Lassi Lahtiluoma
Research Subjects
Lassi Lahtiluoma has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
Hele Savin
1 shared publication- Olli Eemeli Setälä
Department of Electronics and Nanoengineering, Aalto University, Espoo, Finland
1 shared publication - Ville Vähänissi
Aalto University
1 shared publication
Latest Publications
- Open Access
- 8 May 2026
- Published by Elsevier in SSRN Electronic Journal
Reducing Al/p-Si contact resistivity by utilizing Al2O3 induced surface accumulation
Here we study how much our previously proposed dopant free ohmic contacts, called induced contacts, are able to reduce the contact resistivity of a p-type ohmic contact. The induced contacts do not utilize any external doping but only a highly charged atomic layer deposited (ALD) Al2O3 thin film. The negative charge in the Al2O3 induces a p+ accumulation layer to the substrate surface, increasing the surface carrier concentration and lowering the contact resistivity. The results show that the Al2O3 induced contacts significantly decrease the contact resistivity of Al/p-Si contacts, and the narrower the contact the more pronounced the decrease is. The narrowest contacts studied here have a width of 3 μm, and the Al2O3 improves the contact resistivity from a reference value of 11.13 mΩ⋅cm2 to 0.90 mΩ⋅cm2 on a planar surface. An even larger improvement is observed with surface nanostructured samples, for which the contact resistivity reduced from 10.03 mΩ⋅cm2 to 0.73 mΩ⋅cm2. An analytical model is derived to help understand how dimensions affect the contact resistivity and to predict the contact resistivities at given dimensions. The model suggests theoretically lowest contact resistivity values of 1.0 µΩ⋅cm2 and 0.1 µΩ⋅cm2 for planar and nanostructured induced contacts, respectively.
- 8 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessReducing Al/p-Si contact resistivity by utilizing Al2O3 induced surface accumulation
Here we study how much our previously proposed dopant free ohmic contacts, called induced contacts, are able to reduce the contact resistivity of a p-type ohmic contact. The induced contacts do not utilize any external doping but only a highly charged atomic layer deposited (ALD) Al2O3 thin film. The negative charge in the Al2O3 induces a p+ accumulation layer to the substrate surface, increasing the surface carrier concentration and lowering the contact resistivity. The results show that the Al2O3 induced contacts significantly decrease the contact resistivity of Al/p-Si contacts, and the narrower the contact the more pronounced the decrease is. The narrowest contacts studied here have a width of 3 μm, and the Al2O3 improves the contact resistivity from a reference value of 11.13 mΩ⋅cm2 to 0.90 mΩ⋅cm2 on a planar surface. An even larger improvement is observed with surface nanostructured samples, for which the contact resistivity reduced from 10.03 mΩ⋅cm2 to 0.73 mΩ⋅cm2. An analytical model is derived to help understand how dimensions affect the contact resistivity and to predict the contact resistivities at given dimensions. The model suggests theoretically lowest contact resistivity values of 1.0 µΩ⋅cm2 and 0.1 µΩ⋅cm2 for planar and nanostructured induced contacts, respectively.