Pengxu An
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pengxu An has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Qiuyang Zhao
State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
2 shared publications - Chuanrui Che
Research Institute of Petroleum Engineering Technology, SINOPEC Shengli Oilfield Company, Dongying 257000, China
1 shared publication - Chunning Gao
Research Institute of Exploration and Development, Changqing Oilfield Company, Petro China, Xi’an 710021, China
1 shared publication - Congbo Gou
Research Institute of Exploration and Development, Changqing Oilfield Company, Petro China, Xi’an 710021, China
1 shared publication - Congkun Ren
Research Institute of Petroleum Engineering Technology, SINOPEC Shengli Oilfield Company, Dongying 257000, China
1 shared publication - Hailong Zhang
State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication
Latest Publications
- Open Access
Experimental Study on Oxygen-Reduced Air Foam Flooding in Ultra-Low-Permeability Reservoirs: From Sensitivity Analysis and Decomposition of Oil Recovery to Pore-Scale Seepage Mechanisms
Mature domestic continental low-permeability oil reservoirs in China have generally entered the ultra-high water-cut and high-recovery stage. Complex reservoir heterogeneity, development characteristics prone to gas channeling, and unclear seepage mechanisms of air foam flooding present engineering challenges to efficient development. To address these issues, this study investigates oxygen-reduced air foam flooding in the Chang-6 ultra-low-permeability sandstone reservoir in the WY block of Changqing Oilfield. The microscopic pore network was characterized using high-pressure mercury intrusion, BET (Brunauer-Emmett-Teller) nitrogen adsorption, and scanning electron microscopy. Changes in reservoir and fluid physicochemical characteristics before and after development were evaluated using the sessile drop method, pendant drop method, and Wilhelmy plate method. Core-flooding experiments were performed to confirm preferred key injection parameters, quantitatively decompose individual enhanced oil recovery mechanisms, and verify pore-scale seepage mechanisms via online nuclear magnetic resonance. The results reveal multi-scale pore network characteristics of the target reservoir and confirm the significant reduction in oil–water interfacial tension during foam flooding. Parameter sensitivity analysis identifies preferred operating conditions within the investigated experimental range, including an injection velocity of 0.2–0.3 mL/min, a foaming-agent concentration of 0.4–0.5%, a gas-to-liquid ratio of 2:1, and a 5-cycle slug schedule. Oil recovery decomposition analysis indicates that ultimate oil recovery comprises a relative share of 77.63% from baseline waterflooding, 13.44% from surfactant-assisted oil mobilization, 6.45% from gas assistance, and 2.48% from physical foam plugging. Furthermore, online nuclear magnetic resonance T2 (Transverse relaxation time) spectrum analysis reveals distinct permeability-dependent air foam flow regimes: as permeability decreases, flow behavior transitions from smooth foam propagation with concurrent oil washing and plugging, to the formation of dynamic foam plugging, and finally to severe shear-induced foam destruction in narrow throats that causes air foam flooding to fail. This study provides preferred injection parameters and theoretical grounds for mechanism decomposition in air foam enhanced oil recovery for ultra-low-permeability reservoirs, offering key insights into air foam seepage behavior.
Open AccessExperimental Study on Oxygen-Reduced Air Foam Flooding in Ultra-Low-Permeability Reservoirs: From Sensitivity Analysis and Decomposition of Oil Recovery to Pore-Scale Seepage Mechanisms
Mature domestic continental low-permeability oil reservoirs in China have generally entered the ultra-high water-cut and high-recovery stage. Complex reservoir heterogeneity, development characteristics prone to gas channeling, and unclear seepage mechanisms of air foam flooding present engineering challenges to efficient development. To address these issues, this study investigates oxygen-reduced air foam flooding in the Chang-6 ultra-low-permeability sandstone reservoir in the WY block of Changqing Oilfield. The microscopic pore network was characterized using high-pressure mercury intrusion, BET (Brunauer-Emmett-Teller) nitrogen adsorption, and scanning electron microscopy. Changes in reservoir and fluid physicochemical characteristics before and after development were evaluated using the sessile drop method, pendant drop method, and Wilhelmy plate method. Core-flooding experiments were performed to confirm preferred key injection parameters, quantitatively decompose individual enhanced oil recovery mechanisms, and verify pore-scale seepage mechanisms via online nuclear magnetic resonance. The results reveal multi-scale pore network characteristics of the target reservoir and confirm the significant reduction in oil–water interfacial tension during foam flooding. Parameter sensitivity analysis identifies preferred operating conditions within the investigated experimental range, including an injection velocity of 0.2–0.3 mL/min, a foaming-agent concentration of 0.4–0.5%, a gas-to-liquid ratio of 2:1, and a 5-cycle slug schedule. Oil recovery decomposition analysis indicates that ultimate oil recovery comprises a relative share of 77.63% from baseline waterflooding, 13.44% from surfactant-assisted oil mobilization, 6.45% from gas assistance, and 2.48% from physical foam plugging. Furthermore, online nuclear magnetic resonance T2 (Transverse relaxation time) spectrum analysis reveals distinct permeability-dependent air foam flow regimes: as permeability decreases, flow behavior transitions from smooth foam propagation with concurrent oil washing and plugging, to the formation of dynamic foam plugging, and finally to severe shear-induced foam destruction in narrow throats that causes air foam flooding to fail. This study provides preferred injection parameters and theoretical grounds for mechanism decomposition in air foam enhanced oil recovery for ultra-low-permeability reservoirs, offering key insights into air foam seepage behavior.
- Open Access
Numerical Simulation and Optimization of Polyacrylamide Solution Flow in a Polymer Injector Using an Improved Viscosity Constitutive Model
Previous numerical simulations of polymer injectors often rely on fixed-viscosity models, which fail to accurately capture the severe shear degradation of non-Newtonian fluids under high-shear throttling conditions. To address this limitation and enhance polymer flooding efficiency, this study proposes an improved Carreau–Yasuda viscosity constitutive model to precisely simulate the flow behavior of polyacrylamide (HPAM) solutions. A comprehensive computational fluid dynamics (CFD) model was developed and validated, showing a viscosity prediction error of less than 8.6% across a wide shear rate range (0.1–10,000 s−1). Based on this dynamic rheological model, the internal flow channel of the injector was optimized, resulting in a novel spindle-type throttling unit. Simulation and field validation results demonstrate that the optimized structure achieves a significant pressure drop of 6.03 MPa at an injection flow rate of 96 m3/d—representing a 65% improvement over traditional designs—while successfully maintaining a viscosity retention rate above 85%. This research overcomes the traditional design conflict between high pressure reduction and viscosity preservation, providing an accurate numerical framework and practical guidance for engineering high-flow, robust-throttling polymer injectors.
Open AccessNumerical Simulation and Optimization of Polyacrylamide Solution Flow in a Polymer Injector Using an Improved Viscosity Constitutive Model
Previous numerical simulations of polymer injectors often rely on fixed-viscosity models, which fail to accurately capture the severe shear degradation of non-Newtonian fluids under high-shear throttling conditions. To address this limitation and enhance polymer flooding efficiency, this study proposes an improved Carreau–Yasuda viscosity constitutive model to precisely simulate the flow behavior of polyacrylamide (HPAM) solutions. A comprehensive computational fluid dynamics (CFD) model was developed and validated, showing a viscosity prediction error of less than 8.6% across a wide shear rate range (0.1–10,000 s−1). Based on this dynamic rheological model, the internal flow channel of the injector was optimized, resulting in a novel spindle-type throttling unit. Simulation and field validation results demonstrate that the optimized structure achieves a significant pressure drop of 6.03 MPa at an injection flow rate of 96 m3/d—representing a 65% improvement over traditional designs—while successfully maintaining a viscosity retention rate above 85%. This research overcomes the traditional design conflict between high pressure reduction and viscosity preservation, providing an accurate numerical framework and practical guidance for engineering high-flow, robust-throttling polymer injectors.