Gustavo Ronceros
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gustavo Ronceros has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Julio Ronceros
R&D Laboratory in Emerging Technologies, Universidad Peruana de Ciencias Aplicadas, Lima 15023, Peru
4 shared publications - Carlos Raymundo
Universidad Peruana de Ciencias Aplicadas
3 shared publications - Leonardo Vinces
Universidad Peruana de Ciencias Aplicadas
3 shared publications - Diego Rivera
Universidad Peruana de Ciencias Aplicadas
2 shared publications - Eduardo Ayala
Universidad Peruana de Ciencias Aplicadas
2 shared publications - Gianpierre Zapata
Universidad Peruana de Ciencias Aplicadas
2 shared publications
Latest Publications
- Open Access
- 31 December 2024
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 17 (6) , 57-68
Study of Internal Flow with Deceleration in a Cryogenic Chamber Composed of Jet-Type Atomizers
The present article delves into the comprehensive study of internal flow dynamics within a cryogenic chamber used for freezing food with high water percent. For cryogenic freezing is necessary to reduce temperature extremely and maintain a uniform distribution, different behaviours may cause structural damages on food. This is because the chamber comprises a circular-sectioned tunnel or chamber coupled with a set of Jet-type atomizers for the injection of liquid nitrogen. The internal flow, predominantly consisting of liquid nitrogen, necessitates prolonged residency within the chamber to uniformly and effectively cool or freeze food traversing its interior. Consequently, the primary aim is to extend the cryogenic fluid's residence time, achieved by strategically decelerating the flow. This deceleration is orchestrated through the strategic injection of the fluid to induce a swirling or vortex effect. The formation of this effect is meticulously executed by positioning the atomizers at periodic intervals around the internal walls of the cylindrical chamber, ensuring a prolonged recirculation of the internal flow. This research endeavour is further augmented by a comprehensive numerical analysis of swirling flow dynamics and associated parameters such as temperature, velocity, pressure and nitrogen-liquid interface. Leveraging the robust capabilities of CFD ANSYS software (Computational Fluid Dynamics), this analysis incorporates sophisticated models including the Volume of Fluid (VOF) model and the k-epsilon turbulence model. Additionally, the construction of a three-dimensional hexahedral mesh, facilitated by ICEM CFD software, adds depth and precision to the numerical simulations. The culmination of this study lies in the profound comprehension of internal flow behaviour and its intrinsic correlation with the design intricacies of the cryogenic system. Variations in nitrogen injection pressures and the strategic deployment of atomizers around the chamber serve as pivotal parameters for elucidating the system's optimal design
- 31 December 2024
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 17 (6) , 57-68
Open AccessStudy of Internal Flow with Deceleration in a Cryogenic Chamber Composed of Jet-Type Atomizers
The present article delves into the comprehensive study of internal flow dynamics within a cryogenic chamber used for freezing food with high water percent. For cryogenic freezing is necessary to reduce temperature extremely and maintain a uniform distribution, different behaviours may cause structural damages on food. This is because the chamber comprises a circular-sectioned tunnel or chamber coupled with a set of Jet-type atomizers for the injection of liquid nitrogen. The internal flow, predominantly consisting of liquid nitrogen, necessitates prolonged residency within the chamber to uniformly and effectively cool or freeze food traversing its interior. Consequently, the primary aim is to extend the cryogenic fluid's residence time, achieved by strategically decelerating the flow. This deceleration is orchestrated through the strategic injection of the fluid to induce a swirling or vortex effect. The formation of this effect is meticulously executed by positioning the atomizers at periodic intervals around the internal walls of the cylindrical chamber, ensuring a prolonged recirculation of the internal flow. This research endeavour is further augmented by a comprehensive numerical analysis of swirling flow dynamics and associated parameters such as temperature, velocity, pressure and nitrogen-liquid interface. Leveraging the robust capabilities of CFD ANSYS software (Computational Fluid Dynamics), this analysis incorporates sophisticated models including the Volume of Fluid (VOF) model and the k-epsilon turbulence model. Additionally, the construction of a three-dimensional hexahedral mesh, facilitated by ICEM CFD software, adds depth and precision to the numerical simulations. The culmination of this study lies in the profound comprehension of internal flow behaviour and its intrinsic correlation with the design intricacies of the cryogenic system. Variations in nitrogen injection pressures and the strategic deployment of atomizers around the chamber serve as pivotal parameters for elucidating the system's optimal design
- Open Access
- 9 July 2024
- Published by MDPI AG in Technologies
- Vol. 12 (7) , 107
Numerical Simulation and Design of a Mechanical Structure of an Ankle Exoskeleton for Elderly People
This article presents the numerical simulation and design of an ankle exoskeleton oriented to elderly users. For the design, anatomical measurements were taken from a user of this age group to obtain an ergonomic, resistant, and exceptionally reliable mechanical structure. In addition, the design was validated to support a “weight range” of users between 50 and 80 kg in order to evaluate the reaction of the mechanism within the range of loads generated in relation to the first principal stress, the safety coefficient, the Von Mises stress, and principal deformations, for which the 3D CAD software Autodesk Inventor and theoretical correlations were used to calculate the displacement and rotation angles of the ankle in the structure. Likewise, two types of materials were evaluated: ABS (acrylonitrile butadiene styrene) and a polymer reinforced with carbon fiber. Finally, the designed pieces were assembled with the guarantee that the mobility of the system had been validated through the numerical simulation environment, highlighting that by being generated through 3D printing, manufacturing costs are reduced, allowing them to be accessible and ensuring that more people can benefit from this ankle exoskeleton.
- 9 July 2024
- Published by MDPI AG in Technologies
- Vol. 12 (7) , 107
Open AccessNumerical Simulation and Design of a Mechanical Structure of an Ankle Exoskeleton for Elderly People
This article presents the numerical simulation and design of an ankle exoskeleton oriented to elderly users. For the design, anatomical measurements were taken from a user of this age group to obtain an ergonomic, resistant, and exceptionally reliable mechanical structure. In addition, the design was validated to support a “weight range” of users between 50 and 80 kg in order to evaluate the reaction of the mechanism within the range of loads generated in relation to the first principal stress, the safety coefficient, the Von Mises stress, and principal deformations, for which the 3D CAD software Autodesk Inventor and theoretical correlations were used to calculate the displacement and rotation angles of the ankle in the structure. Likewise, two types of materials were evaluated: ABS (acrylonitrile butadiene styrene) and a polymer reinforced with carbon fiber. Finally, the designed pieces were assembled with the guarantee that the mobility of the system had been validated through the numerical simulation environment, highlighting that by being generated through 3D printing, manufacturing costs are reduced, allowing them to be accessible and ensuring that more people can benefit from this ankle exoskeleton.
- Open Access
Study of Internal Flow in Open-End and Closed Pressure-Swirl Atomizers with Variation of Geometrical Parameters
This study delves into the examination of internal flow characteristics within closed (with nozzles) and open-end pressure-swirl atomizers (lacking nozzles). The number of inlet channels “n” and the opening parameter “C” were manipulated in this study, as they play a pivotal role in understanding various atomizer attributes, such as uniformity of the air-core diameter, the discharge coefficient, spray angle, and more, all of which hold significance in the design of bipropellant atomizers for liquid rocket engines (LREs). To validate our findings, six distinct hexahedral meshes were generated using Ansys ICEM software 2023. Subsequently, we employed Ansys Fluent, considering the RNG k-ε turbulence model and the VOF (volume-of-fluid) multiphase model to identify the liquid–gas interface, to aid in analyzing the uniformity of the air core, which is directly linked to the even distribution of mass, the mixing ratio of propellants, combustion efficiency, and stability. The results indicate that the uniformity of the air core is not solely contingent on an increase in parameter “n” but is also influenced by an increase in the parameter “C”. It is worth noting that the key dimensions of these six atomizers were determined using a mathematical model based on Abramovich and Kliachko theories.
Open AccessStudy of Internal Flow in Open-End and Closed Pressure-Swirl Atomizers with Variation of Geometrical Parameters
This study delves into the examination of internal flow characteristics within closed (with nozzles) and open-end pressure-swirl atomizers (lacking nozzles). The number of inlet channels “n” and the opening parameter “C” were manipulated in this study, as they play a pivotal role in understanding various atomizer attributes, such as uniformity of the air-core diameter, the discharge coefficient, spray angle, and more, all of which hold significance in the design of bipropellant atomizers for liquid rocket engines (LREs). To validate our findings, six distinct hexahedral meshes were generated using Ansys ICEM software 2023. Subsequently, we employed Ansys Fluent, considering the RNG k-ε turbulence model and the VOF (volume-of-fluid) multiphase model to identify the liquid–gas interface, to aid in analyzing the uniformity of the air core, which is directly linked to the even distribution of mass, the mixing ratio of propellants, combustion efficiency, and stability. The results indicate that the uniformity of the air core is not solely contingent on an increase in parameter “n” but is also influenced by an increase in the parameter “C”. It is worth noting that the key dimensions of these six atomizers were determined using a mathematical model based on Abramovich and Kliachko theories.
- Open Access
Design of a Cryogenic Duplex Pressure-Swirl Atomizer through CFDs for the Cold Conservation of Marine Products
The following article proposes the design of a bi-centrifugal atomizer that allows the interaction of sprays from two fluids (water and liquid nitrogen). The liquid nitrogen (LN2) is below −195.8 °C, a temperature low enough for the nitrogen, upon contact with the atomized water, to cause heat loss and bring it to its freezing point. The objective is to convert the water droplets present in the spray into ice. Upon falling, the ice particles can be dispersed, covering the largest possible area of the seafood products intended for cold preservation. All these phenomena related to the interaction of two fluids and heat exchange are due to the bi-centrifugal atomizer, which positions the two centrifugal atomizers concentrically, resulting in the inevitable collision of the two sprays. Each of these atomizers will be designed using a mathematical model and CFDs tools. The latter will provide a better study of the flow behavior of both fluids inside and outside the bi-centrifugal atomizer. Hence, the objective revolves around confirming the validity of the mathematical model through a comparison with numerical simulation data. This comparison establishes a strong correlation (with a maximum variance of 1.94% for the water atomizer and 10% for the LN2 atomizer), thereby ensuring precise manufacturing specifications for the atomizers. It is important to highlight that, in order to achieve the enhanced resolution and comprehension of the fluid both inside and outside the duplex atomizer, two types of meshes were utilized, ensuring the utilization of the optimal option. Similarly, the aforementioned meshes were generated using two distinct software platforms, namely ANSYS Meshing (tetrahedral mesh) and ANSYS ICEM (hexahedral mesh), to facilitate a comparative analysis of the mesh quality obtained. This comprehension facilitated the observation of water temperature during its interaction with liquid nitrogen, ultimately ensuring the freezing of water droplets at the atomizer’s outlet. This objective aligns seamlessly with the primary goal of this study, which revolves around the preservation of seafood products through cold techniques. This particular attribute holds potential for various applications, including cooling processes for food products.
Open AccessDesign of a Cryogenic Duplex Pressure-Swirl Atomizer through CFDs for the Cold Conservation of Marine Products
The following article proposes the design of a bi-centrifugal atomizer that allows the interaction of sprays from two fluids (water and liquid nitrogen). The liquid nitrogen (LN2) is below −195.8 °C, a temperature low enough for the nitrogen, upon contact with the atomized water, to cause heat loss and bring it to its freezing point. The objective is to convert the water droplets present in the spray into ice. Upon falling, the ice particles can be dispersed, covering the largest possible area of the seafood products intended for cold preservation. All these phenomena related to the interaction of two fluids and heat exchange are due to the bi-centrifugal atomizer, which positions the two centrifugal atomizers concentrically, resulting in the inevitable collision of the two sprays. Each of these atomizers will be designed using a mathematical model and CFDs tools. The latter will provide a better study of the flow behavior of both fluids inside and outside the bi-centrifugal atomizer. Hence, the objective revolves around confirming the validity of the mathematical model through a comparison with numerical simulation data. This comparison establishes a strong correlation (with a maximum variance of 1.94% for the water atomizer and 10% for the LN2 atomizer), thereby ensuring precise manufacturing specifications for the atomizers. It is important to highlight that, in order to achieve the enhanced resolution and comprehension of the fluid both inside and outside the duplex atomizer, two types of meshes were utilized, ensuring the utilization of the optimal option. Similarly, the aforementioned meshes were generated using two distinct software platforms, namely ANSYS Meshing (tetrahedral mesh) and ANSYS ICEM (hexahedral mesh), to facilitate a comparative analysis of the mesh quality obtained. This comprehension facilitated the observation of water temperature during its interaction with liquid nitrogen, ultimately ensuring the freezing of water droplets at the atomizer’s outlet. This objective aligns seamlessly with the primary goal of this study, which revolves around the preservation of seafood products through cold techniques. This particular attribute holds potential for various applications, including cooling processes for food products.