 composite coatings on ZrH1.8 surfaces, aiming to solve the hydrogen evolution problem of zirconium hydride (ZrH1.8) materials in high-temperature environments. By adjusting the aluminum concentration in the sol (0.1~0.5 mol/L), a series of composite thin films were prepared on the ZrH1.8 surface using MAO combined with dip-coating, and their surface morphology and phase composition were characterized. The microstructure, morphology, and hydrogen barrier performance of the thin films were systematically analyzed using scanning electron microscopy (SEM), XRD, laser confocal microscopy, and quadrupole mass spectrometry. The results showed that the composite coating had a low surface porosity, with a maximum hydrogen permeation reduction factor (PRF) of 18.1. When the aluminum concentration was 0.4 mol/L, the relative content of tetragonal ZrO2 (T-ZrO2) reached 13.88%, the surface porosity was as low as 4.87%, and the initial temperature of hydrogen loss was increased to 730 °C. Mechanism analysis indicated that CeO2 may stabilize the tetragonal phase (T-ZrO2) of ZrO2 through solid solution effects and inhibit the phase transformation to monoclinic phase (M-ZrO2), thereby reducing cracks caused by volume expansion. Meanwhile, the synergistic effect of the MAO densified layer and the sol–gel sealed porous layer significantly reduced the coating porosity and blocked hydrogen diffusion paths, thus achieving excellent hydrogen barrier performance under high-temperature conditions.