Go`zAl Yunusova
Go`zAl Yunusova has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Ayjamal Turambetova2 shared publications
- Dilrabo Muhammadiyeva2 shared publications
- Enrico Benassi
Infochemistry Scientific Center, ITMO University, Saint-Petersburg 191002, Russian Federation
2 shared publications - Feruzakhon Tojiboyeva
Department of Analytical Chemistry, National University of Uzbekistan named after Mirzo Ulugbek, Tashkent 100174, Uzbekistan
2 shared publications - Khilola Usmanova
University of Public Security of the Republic of Uzbekistan
2 shared publications - Mavjuda Rakhmatullaeva2 shared publications
Latest Publications
- Open Access
- 18 April 2026
- Published by Elsevier in SSRN Electronic Journal
Sorption–Spectroscopic Determination of Chromium (III) Ions Using Eriochrome Black T Immobilized on Silk Fibroin Fiber
Background:Chromium (III) ions are widely present in industrial and environmental waters, and their reliable determination is essential for environmental monitoring and pollution control. Conventional spectrophotometric methods often suffer from limited sensitivity, selectivity, and stability. To overcome these limitations, a sorption–spectrophotometric approach based on reagent immobilization was developed. In this study, Eriochrome Black T (EBT) was immobilized on silk fibroin fiber to enhance analytical performance in the determination of Cr(III) ions.Results:Immobilization of EBT significantly improved the stability, sensitivity, and selectivity of the method. Formation of the Cr(III)–EBT complex was confirmed by FT-IR spectroscopy (Cr–O band at 607 cm⁻¹), X-ray fluorescence analysis, and SEM-EDS, which indicated approximately 20 wt % chromium in the complex. Optimal analytical conditions were pH 8, λ = 618 nm, and a universal buffer. The method showed a detection limit of 1.2 µg L⁻¹, linearity in the range of 5–50 µg L⁻¹ (R² = 0.9991), and an analysis time of 10 min. Interference from Al³⁺, Co²⁺, and Cd²⁺ was effectively masked, while Ni²⁺, Fe³⁺, and Cu²⁺ caused no interference. Validation using industrial wastewater samples demonstrated relative errors ≤ 6 % and Sr ≤ 0.085.Significance:The developed sorption–spectrophotometric method provides a rapid, economical, and accurate approach for the determination of Cr(III) ions in environmental waters. Its high sensitivity, good selectivity, and successful application to real industrial wastewater samples indicate strong potential for routine laboratory analysis as well as field monitoring of chromium contamination.
- 18 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSorption–Spectroscopic Determination of Chromium (III) Ions Using Eriochrome Black T Immobilized on Silk Fibroin Fiber
Background:Chromium (III) ions are widely present in industrial and environmental waters, and their reliable determination is essential for environmental monitoring and pollution control. Conventional spectrophotometric methods often suffer from limited sensitivity, selectivity, and stability. To overcome these limitations, a sorption–spectrophotometric approach based on reagent immobilization was developed. In this study, Eriochrome Black T (EBT) was immobilized on silk fibroin fiber to enhance analytical performance in the determination of Cr(III) ions.Results:Immobilization of EBT significantly improved the stability, sensitivity, and selectivity of the method. Formation of the Cr(III)–EBT complex was confirmed by FT-IR spectroscopy (Cr–O band at 607 cm⁻¹), X-ray fluorescence analysis, and SEM-EDS, which indicated approximately 20 wt % chromium in the complex. Optimal analytical conditions were pH 8, λ = 618 nm, and a universal buffer. The method showed a detection limit of 1.2 µg L⁻¹, linearity in the range of 5–50 µg L⁻¹ (R² = 0.9991), and an analysis time of 10 min. Interference from Al³⁺, Co²⁺, and Cd²⁺ was effectively masked, while Ni²⁺, Fe³⁺, and Cu²⁺ caused no interference. Validation using industrial wastewater samples demonstrated relative errors ≤ 6 % and Sr ≤ 0.085.Significance:The developed sorption–spectrophotometric method provides a rapid, economical, and accurate approach for the determination of Cr(III) ions in environmental waters. Its high sensitivity, good selectivity, and successful application to real industrial wastewater samples indicate strong potential for routine laboratory analysis as well as field monitoring of chromium contamination.
- Open Access
- 7 March 2026
- Published by Elsevier in SSRN Electronic Journal
Sorption–Spectroscopic Determination of Chromium (III) Ions Using Eriochrome Black T Immobilized on Silk Fibroin Fiber
Background:Chromium (III) ions are widely present in industrial and environmental waters, and their reliable determination is essential for environmental monitoring and pollution control. Conventional spectrophotometric methods often suffer from limited sensitivity, selectivity, and stability. To overcome these limitations, a sorption–spectrophotometric approach based on reagent immobilization was developed. In this study, Eriochrome Black T (EBT) was immobilized on silk fibroin fiber to enhance analytical performance in the determination of Cr(III) ions. Results:Immobilization of EBT significantly improved the stability, sensitivity, and selectivity of the method. Formation of the Cr(III)–EBT complex was confirmed by FT-IR spectroscopy (Cr–O band at 607 cm⁻¹), X-ray fluorescence analysis, and SEM-EDS, which indicated approximately 20 wt % chromium in the complex. Optimal analytical conditions were pH 8, λ = 618 nm, and a universal buffer. The method showed a detection limit of 1.2 µg L⁻¹, linearity in the range of 5–50 µg L⁻¹ (R² = 0.9991), and an analysis time of 10 min. Interference from Al³⁺, Co²⁺, and Cd²⁺ was effectively masked, while Ni²⁺, Fe³⁺, and Cu²⁺ caused no interference. Validation using industrial wastewater samples demonstrated relative errors ≤ 6 % and Sr ≤ 0.085. Significance:The developed sorption–spectrophotometric method provides a rapid, economical, and accurate approach for the determination of Cr(III) ions in environmental waters. Its high sensitivity, good selectivity, and successful application to real industrial wastewater samples indicate strong potential for routine laboratory analysis as well as field monitoring of chromium contamination.
- 7 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSorption–Spectroscopic Determination of Chromium (III) Ions Using Eriochrome Black T Immobilized on Silk Fibroin Fiber
Background:Chromium (III) ions are widely present in industrial and environmental waters, and their reliable determination is essential for environmental monitoring and pollution control. Conventional spectrophotometric methods often suffer from limited sensitivity, selectivity, and stability. To overcome these limitations, a sorption–spectrophotometric approach based on reagent immobilization was developed. In this study, Eriochrome Black T (EBT) was immobilized on silk fibroin fiber to enhance analytical performance in the determination of Cr(III) ions. Results:Immobilization of EBT significantly improved the stability, sensitivity, and selectivity of the method. Formation of the Cr(III)–EBT complex was confirmed by FT-IR spectroscopy (Cr–O band at 607 cm⁻¹), X-ray fluorescence analysis, and SEM-EDS, which indicated approximately 20 wt % chromium in the complex. Optimal analytical conditions were pH 8, λ = 618 nm, and a universal buffer. The method showed a detection limit of 1.2 µg L⁻¹, linearity in the range of 5–50 µg L⁻¹ (R² = 0.9991), and an analysis time of 10 min. Interference from Al³⁺, Co²⁺, and Cd²⁺ was effectively masked, while Ni²⁺, Fe³⁺, and Cu²⁺ caused no interference. Validation using industrial wastewater samples demonstrated relative errors ≤ 6 % and Sr ≤ 0.085. Significance:The developed sorption–spectrophotometric method provides a rapid, economical, and accurate approach for the determination of Cr(III) ions in environmental waters. Its high sensitivity, good selectivity, and successful application to real industrial wastewater samples indicate strong potential for routine laboratory analysis as well as field monitoring of chromium contamination.