Peter Watson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Peter Watson has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Marcello Lappa
University of Strathclyde
3 shared publications - Sebastien Vincent Bonnieu
European Space Agency European Space Research and Technology Center Noordwijk the Netherlands
3 shared publications Ali Anwar
Department of Mechanical and Aerospace Engineering University of Strathclyde Glasgow Scotland UK
1 shared publication- Craig McKenzie
Department of Mechanical and Aerospace Engineering, University of Strathclyde 1 , James Weir Building, 75 Montrose Street, Glasgow G1 1XJ
1 shared publication - Lewis Traquair
Department of Mechanical and Aerospace Engineering University of Strathclyde Glasgow Scotland UK
1 shared publication
Latest Publications
- Open Access
- 3 September 2026
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 50 (17) , 6124-6153
Computational Analysis of the Vibrational Response of Lunar Regolith Made of Nonspherical Grains
Vibration‐based systems have shown that appropriately oriented and tuned mechanical oscillations can disrupt regolith interlocking and promote flow. Building on this evidence, the present study investigates vibration‐controlled granular discharge as a potential ISRU (In Situ Resource Utilization) strategy, with the aim of supporting predictable material processing through physically consistent numerical modeling. The equations governing the dynamics of nonspherical particles are presented accordingly and used to simulate the behavior of a fixed mass of granular material flowing through a hopper device in the framework of the discrete element method (DEM). The results show that even for monodisperse distributions vibration‐induced fluidization does not follow simple monotonic trends. The mass flow rate initially increases with the forcing frequency f , reaching a plateau in the range of 150–200 Hz, beyond which further frequency increases produce no significant enhancement. At the same time, higher values of the dimensionless acceleration Γ generally reduce the mass flow rate and cause an increase in the frequency threshold above which vibration‐driven discharge exceeds gravity‐driven flow. Moreover, for fixed, moderately low values of Γ, increasing f leads to the emergence of higher‐order harmonics in the instantaneous mass flow rate. For fixed and relatively high values of f , a larger value of Γ can cause the appearance of subharmonics in the spectrum. In contrast, for relatively low f and high Γ, incommensurate spectral components appear, which reduce the regularity and predictability of the flow response. These findings are supported by a detailed analysis of particle patterning behavior and frequency spectra, which reveals the fine‐scale dynamics underlying the observed flow regimes.
- 3 September 2026
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 50 (17) , 6124-6153
Open AccessComputational Analysis of the Vibrational Response of Lunar Regolith Made of Nonspherical Grains
Vibration‐based systems have shown that appropriately oriented and tuned mechanical oscillations can disrupt regolith interlocking and promote flow. Building on this evidence, the present study investigates vibration‐controlled granular discharge as a potential ISRU (In Situ Resource Utilization) strategy, with the aim of supporting predictable material processing through physically consistent numerical modeling. The equations governing the dynamics of nonspherical particles are presented accordingly and used to simulate the behavior of a fixed mass of granular material flowing through a hopper device in the framework of the discrete element method (DEM). The results show that even for monodisperse distributions vibration‐induced fluidization does not follow simple monotonic trends. The mass flow rate initially increases with the forcing frequency f , reaching a plateau in the range of 150–200 Hz, beyond which further frequency increases produce no significant enhancement. At the same time, higher values of the dimensionless acceleration Γ generally reduce the mass flow rate and cause an increase in the frequency threshold above which vibration‐driven discharge exceeds gravity‐driven flow. Moreover, for fixed, moderately low values of Γ, increasing f leads to the emergence of higher‐order harmonics in the instantaneous mass flow rate. For fixed and relatively high values of f , a larger value of Γ can cause the appearance of subharmonics in the spectrum. In contrast, for relatively low f and high Γ, incommensurate spectral components appear, which reduce the regularity and predictability of the flow response. These findings are supported by a detailed analysis of particle patterning behavior and frequency spectra, which reveals the fine‐scale dynamics underlying the observed flow regimes.
- Open Access
- 21 April 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (3) , 533-556
The response of lunar regolith simulants of varying particle size ranges to vertical and horizontal vibrations
Granular fluidization is a method currently being investigated to mitigate the strong frictional and electrostatic interparticle forces that the material on the surface of the Moon, known as lunar regolith, exhibits. The reason for this ongoing line of inquiry is the eventual utilization of this material for numerous applications, e.g., feedstock for 3D-printed concrete structures or as a solid-support substrate for plant growth and/or oxygen and propellant extraction. It is known that when lunar regolith simulants are housed in a vessel vibrated at a given amplitude and frequency, the material can display fluidlike attributes and convective motion, which can be exploited for its excavation and/or transportation. In this study, three simulants were vibrated at different frequencies and amplitudes. Each simulant had a different particle size range (<0.04−250, <0.04–90, and <0.04–35 μm) and accordingly a different particle average size. It was discovered that when applying vertical vibrations, by increasing the average particle size, convective motion can be strengthened. In the case of horizontal vibrations, the opposite occurs, whereby the overall convective movement generally increases on reducing the average particle size. It was also observed that different (transverse, longitudinal, and “hybrid”) convective modes can be excited according to the considered frequency, strength, and direction of vibrations; moreover, for the simulant with the lowest average particle size, a specific frequency exists at which particle aggregation phenomena show up regardless of the direction of vibrations. In such conditions, particles form macroscopic clusters due to the excitation of electrostatic forces.
- 21 April 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (3) , 533-556
Open AccessThe response of lunar regolith simulants of varying particle size ranges to vertical and horizontal vibrations
Granular fluidization is a method currently being investigated to mitigate the strong frictional and electrostatic interparticle forces that the material on the surface of the Moon, known as lunar regolith, exhibits. The reason for this ongoing line of inquiry is the eventual utilization of this material for numerous applications, e.g., feedstock for 3D-printed concrete structures or as a solid-support substrate for plant growth and/or oxygen and propellant extraction. It is known that when lunar regolith simulants are housed in a vessel vibrated at a given amplitude and frequency, the material can display fluidlike attributes and convective motion, which can be exploited for its excavation and/or transportation. In this study, three simulants were vibrated at different frequencies and amplitudes. Each simulant had a different particle size range (<0.04−250, <0.04–90, and <0.04–35 μm) and accordingly a different particle average size. It was discovered that when applying vertical vibrations, by increasing the average particle size, convective motion can be strengthened. In the case of horizontal vibrations, the opposite occurs, whereby the overall convective movement generally increases on reducing the average particle size. It was also observed that different (transverse, longitudinal, and “hybrid”) convective modes can be excited according to the considered frequency, strength, and direction of vibrations; moreover, for the simulant with the lowest average particle size, a specific frequency exists at which particle aggregation phenomena show up regardless of the direction of vibrations. In such conditions, particles form macroscopic clusters due to the excitation of electrostatic forces.
- 21 April 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (3) , 557-579
Vibrationally aided flow of lunar regolith simulants in a hopper-based conveying device
Hoppers are expected to play an essential role in handling of lunar regolith for future lunar exploration missions from collection and storage to in situ resource utilization. This study presents a parametric experimental investigation of regolith discharge dynamics by using the LHS-1 simulant. Results show that vertical vibrations significantly affect the regularity of the flow of granular material through the orifice of the hopper, the average mass flow rate, the spatio-temporal patterning of the material displacement, and the occurrence of jamming (clogging) phenomena. While the average mass flow rate is consistently smaller than that obtained in purely gravitational flow, vibrations induce a significant reduction in the probability of arching and make the overall flow of material much more regular and spatially uniform. Four different flow configurations are identified accordingly in the entire space of parameters, i.e., “funnel,” “mass,” “asymmetric,” and “ratholing” flow. The “funnel” is the most common, while asymmetric and ratholing regimes are only attained for relatively high shaking frequency and amplitude. Low frequencies universally promote arching due to insufficient energy to disrupt force chains within the material. In contrast, the role of high frequencies is more complex, with clogging re-emerging at certain thresholds, particularly at low acceleration amplitude. Increasing the vibration amplitude generally mitigates blockage, but its effectiveness weakens with sample mass growth, indicating that additional factors, such as gravity-induced compaction and related particle rearrangement dynamics also play a significant role in governing such events.
- 21 April 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (3) , 557-579
Vibrationally aided flow of lunar regolith simulants in a hopper-based conveying device
Hoppers are expected to play an essential role in handling of lunar regolith for future lunar exploration missions from collection and storage to in situ resource utilization. This study presents a parametric experimental investigation of regolith discharge dynamics by using the LHS-1 simulant. Results show that vertical vibrations significantly affect the regularity of the flow of granular material through the orifice of the hopper, the average mass flow rate, the spatio-temporal patterning of the material displacement, and the occurrence of jamming (clogging) phenomena. While the average mass flow rate is consistently smaller than that obtained in purely gravitational flow, vibrations induce a significant reduction in the probability of arching and make the overall flow of material much more regular and spatially uniform. Four different flow configurations are identified accordingly in the entire space of parameters, i.e., “funnel,” “mass,” “asymmetric,” and “ratholing” flow. The “funnel” is the most common, while asymmetric and ratholing regimes are only attained for relatively high shaking frequency and amplitude. Low frequencies universally promote arching due to insufficient energy to disrupt force chains within the material. In contrast, the role of high frequencies is more complex, with clogging re-emerging at certain thresholds, particularly at low acceleration amplitude. Increasing the vibration amplitude generally mitigates blockage, but its effectiveness weakens with sample mass growth, indicating that additional factors, such as gravity-induced compaction and related particle rearrangement dynamics also play a significant role in governing such events.