ARAjith Raj Rajendran

Ajith Raj Rajendran

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ajith Raj Rajendran has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Experimental study of blast wave attenuation using perforated plates and sandwich structures

    by Aldin Justin Sundararaj, Kesavan Marimuthu, Subramanyam Venkatachalam, Anton Savio Lewise Kuzhanthai, Rakhi Aldin, Ajith Raj Rajendran, Levi Reuben Victor Ramasamy, Sneha Gautam

    Blast waves in confined environments generate severe overpressures due to repeated wave reflections, posing significant threats to structures and personnel. Therefore, effective mitigation strategies require experimental evaluation under controlled conditions. In the present study, blast wave attenuation using perforated plates, and hybrid sandwich configurations is investigated experimentally using a shock tube facility. Shock waves with velocities between 500 and 650 m/s were generated using driver pressure ranging from 3 to 12 bar and characterized using high-frequency pressure transducers. Circular and triangular plates with perforation ratios (PR) of 30-50% were examined to assess the influence of perforation geometry and blockage ratio on pressure and velocity attenuation. Results show that blast attenuation increases with blockage ratio and is strongly dependent on perforation shape. Circular perforated plates achieved maximum pressure reduction of approximately 59% at 30% perforation ratio, while triangular perforations resulted in a maximum attenuation of 70% at a perforation ratio of 40%. Among the materials tested, polyurethane foam exhibited the highest attenuation, achieving pressure reductions up to 62% due to its superior energy absorption. Hybrid sandwich configurations combining perforated plates with polyurethane foam further improved blast mitigation, achieving pressure reductions up to 70% along with substantial reductions in transmitted shock velocity.

  • Open Access

    Improvement of wear resistance and microhardness of SS304 by coating 8-YSZ for aerospace applications

    by Janardhan Kamath, S. Venkatachalam, Ajith Raj Rajendran

    The advancements in materials and surface modification methods have gained significant attention in various industrial applications. In this study, we investigate the efficacy of ceramic-coated SS304 by depositing a coating consisting of 8 % Yttria Stabilized Zirconia (YSZ). This paper explores the application of ceramic coatings, particularly 8-YSZ, onto SS304 substrates at thicknesses of 50 microns and 100 microns. Microhardness tests reveal a direct correlation between coating thickness and hardness numbers, with the coated substrate exhibiting a higher hardness, up to 1.6 times greater than the uncoated substrate. The coating process significantly enhances mechanical strength, surpassing the uncoated substrate. Wear analysis shows that as the coating thickness increases, the wear rate decreases by up to 40 % compared to the substrate material, indicating the effectiveness of thicker coatings in mitigating wear and enhancing substrate durability. Microstructure tests before and after wear provide insights into structural changes induced by wear phenomena, elucidating the evolution of microstructural features under abrasive conditions. The findings highlight the critical role of engineering materials, particularly zirconia-based ceramic (8-YSZ), in improving the mechanical properties and wear resistance of substrates through coating applications.