C. Wang
Research Subjects
C. Wang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Hongtao Fu
College of Civil Engineering and Architecture, Wenzhou University, Wenzhou, China
1 shared publication - Jun Wang
Wenzhou University
1 shared publication - Junfeng Ni
College of Civil Engineering and Architecture, Wenzhou University, Wenzhou, China
1 shared publication - Liangfu Xie
College of Civil Engineering and Architecture, Xinjiang University, Ürümqi, China
1 shared publication - Xueyu Geng
School of Engineering, University of Warwick, Coventry, UK
1 shared publication Z. Liu
Wenzhou Univ 3 College of Civil Engineering and Architecture, International Cooperation Base for Science and Technology on Ultra-soft Soil Engineering and Smart Monitoring, ., Wenzhou, P.R.
1 shared publication
Latest Publications
- 6 April 2026
- Published by Emerald Publishing in Geosynthetics International
- Vol. 33 (6) , 931-941
Reinforcement and microseismic monitoring of slopes with a self-sensing smart geosynthetic
Conventional geosynthetics have been extensively employed in slope reinforcement, yet they primarily offer mechanical stabilization without the capability to monitor internal damage within reinforced soil, thereby limiting post-seismic stability assessment. This study employed a sensor-enabled piezoelectric geobelt (SPGB) with dual monitoring and reinforcement functions as a geogrid for soil slope stabilization. By collecting SPGB voltage vibration signals through shake table tests, dynamic slip plane localization and slope stability assessment were achieved. Test results indicate that the peak ground acceleration (PGA) amplification factors at heights of 400 mm and 600 mm for reinforced slopes are significantly lower than those of unreinforced natural soil slopes. At 0.5 g, unreinforced slopes exhibited amplification factors 46.09% and 31.79% higher than those of reinforced slopes, respectively. These findings confirm that the SPGB reinforcement structure significantly suppresses acceleration amplification effects, enhancing the slope’s seismic performance. When SPGBs in high-risk zones experience unstable stress states due to soil disturbance, their voltage signal amplitudes increase dramatically, with both RMS voltage and real-time voltage exceeding 100 mV. This behavior demonstrates that SPGBs enable real-time monitoring of dynamic responses within slopes and serve as effective indicators for assessing soil stability.
- 6 April 2026
- Published by Emerald Publishing in Geosynthetics International
- Vol. 33 (6) , 931-941
Reinforcement and microseismic monitoring of slopes with a self-sensing smart geosynthetic
Conventional geosynthetics have been extensively employed in slope reinforcement, yet they primarily offer mechanical stabilization without the capability to monitor internal damage within reinforced soil, thereby limiting post-seismic stability assessment. This study employed a sensor-enabled piezoelectric geobelt (SPGB) with dual monitoring and reinforcement functions as a geogrid for soil slope stabilization. By collecting SPGB voltage vibration signals through shake table tests, dynamic slip plane localization and slope stability assessment were achieved. Test results indicate that the peak ground acceleration (PGA) amplification factors at heights of 400 mm and 600 mm for reinforced slopes are significantly lower than those of unreinforced natural soil slopes. At 0.5 g, unreinforced slopes exhibited amplification factors 46.09% and 31.79% higher than those of reinforced slopes, respectively. These findings confirm that the SPGB reinforcement structure significantly suppresses acceleration amplification effects, enhancing the slope’s seismic performance. When SPGBs in high-risk zones experience unstable stress states due to soil disturbance, their voltage signal amplitudes increase dramatically, with both RMS voltage and real-time voltage exceeding 100 mV. This behavior demonstrates that SPGBs enable real-time monitoring of dynamic responses within slopes and serve as effective indicators for assessing soil stability.