NSNazerke Serikkyzy

Nazerke Serikkyzy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nazerke Serikkyzy has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimization of Hydrogenation, Milling, and Dehydrogenation Parameters During HDH Processing of Sponge Titanium

    by Nazerke Serikkyzy, Zarina Aringozhina, Bauyrzhan Rakhadilov, Malgorzata Rutkowska-Gorczyca, Meruyert Adilkanova, Nurtoleu Magazov

    The influence of hydrogenation, mechanical milling, and dehydrogenation parameters on the structure and properties of titanium powders produced from titanium sponge via the hydride–dehydride (HDH) process was investigated. The aim of the study was to compare representative HDH processing routes and identify the processing route that provided the most favorable structural characteristics for subsequent mechanical alloying and powder metallurgy applications. Commercially pure Grade 0 titanium sponge was used as the starting material and was subjected to hydrogenation at temperatures ranging from 350 to 650 °C, short-duration mechanical milling in an argon atmosphere, and vacuum dehydrogenation at temperatures between 750 and 950 °C. The resulting powders were characterized using laser particle size analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). The results showed that increasing the hydrogenation temperature promoted the formation of the TiH2 hydride phase and enhanced powder fragmentation during subsequent mechanical milling. XRD analysis demonstrated effective dehydrogenation, as evidenced by the disappearance of detectable TiH2 reflections and the restoration of the α-titanium phase within the detection limits of the technique. Qualitative SEM observations indicated that the investigated HDH processing routes influenced particle morphology and agglomeration behavior, whereas EDS analysis demonstrated a relatively uniform distribution of the detected elements without revealing detectable contamination within the analyzed regions. Mechanical alloying of the selected powders with aluminum and vanadium showed that, among the investigated processing routes, the H2–M2–D2 condition provided the most favorable combination of particle size distribution, phase composition, morphology, and elemental distribution for the production of a mechanically alloyed Ti–Al–V powder mixture.

  • Open Access

    Production of Pre-Alloyed Ti–6Al–4V Powders from Titanium Sponge via a Combined Mechanical Alloying and Hydrogenation–Dehydrogenation Process for Powder Metallurgy

    by Nazerke Serikkyzy, Zarina Aringozhina, Bauyrzhan Rakhadilov, Meruyert Adilkanova, Nurtoleu Magazov, Arnur Askhatov

    Ti–6Al–4V is the primary titanium alloy for aerospace, biomedical, and additive manufacturing applications; however, the high cost of powders produced by atomization limits their widespread adoption. This study aims to develop a cost-effective method for producing chemically homogeneous pre-alloyed Ti–6Al–4V powders from titanium sponge. A combined process is proposed, involving the hydrogenation of titanium sponge, mechanical alloying of the hydride phase with Al and V powders, and subsequent vacuum dehydrogenation. The formation of the brittle δ-TiH2 phase facilitated intensive material comminution and effective distribution of the alloying elements. According to laser diffraction data, the median particle size decreased from 450 to 30–35 µm. X-ray diffraction (XRD) analysis confirmed the sequential α-Ti → δ-TiH2 transition and the formation of a stable α + β two-phase structure characteristic of Ti–6Al–4V following dehydrogenation. SEM observations demonstrated that the final powders predominantly consist of individual fractured particles with limited hard agglomeration, favorable for powder flowability and compaction behavior. EDS analysis indicated a relatively homogeneous microscale distribution of Al and V without observable large-scale segregation. The synthesized powders exhibited low impurity levels, with O < 0.07 wt.% and H < 0.02 wt.%. The developed approach represents a promising and economical alternative to expensive atomization techniques for powder metallurgy and additive manufacturing.