Ammar Gamal Bazarah
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ammar Gamal Bazarah has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
Aina Aqila A. Alim
Fuel Cell Institute , Universiti Kebangsaan Malaysia , Bangi 43600 , Selangor, Malaysia , ukm.my
1 shared publication- Bee Huah Lim
Fuel Cell Institute Universiti Kebangsaan Malaysia Bangi Malaysia
1 shared publication - Edy Herianto Majlan
Universiti Kebangsaan Malaysia
1 shared publication Juliana Jumadi
Fuel Cell Institute , Universiti Kebangsaan Malaysia , Bangi 43600 , Selangor, Malaysia , ukm.my
1 shared publication- Maryam Taufiq Musa
Fuel Cell Institute , Universiti Kebangsaan Malaysia , Bangi 43600 , Selangor, Malaysia , ukm.my
1 shared publication - Md Ahsanul Haque
Department of Applied Chemistry, Faculty of Science, Tokyo University of Science, 1-3 Kagurazaka, Shinjuku-ku, Tokyo 162-8601, Japan
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Chemical Engineering
- Vol. 2026 (1) , 9945399
Impact of Substrate Type and Membrane Scaling on Catalyst Transfer Efficiency in PEM Water Electrolyzers via the Decal Method
Catalyst‐coated membranes (CCMs) were fabricated using the decal transfer method to enhance catalyst transfer efficiency, performance, and stability in polymer electrolyte membrane water electrolyzers (PEMWEs). Nafion 117 and Nafion 212 membranes with active 5, 25, and 36 cm 2 areas were used, incorporating IrO 2 (anode) and Pt/C (cathode) catalysts. Catalyst inks were sprayed onto PTFE sheet, Kapton film, and Teflon‐coated fiberglass substrates, followed by hot‐pressing at 130°C and 700 psi for 5 min. A thin Nafion ionomer layer facilitated efficient catalyst transfer. Among the substrates, Teflon‐coated fiberglass achieved the highest transfer efficiency (> 95%) and uniform catalyst distribution. At 60°C and 2.0 V, the 5 cm 2 Nafion 212 and Nafion 117 CCMs delivered maximum peak current densities of 1791 and 1497 mA/cm 2 , respectively. While Nafion 212 showed higher initial performance due to its lower thickness and resistance, Nafion 117 demonstrated superior durability during 48‐h stability testing, particularly at larger membrane sizes. These results underscore the potential of the decal method for scalable CCM fabrication and highlight the importance of membrane thickness and substrate selection in developing high‐performance, durable PEMWE systems for hydrogen production.
- 1 January 2026
- Published by Wiley in International Journal of Chemical Engineering
- Vol. 2026 (1) , 9945399
Open AccessImpact of Substrate Type and Membrane Scaling on Catalyst Transfer Efficiency in PEM Water Electrolyzers via the Decal Method
Catalyst‐coated membranes (CCMs) were fabricated using the decal transfer method to enhance catalyst transfer efficiency, performance, and stability in polymer electrolyte membrane water electrolyzers (PEMWEs). Nafion 117 and Nafion 212 membranes with active 5, 25, and 36 cm 2 areas were used, incorporating IrO 2 (anode) and Pt/C (cathode) catalysts. Catalyst inks were sprayed onto PTFE sheet, Kapton film, and Teflon‐coated fiberglass substrates, followed by hot‐pressing at 130°C and 700 psi for 5 min. A thin Nafion ionomer layer facilitated efficient catalyst transfer. Among the substrates, Teflon‐coated fiberglass achieved the highest transfer efficiency (> 95%) and uniform catalyst distribution. At 60°C and 2.0 V, the 5 cm 2 Nafion 212 and Nafion 117 CCMs delivered maximum peak current densities of 1791 and 1497 mA/cm 2 , respectively. While Nafion 212 showed higher initial performance due to its lower thickness and resistance, Nafion 117 demonstrated superior durability during 48‐h stability testing, particularly at larger membrane sizes. These results underscore the potential of the decal method for scalable CCM fabrication and highlight the importance of membrane thickness and substrate selection in developing high‐performance, durable PEMWE systems for hydrogen production.