JDJessica de Dios-Suárez

Jessica de Dios-Suárez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jessica de Dios-Suárez has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Three-Dimensional Transient Thermal Analysis of BIPV Roof Systems with Passive Cooling Fins Under Real Climatic Conditions

    by Juan Pablo De-Dios-Jiménez, Germán Pérez-Hernández, Rafael Torres-Ricárdez, Reymundo Ramírez-Betancour, Jesús López-Gómez, Jessica De-Dios-Suárez, Brayan Leonardo Pérez-Escobar

    This paper describes the thermal and energy performance of three roof configurations: a conventional concrete slab, a BIPV system, and a BIPV system equipped with passive aluminum fins. Three-dimensional transient finite element simulations were carried out under field-measured 24 h meteorological boundary conditions characteristic of hot climates. The objective of this study is to quantify the impact of PV integration and passive cooling strategies on heat transfer behavior and building energy performance. The BIPV roof achieved a 38.4% lower residual temperature than the concrete slab at 19:00, indicating superior heat dissipation. The addition of passive fins reduced module temperature by up to 10–12 °C and decreased peak roof temperature by up to 12%. This temperature reduction decreased electrical losses from 13.2% to 10.4%, resulting in a 21% relative reduction in temperature-induced losses. The predicted temperature ranges (≈60–75 °C under peak conditions) are consistent with values reported in experimental and numerical studies of BIPV systems in hot climates, supporting the physical realism of the model. Convective heat transfer was represented using effective coefficients, providing a computationally efficient engineering approximation of air-side heat exchange. Despite construction cost increases of up to 38%, PV integration achieved competitive payback periods of approximately 8.5–9 months under hot climate conditions. This economic assessment is based on a simple payback approach using an incremental cost formulation, where the photovoltaic system replaces the conventional concrete roof, reducing the effective investment. This study introduces a reproducible 3D transient FEM methodology for evaluating BIPV roofs under field-measured climatic boundary conditions. The framework explicitly couples geometry-resolved passive cooling, full-day thermal evolution, and temperature-dependent electrical losses, providing a physically consistent basis for assessing BIPV design alternatives in hot climates.


  • Open Access

    Influence of Thermal Treatment and Particle Size on the Physicochemical Properties and Filler Performance of Oyster Shell-Derived CaCO3 in Mortar

    by Jessica de Dios-Suárez, Brayan Leonardo Pérez-Escobar, Germán Pérez-Hernández, Francisco Iván Lizama-Tzec, Laura Lorena Díaz-Flores, Salatiel Pérez-Montejo, Juan Pablo de Dios-Jiménez, Rafael Torres-Ricárdez

    The cement industry contributes approximately 7–8% of global CO2 emissions, motivating the development of sustainable supplementary materials. This study evaluates the partial replacement (10 wt.%) of Portland cement with calcium carbonate (CaCO3) derived from oyster shells, both untreated and thermally treated at 600 °C, in non-structural mortar blocks. Structural and physicochemical characterization was performed using XRD, SEM, EDS, BET, and TGA to assess phase composition, morphology, and surface properties. Thermal treatment modified the textural characteristics of CaCO3, reducing the crystallite size and increasing the specific surface area (from 5.8 to 25.6 m2/g), without phase transformation. Compressive strength results, relative to a reference mortar (13.6 MPa), showed comparable performance, with variations generally within ±10%, although slightly larger deviations were observed for specific particle sizes. Finer calcined particles yielded the highest strength (15.0 MPa), reinforcing the combined influence of particle size and thermal treatment. These results suggest that CaCO3 acts primarily through a filler effect, improving particle packing and matrix interaction. Both untreated and heat-treated CaCO3 satisfied strength requirements for non-structural applications, supporting the valorization of oyster shell waste as a sustainable material in cement-based systems.