Alexey Morozov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexey Morozov has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Ayagma Zhargalova
Bauman Moscow State Technical University, Russian Federation
2 shared publications - Gleb Drach
Bauman Moscow State Technical University, Russian Federation
2 shared publications - Egor Rozhnov
Novosibirsk State Technical University, Russian Federation
1 shared publication - Ivan Yulusov
Novosibirsk State Technical University, Russian Federation
1 shared publication - Kristina Parts
Novosibirsk State Technical University, Russian Federation
1 shared publication - Semyon Papko
Novosibirsk State Technical University, Russian Federation
1 shared publication
Latest Publications
- 15 June 2026
- Published by Novosibirsk State Technical University in Metal Working and Material Science
- Vol. 28 (2)
Computer simulation and process engineering for machining thin-walled titanium hemispheres as part of a hybrid robotic module
Introduction. In aerospace engineering, thin-walled titanium spherical pressure vessels for high-pressure helium storage are manufactured by welding two precision-machined hemispheres. The geometric accuracy of the spherical surfaces and weld edge preparation determine leak tightness and service life under operating pressures up to 34 MPa and temperatures down to −196 °C. Due to their low stiffness, thin-walled hemispheres make machining critically dependent on locating charts, clamping forces, and cutting conditions. In the context of Industry 4.0 and the growing demand for hybrid equipment that integrates mechanical and surface-thermal operations, the development of modular robotic cells providing multifunctional machining with fewer re-clamping operations and increased flexibility has become highly relevant. However, existing design methodologies often fail to account for the multitasking nature, the complexity of preliminary studies, and the requirements for modularity and flexibility. The purpose of this work is to develop a machining process for thin-walled titanium hemispheres of spherical pressure vessels using computer simulation that ensures compliance with spherical surface accuracy and weld edge preparation requirements, and to improve machining efficiency by minimizing deformation risk, reducing the number of re clamping operations, and shortening process planning time when integrating the process into a modular robotic cell. Methods. Design and manufacturing requirements for the hemispheres were analyzed; cutting conditions were calculated taking into account the specific features of the titanium alloy Ti-6Al-4V machining; equipment was selected through a comparative assessment based on production efficiency criteria; and the proposed process was verified in the SprutCAM computer-aided process planning (CAPP) system, considering equipment kinematics. Results and Discussion. Surface finish and accuracy requirements were established: Ra 0.8 µm for the inner spherical surface and Ra 3.2 µm for the outer spherical surface. A process route sheet was developed to minimize re-clamping operations and reduce the risk of thin-walled shell deformation. Based on production efficiency criteria, the DN Solutions PUMA VTS 1214M vertical turn-mill center was selected, enabling combined turning and milling operations in a single setup, consistent with integral machining on a CNC lathe platform. A locating chart using a special ring-type axial clamping fixture was developed and visualized. Machining simulation confirmed the feasibility of the process route, correct setup planning, and the absence of tool–workpiece–fixture collisions, and indicated the potential for rapid process implementation. Conclusions. The results contribute to the development of theoretical foundations and conceptual approaches for designing hybrid machine tools that integrate mechanical and surface-thermal processing operations.
- 15 June 2026
- Published by Novosibirsk State Technical University in Metal Working and Material Science
- Vol. 28 (2)
Computer simulation and process engineering for machining thin-walled titanium hemispheres as part of a hybrid robotic module
Introduction. In aerospace engineering, thin-walled titanium spherical pressure vessels for high-pressure helium storage are manufactured by welding two precision-machined hemispheres. The geometric accuracy of the spherical surfaces and weld edge preparation determine leak tightness and service life under operating pressures up to 34 MPa and temperatures down to −196 °C. Due to their low stiffness, thin-walled hemispheres make machining critically dependent on locating charts, clamping forces, and cutting conditions. In the context of Industry 4.0 and the growing demand for hybrid equipment that integrates mechanical and surface-thermal operations, the development of modular robotic cells providing multifunctional machining with fewer re-clamping operations and increased flexibility has become highly relevant. However, existing design methodologies often fail to account for the multitasking nature, the complexity of preliminary studies, and the requirements for modularity and flexibility. The purpose of this work is to develop a machining process for thin-walled titanium hemispheres of spherical pressure vessels using computer simulation that ensures compliance with spherical surface accuracy and weld edge preparation requirements, and to improve machining efficiency by minimizing deformation risk, reducing the number of re clamping operations, and shortening process planning time when integrating the process into a modular robotic cell. Methods. Design and manufacturing requirements for the hemispheres were analyzed; cutting conditions were calculated taking into account the specific features of the titanium alloy Ti-6Al-4V machining; equipment was selected through a comparative assessment based on production efficiency criteria; and the proposed process was verified in the SprutCAM computer-aided process planning (CAPP) system, considering equipment kinematics. Results and Discussion. Surface finish and accuracy requirements were established: Ra 0.8 µm for the inner spherical surface and Ra 3.2 µm for the outer spherical surface. A process route sheet was developed to minimize re-clamping operations and reduce the risk of thin-walled shell deformation. Based on production efficiency criteria, the DN Solutions PUMA VTS 1214M vertical turn-mill center was selected, enabling combined turning and milling operations in a single setup, consistent with integral machining on a CNC lathe platform. A locating chart using a special ring-type axial clamping fixture was developed and visualized. Machining simulation confirmed the feasibility of the process route, correct setup planning, and the absence of tool–workpiece–fixture collisions, and indicated the potential for rapid process implementation. Conclusions. The results contribute to the development of theoretical foundations and conceptual approaches for designing hybrid machine tools that integrate mechanical and surface-thermal processing operations.
- 16 March 2026
- Published by Novosibirsk State Technical University in Metal Working and Material Science
- Vol. 28 (1)
Dynamic modeling and selection of rational parameters for a millstone mill mechanism to reduce energy consumption
Introduction. Millstone mills hold a special place among the grinding equipment used in the food industry, as they produce flour with a high content of biologically valuable grain components through the repeated action of working surfaces on the processed material. However, existing industrial designs of millstone units are characterized by significant energy consumption caused by the high moments of inertia of the rotating millstones. In the context of the ongoing drive toward import substitution and modernization of grain processing enterprises, there is a need to develop new energy-efficient equipment that meets modern requirements for productivity and specific energy consumption. Despite the long history of millstone mill application, the issues of selecting rational inertial-mass characteristics and design parameters of the rotating millstone and their influence on the dynamic parameters of the drive and support forces remain insufficiently studied. The purpose of this study is to reduce the power consumption of a millstone mill by developing a dynamic model of the mechanism and determining rational design and kinematic parameters of the unit. Methods. Based on D'Alembert's principle, a system of differential equations of motion was formulated for a shaft with a disk (millstone), taking into account the eccentricity of the rotation axis relative to the geometric axis of the millstone. The law of motion was determined by numerical integration using the fourth-order Runge–Kutta method with variation of the moments of inertia of the rotating millstone (25.185–40.388 kg•m²) and driving torques (250–500 N•m). Support forces were then calculated by solving matrix equations of static equilibrium , using the previously obtained kinematic characteristics. Finally, a parametric analysis of the influence of inter-supports distances and manufacturing accuracy on the magnitude of support forces was carried out. Results and Discussion. It was found that reducing the moment of inertia of the rotating millstone from 40.388 to 25.185 kg•m² leads to a decrease in shaft acceleration time to steady-state rotational speed from 12.2–15.7 s to 7.2–10.0 s and to a reduction in maximum support forces at the most loaded support from 1,000–1,700 N to 600–1,000 N over the driving torque range of 300–500 N•m. It was shown that the rational inter-support distance is 0.58 m, and the permissible displacement of the rotation axis relative to the geometric axis of the millstone should not exceed 0.5–1.0 mm, at which the maximum support force does not exceed 360–700 N. For the proposed design with a millstone moment of inertia of 25.185 kg•m² and a driving torque of 280–300 N•m, the power consumption at the drive shaft was 10.5 kW, which is 50% lower than that of the industrial mill AVR 6-890 (21 kW) at a comparable capacity of 490 kg/h. The obtained results demonstrate the feasibility of structural lightening of the rotating millstone as an effective strategy for improving the energy efficiency of millstone mills.
- 16 March 2026
- Published by Novosibirsk State Technical University in Metal Working and Material Science
- Vol. 28 (1)
Dynamic modeling and selection of rational parameters for a millstone mill mechanism to reduce energy consumption
Introduction. Millstone mills hold a special place among the grinding equipment used in the food industry, as they produce flour with a high content of biologically valuable grain components through the repeated action of working surfaces on the processed material. However, existing industrial designs of millstone units are characterized by significant energy consumption caused by the high moments of inertia of the rotating millstones. In the context of the ongoing drive toward import substitution and modernization of grain processing enterprises, there is a need to develop new energy-efficient equipment that meets modern requirements for productivity and specific energy consumption. Despite the long history of millstone mill application, the issues of selecting rational inertial-mass characteristics and design parameters of the rotating millstone and their influence on the dynamic parameters of the drive and support forces remain insufficiently studied. The purpose of this study is to reduce the power consumption of a millstone mill by developing a dynamic model of the mechanism and determining rational design and kinematic parameters of the unit. Methods. Based on D'Alembert's principle, a system of differential equations of motion was formulated for a shaft with a disk (millstone), taking into account the eccentricity of the rotation axis relative to the geometric axis of the millstone. The law of motion was determined by numerical integration using the fourth-order Runge–Kutta method with variation of the moments of inertia of the rotating millstone (25.185–40.388 kg•m²) and driving torques (250–500 N•m). Support forces were then calculated by solving matrix equations of static equilibrium , using the previously obtained kinematic characteristics. Finally, a parametric analysis of the influence of inter-supports distances and manufacturing accuracy on the magnitude of support forces was carried out. Results and Discussion. It was found that reducing the moment of inertia of the rotating millstone from 40.388 to 25.185 kg•m² leads to a decrease in shaft acceleration time to steady-state rotational speed from 12.2–15.7 s to 7.2–10.0 s and to a reduction in maximum support forces at the most loaded support from 1,000–1,700 N to 600–1,000 N over the driving torque range of 300–500 N•m. It was shown that the rational inter-support distance is 0.58 m, and the permissible displacement of the rotation axis relative to the geometric axis of the millstone should not exceed 0.5–1.0 mm, at which the maximum support force does not exceed 360–700 N. For the proposed design with a millstone moment of inertia of 25.185 kg•m² and a driving torque of 280–300 N•m, the power consumption at the drive shaft was 10.5 kW, which is 50% lower than that of the industrial mill AVR 6-890 (21 kW) at a comparable capacity of 490 kg/h. The obtained results demonstrate the feasibility of structural lightening of the rotating millstone as an effective strategy for improving the energy efficiency of millstone mills.