AMAidarkhan Mukhtar

Aidarkhan Mukhtar

*This is an algorithmically generated author record based on publicly available information.

Aidarkhan Mukhtar has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Recovery of Manganese from Manganese Ore Processing Tailings by High-Intensity Magnetic Separation

    by Aidarkhan Mukhtar, Gulnara Katkeeva, Ardak Makashev, Muratkhan Atakhan, Serik Gabdullin, Alexey Orlov, Bayan Kassymova, Zhaslan Dyusekeyev, Alexander Kurkin, Serik Nazymbekov

    The increasing volumes of mining and mineral processing tailings and the declining quality of natural manganese ores have intensified interest in the recovery of valuable components from previously accumulated processing wastes. In this study, the efficiency of dry high-intensity magnetic separation for manganese concentration from manganese ore processing tailings generated during the processing of manganese ores in the Ulytau Region of the Republic of Kazakhstan was investigated. According to chemical analysis, the initial sample contained 9.81% Mn, 3.01% Fe, and 60.57% SiO2. A representative sample was characterized using X-ray diffraction (XRD), scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS), and atomic absorption spectrometry (AAS). Dry magnetic separation tests were performed using a PC-B 12/10-12.018–2012 belt magnetic separator at magnetic field intensities ranging from 0.33 to 0.90 T. It was established that manganese in the initial material was predominantly associated with weakly magnetic minerals, which accounts for the effectiveness of high-intensity magnetic separation. As a result, a magnetic concentrate was obtained with a yield of 27.60%, a Mn content of 25.89%, and a Mn recovery of 72.84%. According to the chemical analysis, the manganese content increased from 9.81% in the initial material to 25.89% in the magnetic product, corresponding to an enrichment ratio of approximately 2.64. At the same time, the SiO2 content decreased from 60.57% to 34.02%, indicating effective separation of the silicate gangue. The results confirm the potential of dry high-intensity magnetic separation for processing manganese ore processing tailings and producing a marketable concentrate with minimal water consumption.

  • Open Access

    Electrochemical Pretreatment of Chrysocolla for Enhanced Sulfidization and Flotation: Mechanism and Process Optimization

    by Gulnara Katkeeva, Zhamila Shaike, Aidarkhan Mukhtar, Karakat Turebekova, Gulmarzhan Burkitseterkyzy, Yerlan Zhunussov, Anuar Zhunussov, Sultan Kabylkanov

    The flotation of oxidized copper minerals is limited by poor surface reactivity and the insufficient effectiveness of conventional sulfidization. This study investigated 50 Hz alternating current electrochemical pretreatment to enhance the sulfidization and flotation of chrysocolla and a natural oxidized copper ore. Operating parameters, including current density, treatment time, pulp pH, and sodium sulfide dosage, were optimized using a design of experiments approach. Phase transformations were characterized by scanning electron microscopy with energy-dispersive X-ray spectroscopy and X-ray diffraction. Pretreatment with 50 Hz alternating current promoted the surface formation of tenorite (CuO), which was subsequently transformed into covellite (CuS) during sulfidization, providing favorable conditions for subsequent flotation. The optimum conditions for chrysocolla were a current density of 100 A m−2, a pretreatment time of 0.5 min, pH 8, a sodium sulfide dosage of 25% of the stoichiometric requirement, and a sulfidization time of 2.5 min. Validation tests on natural oxidized copper ore showed that alternating current pretreatment increased copper recovery from 29.16% to 79.63% and concentrate grade from 12.84 to 25.50 wt.% compared with conventional sulfidization. These findings demonstrate that alternating current electrochemical pretreatment effectively modifies oxidized copper mineral surfaces and enhances their subsequent sulfidization and flotation, providing a promising approach for the beneficiation of refractory oxidized copper ores.