Alejandro Cordero
Research Subjects
Research Interests
Alejandro Cordero has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Eloisa Raluy-López
Physics of the Earth, Regional Campus of International Excellence (CEIR) “Campus Mare Nostrum”, University of Murcia, Murcia, Spain
4 shared publications - Juan Pedro Montávez
Universidad de Murcia (Murcia, Spain)
4 shared publications - Leandro Segado-Moreno
Physics of the Earth, Regional Campus of International Excellence (CEIR) “Campus Mare Nostrum", University of Murcia, Murcia, Spain
4 shared publications - Pedro Jiménez-Guerrero
Physics of the Earth, Regional Campus of International Excellence (CEIR) “Campus Mare Nostrum”, University of Murcia, Murcia, Spain
2 shared publications - Ginés Garnés-Morales
Department of Meteorology, University of Reading, Reading, United Kingdom
1 shared publication
Latest Publications
- Open Access
- 17 July 2026
- Published by Copernicus GmbH
Urban climate and air quality feedbacks: a high-resolution WRF-Chem study
Urban areas modify the exchanges of energy, moisture, and momentum between the surface and the atmosphere through the combined effects of materials, urban morphology, and anthropogenic emissions. These modifications influence both local meteorological conditions and air quality, generating a complex system of interactions. While urban climate affects the transport, dispersion, and accumulation of atmospheric pollutants, air pollution can also alter radiative processes and influence local meteorology, leading to a coupled atmosphere–chemistry system.This study investigates the interactions between urban climate and air quality over the metropolitan areas of Madrid and Murcia (Spain) using the WRF-Chem model. A set of high-resolution simulations was performed employing a one-way nested configuration, with an outer domain covering the Iberian Peninsula and two inner domains centered on the target cities. Pollutant emissions were represented using a high-resolution downscaled inventory that resolves major emission sources, including road networks, industrial areas, airports, and agricultural land uses. Four main experiment families were considered: rural and urban configurations, each with and without atmospheric chemistry. Additional sensitivity experiments were conducted to assess the impact of emission strength and urban representation.The experimental framework allows assessment of both the influence of urban processes on pollutant distributions and the impact of atmospheric composition on urban meteorology. Particular attention is paid to the role of urban canopy models in shaping near-surface thermal patterns and local circulations, as well as to the extent to which urban-induced meteorological modifications affect air-quality conditions across the metropolitan area.The results highlight the interactions between urban climate and atmospheric chemistry and emphasize the importance of realistically representing urban morphology and emissions in coupled modeling systems. Acknowledgments: The authors acknowledge the ARUBA project (PID2023-149080OB-I00/MCIN/AEI/10.13039/501100011033, Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain & FEDER, EU), and the INSIEME project (FSRM/10.13039/100007801). ERL thanks her predoctoral contract FPU (FPU21/02464) to the Ministerio de Universidades of Spain.
- 17 July 2026
- Published by Copernicus GmbH
Open AccessUrban climate and air quality feedbacks: a high-resolution WRF-Chem study
Urban areas modify the exchanges of energy, moisture, and momentum between the surface and the atmosphere through the combined effects of materials, urban morphology, and anthropogenic emissions. These modifications influence both local meteorological conditions and air quality, generating a complex system of interactions. While urban climate affects the transport, dispersion, and accumulation of atmospheric pollutants, air pollution can also alter radiative processes and influence local meteorology, leading to a coupled atmosphere–chemistry system.This study investigates the interactions between urban climate and air quality over the metropolitan areas of Madrid and Murcia (Spain) using the WRF-Chem model. A set of high-resolution simulations was performed employing a one-way nested configuration, with an outer domain covering the Iberian Peninsula and two inner domains centered on the target cities. Pollutant emissions were represented using a high-resolution downscaled inventory that resolves major emission sources, including road networks, industrial areas, airports, and agricultural land uses. Four main experiment families were considered: rural and urban configurations, each with and without atmospheric chemistry. Additional sensitivity experiments were conducted to assess the impact of emission strength and urban representation.The experimental framework allows assessment of both the influence of urban processes on pollutant distributions and the impact of atmospheric composition on urban meteorology. Particular attention is paid to the role of urban canopy models in shaping near-surface thermal patterns and local circulations, as well as to the extent to which urban-induced meteorological modifications affect air-quality conditions across the metropolitan area.The results highlight the interactions between urban climate and atmospheric chemistry and emphasize the importance of realistically representing urban morphology and emissions in coupled modeling systems. Acknowledgments: The authors acknowledge the ARUBA project (PID2023-149080OB-I00/MCIN/AEI/10.13039/501100011033, Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain & FEDER, EU), and the INSIEME project (FSRM/10.13039/100007801). ERL thanks her predoctoral contract FPU (FPU21/02464) to the Ministerio de Universidades of Spain.
- Open Access
- 17 July 2026
- Published by Copernicus GmbH
Improving the Spatial Representation of Emission Sources for Regional Air Quality Modelling
Accurate characterization of atmospheric pollution is essential for understanding its impacts on human health, ecosystems, and climate, as well as for supporting the development of effective air quality management strategies. Numerical atmosphere–chemistry models are powerful tools for studying pollutant dynamics and assessing mitigation measures. However, the quality of their predictions strongly depends on the accuracy of the emission inventories used as input.Most available emission inventories are provided at relatively coarse spatial resolutions, limiting their ability to represent the detailed distribution of emission sources, particularly in heterogeneous urban and regional environments. To address this limitation, we developed a methodology to generate very high-resolution emission fields from low-resolution inventories using a range of geospatial datasets. Emissions from different sectors are spatially redistributed according to their physical origin, including road networks for traffic emissions, airport infrastructure for aviation, industrial facilities for industrial sources, and land-use or population density datasets for other anthropogenic activities. The methodology also incorporates sector-specific vertical allocation and temporal profiles, allowing emissions to vary realistically at hourly, weekly, and seasonal scales.The methodology was evaluated over the Region of Murcia (southeastern Spain) by comparison with an independently developed high-resolution emission inventory. The results showed a good agreement between both datasets. Furthermore, air quality simulations driven by the old and new emissions were compared with observational data, demonstrating an improved representation of pollutant concentrations and confirming the potential of the proposed approach to enhance air quality modelling at regional scales.
- 17 July 2026
- Published by Copernicus GmbH
Open AccessImproving the Spatial Representation of Emission Sources for Regional Air Quality Modelling
Accurate characterization of atmospheric pollution is essential for understanding its impacts on human health, ecosystems, and climate, as well as for supporting the development of effective air quality management strategies. Numerical atmosphere–chemistry models are powerful tools for studying pollutant dynamics and assessing mitigation measures. However, the quality of their predictions strongly depends on the accuracy of the emission inventories used as input.Most available emission inventories are provided at relatively coarse spatial resolutions, limiting their ability to represent the detailed distribution of emission sources, particularly in heterogeneous urban and regional environments. To address this limitation, we developed a methodology to generate very high-resolution emission fields from low-resolution inventories using a range of geospatial datasets. Emissions from different sectors are spatially redistributed according to their physical origin, including road networks for traffic emissions, airport infrastructure for aviation, industrial facilities for industrial sources, and land-use or population density datasets for other anthropogenic activities. The methodology also incorporates sector-specific vertical allocation and temporal profiles, allowing emissions to vary realistically at hourly, weekly, and seasonal scales.The methodology was evaluated over the Region of Murcia (southeastern Spain) by comparison with an independently developed high-resolution emission inventory. The results showed a good agreement between both datasets. Furthermore, air quality simulations driven by the old and new emissions were compared with observational data, demonstrating an improved representation of pollutant concentrations and confirming the potential of the proposed approach to enhance air quality modelling at regional scales.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Improving dust emission in WRF-Chem GOCART scheme using a high-resolution erodibility dataset
Mineral dust is a major atmospheric aerosol, affecting climate, air quality, and human health through radiative and microphysical processes. The Iberian Peninsula is frequently impacted by dust intrusions from North Africa, leading to episodic exceedances of PM10 concentrations that challenge operational air quality forecasts. Accurate simulation of dust emission and transport remains difficult due to uncertainties in soil erodibility, land surface characteristics, and meteorological drivers.In this study, we assess the impact of two newly developed high-resolution soil erodibility datasets on regional dust simulations using WRF-Chem with the GOCART scheme. The first dataset, EROD, improves dust source representation by integrating fine-resolution topography (GMTED2010), achieving 0.0625° (≈5 km) resolution globally and 1 km locally for the Iberian Peninsula. The second dataset, SOILHD, further refines dust source characterization by incorporating local-scale soil composition (sand, silt, clay fractions) and removing areas erroneously classified as bare soil, reaching 1 km resolution globally. These datasets aim to capture the spatial heterogeneity of dust sources, which is critical in semi-arid regions with sparse vegetation and variable soil properties.We conduct WRF-Chem simulations for five periods between 2022 and 2025, representing a range of dust episodes with local and long-range transport. Model performance is evaluated against PM10 measurements from the SINQLAIR network across coastal and inland stations in the Region of Murcia. Results indicate that the high-resolution datasets substantially improve the spatial and temporal representation of dust emissions. Inland and low-anthropogenic-influence stations show better agreement with observed PM10 peaks in both magnitude and timing compared to simulations using standard coarse-resolution erodibility fields. At coastal and industrially influenced sites, improvements are more limited due to missing anthropogenic emissions and additional aerosol components, but statistical metrics such as correlation, Mean Bias Error (MBE), and Root Mean Square Error (RMSE) still indicate significant enhancement.Overall, the results demonstrate that high-resolution, type–aware soil erodibility datasets significantly enhance the skill of dust simulations in WRF-Chem, reducing biases and capturing observed variability more accurately. These findings underscore the importance of detailed soil and topographic information for regional dust modeling and highlight the potential benefits of incorporating such datasets into operational dust forecasting systems.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessImproving dust emission in WRF-Chem GOCART scheme using a high-resolution erodibility dataset
Mineral dust is a major atmospheric aerosol, affecting climate, air quality, and human health through radiative and microphysical processes. The Iberian Peninsula is frequently impacted by dust intrusions from North Africa, leading to episodic exceedances of PM10 concentrations that challenge operational air quality forecasts. Accurate simulation of dust emission and transport remains difficult due to uncertainties in soil erodibility, land surface characteristics, and meteorological drivers.In this study, we assess the impact of two newly developed high-resolution soil erodibility datasets on regional dust simulations using WRF-Chem with the GOCART scheme. The first dataset, EROD, improves dust source representation by integrating fine-resolution topography (GMTED2010), achieving 0.0625° (≈5 km) resolution globally and 1 km locally for the Iberian Peninsula. The second dataset, SOILHD, further refines dust source characterization by incorporating local-scale soil composition (sand, silt, clay fractions) and removing areas erroneously classified as bare soil, reaching 1 km resolution globally. These datasets aim to capture the spatial heterogeneity of dust sources, which is critical in semi-arid regions with sparse vegetation and variable soil properties.We conduct WRF-Chem simulations for five periods between 2022 and 2025, representing a range of dust episodes with local and long-range transport. Model performance is evaluated against PM10 measurements from the SINQLAIR network across coastal and inland stations in the Region of Murcia. Results indicate that the high-resolution datasets substantially improve the spatial and temporal representation of dust emissions. Inland and low-anthropogenic-influence stations show better agreement with observed PM10 peaks in both magnitude and timing compared to simulations using standard coarse-resolution erodibility fields. At coastal and industrially influenced sites, improvements are more limited due to missing anthropogenic emissions and additional aerosol components, but statistical metrics such as correlation, Mean Bias Error (MBE), and Root Mean Square Error (RMSE) still indicate significant enhancement.Overall, the results demonstrate that high-resolution, type–aware soil erodibility datasets significantly enhance the skill of dust simulations in WRF-Chem, reducing biases and capturing observed variability more accurately. These findings underscore the importance of detailed soil and topographic information for regional dust modeling and highlight the potential benefits of incorporating such datasets into operational dust forecasting systems.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Interactions between urban climate and air pollution in high-resolution WRF-Chem simulations over Madrid
Urban climate can be understood as a local perturbation of the surrounding regional climate, modifying the exchange of energy, moisture, and momentum between the surface and the atmosphere. In rural areas, these exchanges are largely controlled by vegetation and soil properties, whereas in cities they are strongly altered by artificial materials, urban morphology, and anthropogenic emissions. These modifications give rise to characteristic urban phenomena, such as the urban heat island, and strongly influence the dispersion, accumulation, and transformation of air pollutants. At the same time, atmospheric pollution can affect radiative processes and feedback on urban meteorology, forming a coupled, bidirectional, and potentially nonlinear system.In this work, the WRF-Chem model is used to investigate the interactions between urban climate and air quality over the metropolitan area of Madrid, Spain. A set of short-term simulations was performed using a one-way nested configuration, with a parent domain over the Iberian Peninsula at 5-km resolution and an inner domain over Madrid at 1-km resolution. Four main experiment families were considered: rural and urban configurations, each with and without atmospheric chemistry. Additional sensitivity experiments were conducted to assess the impact of emission strength and urban representation. Urban land cover was prescribed using the CGLC-MODIS-LCZ dataset, which provides detailed land-use information at 100-m resolution. For rural simulations, all urban categories were replaced by the dominant surrounding rural land-cover type. Anthropogenic emissions were taken from the CAMS inventory, and aerosol–radiation interactions were included, while aerosol–cloud interactions were neglected.The results show that air pollution exerts a small but discernible impact on near-surface temperature, whereas the choice of urban parameterization strongly affects the intensity and spatial structure of the urban heat island, particularly at night. Activating urban canopy models such as BEP and BEP+BEM increases simulated urban temperatures by up to 4–5 °C relative to rural configurations, in agreement with the observations, and modifies local circulation patterns. These circulation changes, in turn, affect surface pollutant concentrations, leading to increases of 20–25% in some urban areas. While the magnitude of pollutant concentrations varies with emission strength, the relative impact of urban-induced circulation on pollutant distribution remains similar.Overall, the results highlight the importance of accurately representing both urban morphology and emissions in coupled atmosphere–chemistry models to properly capture local climate and air-quality interactions in cities.Acknowledgements: The authors acknowledge the ARUBA project (PID2023-149080OB-I00/MCIN/AEI/10.13039/501100011033, Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain & FEDER, EU). ERL thanks her predoctoral contract FPU (FPU21/02464) to the Ministerio de Universidades of Spain.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessInteractions between urban climate and air pollution in high-resolution WRF-Chem simulations over Madrid
Urban climate can be understood as a local perturbation of the surrounding regional climate, modifying the exchange of energy, moisture, and momentum between the surface and the atmosphere. In rural areas, these exchanges are largely controlled by vegetation and soil properties, whereas in cities they are strongly altered by artificial materials, urban morphology, and anthropogenic emissions. These modifications give rise to characteristic urban phenomena, such as the urban heat island, and strongly influence the dispersion, accumulation, and transformation of air pollutants. At the same time, atmospheric pollution can affect radiative processes and feedback on urban meteorology, forming a coupled, bidirectional, and potentially nonlinear system.In this work, the WRF-Chem model is used to investigate the interactions between urban climate and air quality over the metropolitan area of Madrid, Spain. A set of short-term simulations was performed using a one-way nested configuration, with a parent domain over the Iberian Peninsula at 5-km resolution and an inner domain over Madrid at 1-km resolution. Four main experiment families were considered: rural and urban configurations, each with and without atmospheric chemistry. Additional sensitivity experiments were conducted to assess the impact of emission strength and urban representation. Urban land cover was prescribed using the CGLC-MODIS-LCZ dataset, which provides detailed land-use information at 100-m resolution. For rural simulations, all urban categories were replaced by the dominant surrounding rural land-cover type. Anthropogenic emissions were taken from the CAMS inventory, and aerosol–radiation interactions were included, while aerosol–cloud interactions were neglected.The results show that air pollution exerts a small but discernible impact on near-surface temperature, whereas the choice of urban parameterization strongly affects the intensity and spatial structure of the urban heat island, particularly at night. Activating urban canopy models such as BEP and BEP+BEM increases simulated urban temperatures by up to 4–5 °C relative to rural configurations, in agreement with the observations, and modifies local circulation patterns. These circulation changes, in turn, affect surface pollutant concentrations, leading to increases of 20–25% in some urban areas. While the magnitude of pollutant concentrations varies with emission strength, the relative impact of urban-induced circulation on pollutant distribution remains similar.Overall, the results highlight the importance of accurately representing both urban morphology and emissions in coupled atmosphere–chemistry models to properly capture local climate and air-quality interactions in cities.Acknowledgements: The authors acknowledge the ARUBA project (PID2023-149080OB-I00/MCIN/AEI/10.13039/501100011033, Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain & FEDER, EU). ERL thanks her predoctoral contract FPU (FPU21/02464) to the Ministerio de Universidades of Spain.