Md. Mesbah Uddin Saadi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Md. Mesbah Uddin Saadi has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Md. Kawsarul Islam
Department of Mechanical Engineering, Dhaka University of Engineering & Technology, Gazipur 1707, Bangladesh
2 shared publications - Md. Mamun
Graduate School of Engineering, Osaka Sangyo University, Osaka 574-8530, Japan
2 shared publications Md. Omer Faruk
Department of Mechanical Engineering, Dhaka University of Engineering and Technology (DUET), Gazipur, Bangladesh
2 shared publications- Miah Md Ashraful Alam
Department of Systems Engineering, Osaka Sangyo University, Osaka 574-8530, Japan
2 shared publications Himangshu Bhowmik
Department of Mechanical Engineering, Dhaka University of Engineering and Technology (DUET), Gazipur, Bangladesh
1 shared publicationMahfuzul Islam
Department of Mechanical Engineering, Dhaka University of Engineering & Technology, Gazipur, Bangladesh
1 shared publication
Latest Publications
- Open Access
- 26 August 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (39) , 43069-43087
Beyond the lithium-ion trilemma: a six-dimension integrated battery sustainability framework
BSF scores LFP highest (0.645) across six dimensions (energy, cost, safety, recyclability, lifecycle, social). Recycling gap: 55% currently vs. 85% potential; scaling direct recycling is key.
- 26 August 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (39) , 43069-43087
Open AccessBeyond the lithium-ion trilemma: a six-dimension integrated battery sustainability framework
BSF scores LFP highest (0.645) across six dimensions (energy, cost, safety, recyclability, lifecycle, social). Recycling gap: 55% currently vs. 85% potential; scaling direct recycling is key.
- Open Access
Rarefied Intake Flow in an Atmospheric-Breathing VLEO Hall Thruster
Atmosphere-breathing Hall thrusters (ABHTs) have emerged as a promising propulsion technology for very low Earth orbit (VLEO) satellites because they can utilize residual atmospheric particles as propellant, reducing the need for onboard propellant storage. In this paper, the feasibility of an ABHT system was investigated through a combined experimental and numerical approach. Experimental tests using the THT-VI Hall thruster demonstrated stable operation with air propellant and achieved specific impulses up to 2847 s under high-voltage conditions, indicating the potential for atmospheric drag compensation. To evaluate the intake performance, Direct Simulation Monte Carlo (DSMC) simulations were conducted at an altitude of 180 km to examine the effects of intake geometry, including the duct aspect ratio and intake-to-thruster area ratio. The results showed that the intake system can generate discharge chamber pressures of approximately 10−3–10−1 Pa, which is sufficient for Hall thruster operation, but the maximum collected mass flow rate (0.298 mg/s) remained below the required 1.5 mg/s. Several modified intake configurations improved particle transport and reduced aerodynamic drag with the best design increasing mass flow rate by approximately 7.5 times compared with the baseline configuration. These findings indicate that the primary limitation of ABHT systems is the intake mass transport capability rather than the thruster performance itself. A further optimization of intake geometry and spacecraft integration is required to enable sustained VLEO operation.
Open AccessRarefied Intake Flow in an Atmospheric-Breathing VLEO Hall Thruster
Atmosphere-breathing Hall thrusters (ABHTs) have emerged as a promising propulsion technology for very low Earth orbit (VLEO) satellites because they can utilize residual atmospheric particles as propellant, reducing the need for onboard propellant storage. In this paper, the feasibility of an ABHT system was investigated through a combined experimental and numerical approach. Experimental tests using the THT-VI Hall thruster demonstrated stable operation with air propellant and achieved specific impulses up to 2847 s under high-voltage conditions, indicating the potential for atmospheric drag compensation. To evaluate the intake performance, Direct Simulation Monte Carlo (DSMC) simulations were conducted at an altitude of 180 km to examine the effects of intake geometry, including the duct aspect ratio and intake-to-thruster area ratio. The results showed that the intake system can generate discharge chamber pressures of approximately 10−3–10−1 Pa, which is sufficient for Hall thruster operation, but the maximum collected mass flow rate (0.298 mg/s) remained below the required 1.5 mg/s. Several modified intake configurations improved particle transport and reduced aerodynamic drag with the best design increasing mass flow rate by approximately 7.5 times compared with the baseline configuration. These findings indicate that the primary limitation of ABHT systems is the intake mass transport capability rather than the thruster performance itself. A further optimization of intake geometry and spacecraft integration is required to enable sustained VLEO operation.
- Open Access
- 20 June 2026
- Published by Elsevier in Next Nanotechnology
- Vol. 10
Toward sustainable tribological systems: Copper nanoparticle-enhanced vegetable oil nanolubricants
- 20 June 2026
- Published by Elsevier in Next Nanotechnology
- Vol. 10
Open AccessToward sustainable tribological systems: Copper nanoparticle-enhanced vegetable oil nanolubricants
- Open Access
- 18 June 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (12) , 6190
Mixing Characteristics of Supersonic Jets Injected into a Pressurized Gas Environment
The transition toward carbon-neutral energy systems has accelerated interest in hydrogen-fueled combustion technologies, where efficient fuel–air mixing is essential for stable and clean combustion. In the present study, the mixing characteristics of under-expanded supersonic jets injected into a pressurized environment are numerically investigated using validated computational fluid dynamics simulations. Two nozzle configurations are examined: a straight nozzle and sudden-expansion nozzles with different expansion ratios and expansion locations. The governing compressible flow equations are solved using the rhoCentralFoam solver with the SST k–ω turbulence model. The numerical framework is validated against Sod’s shock tube solution and experimental data for under-expanded supersonic free jets. The results show that sudden-expansion nozzles significantly modify the shock-wave structure, jet penetration, and lateral spreading compared with the straight nozzle. Among the investigated configurations, nozzles with intermediate expansion-section lengths exhibited pronounced Mach-disk oscillations with a dominant frequency of approximately 10 kHz. The normalized supersonic core length decreased from 17.79 for the straight nozzle to 5.50 for the best-performing sudden-expansion configuration, while the normalized jet half-width increased from 0.82 to 1.70, indicating substantially enhanced mixing performance. The findings demonstrate that nozzle geometry strongly governs the trade-off between flow stability and mixing enhancement in high-pressure supersonic jets.
- 18 June 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (12) , 6190
Open AccessMixing Characteristics of Supersonic Jets Injected into a Pressurized Gas Environment
The transition toward carbon-neutral energy systems has accelerated interest in hydrogen-fueled combustion technologies, where efficient fuel–air mixing is essential for stable and clean combustion. In the present study, the mixing characteristics of under-expanded supersonic jets injected into a pressurized environment are numerically investigated using validated computational fluid dynamics simulations. Two nozzle configurations are examined: a straight nozzle and sudden-expansion nozzles with different expansion ratios and expansion locations. The governing compressible flow equations are solved using the rhoCentralFoam solver with the SST k–ω turbulence model. The numerical framework is validated against Sod’s shock tube solution and experimental data for under-expanded supersonic free jets. The results show that sudden-expansion nozzles significantly modify the shock-wave structure, jet penetration, and lateral spreading compared with the straight nozzle. Among the investigated configurations, nozzles with intermediate expansion-section lengths exhibited pronounced Mach-disk oscillations with a dominant frequency of approximately 10 kHz. The normalized supersonic core length decreased from 17.79 for the straight nozzle to 5.50 for the best-performing sudden-expansion configuration, while the normalized jet half-width increased from 0.82 to 1.70, indicating substantially enhanced mixing performance. The findings demonstrate that nozzle geometry strongly governs the trade-off between flow stability and mixing enhancement in high-pressure supersonic jets.
- Open Access
- 1 May 2026
- Published by Elsevier in Next Materials
- Vol. 12
Sol-gel spin-coated W-doped VO₂ thin films on soda-lime glass: Structural and room-temperature optical properties
- 1 May 2026
- Published by Elsevier in Next Materials
- Vol. 12
Open AccessSol-gel spin-coated W-doped VO₂ thin films on soda-lime glass: Structural and room-temperature optical properties
- Open Access
- 11 November 2025
- Published by SciEnPG in SciEn Conference Series: Engineering
- Vol. 3, 485-492
Renewable Energy in Bangladesh: Challenges, Sustainable Power Generation, and Future Prospects
This review examines the potential of renewable energy sources to meet Bangladesh's expanding energy needs and critically examines their role in the country's power industry. The study highlights the critical contributions of solar, wind, hydro, biomass, biogas, geothermal, and nuclear resources, each of which uniquely reduces dependence on fossil fuels. Visual aids, including charts and maps, illustrate the distribution and capacity of renewable energy, highlighting the urgent need for integration to meet future demand. The review also analyses financial requirements, cost-effectiveness, and potential for reduction of greenhouse gas emissions. Critical barriers to rural electrification include land availability, funding constraints, and weak network infrastructure. The study argues that technological advancements, green finance, and policy reforms are crucial to overcoming these challenges. Proposed solutions include infrastructure modernization, international cooperation, and adopting climate-resilient technologies. Hydropower and solar energy are the most promising energy sources, contributing significantly to the current energy balance. The findings demonstrate a cooperative strategy for utilizing Bangladesh's renewable energy resources for a robust and sustainable energy transition.
- 11 November 2025
- Published by SciEnPG in SciEn Conference Series: Engineering
- Vol. 3, 485-492
Open AccessRenewable Energy in Bangladesh: Challenges, Sustainable Power Generation, and Future Prospects
This review examines the potential of renewable energy sources to meet Bangladesh's expanding energy needs and critically examines their role in the country's power industry. The study highlights the critical contributions of solar, wind, hydro, biomass, biogas, geothermal, and nuclear resources, each of which uniquely reduces dependence on fossil fuels. Visual aids, including charts and maps, illustrate the distribution and capacity of renewable energy, highlighting the urgent need for integration to meet future demand. The review also analyses financial requirements, cost-effectiveness, and potential for reduction of greenhouse gas emissions. Critical barriers to rural electrification include land availability, funding constraints, and weak network infrastructure. The study argues that technological advancements, green finance, and policy reforms are crucial to overcoming these challenges. Proposed solutions include infrastructure modernization, international cooperation, and adopting climate-resilient technologies. Hydropower and solar energy are the most promising energy sources, contributing significantly to the current energy balance. The findings demonstrate a cooperative strategy for utilizing Bangladesh's renewable energy resources for a robust and sustainable energy transition.