TFTakato Fukui

Takato Fukui

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Takato Fukui has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Coil-Embedded Beacon Pole for 3-D Localization of Surrounding Magnetic Flux Sensors

    by Yoshiaki Adachi, Takato Fukui, Daisuke Oyama, Tomohiko Shibuya

    In this study, we propose a novel 3D localization method using a coil-embedded beacon pole and magnetoresistive-device-based magnetic flux sensors (MR sensors) aimed at underwater applications. The beacon pole is constructed by stacking multiple cylindrical modules, each containing three elliptic coils embedded in grooves on its side surface with mutually orthogonal plane normals. The coils are oriented at 54.74° with respect to the cylinder axis and separated by 120° in azimuth. By detecting the magnetic fields generated by the coils embedded in the pole, the magnetic sensors can determine their positions in axial, radial, and circumferential directions relative to the pole. Low-frequency (30–180 Hz) fields, which are advantageous for applications in water, are generated by the pole and can be detected by the MR sensors with a high signal-to-noise ratio. Numerical simulations indicated that, although the coils were discretely arranged at 120° intervals in azimuth, the localization performance was remained effectively axisymmetric. Uniform precision was achieved in all directions, and a localization uncertainty of approximately less than 2 mm was obtained within a 1-m-diameter region around the beacon pole. However, in practical experiments using a small-scale prototype of the beacon pole, the uncertainty was limited to better than 11 mm within a 0.6-m-diameter region, reflecting real-world measurement constraints. Real-time positioning of the magnetic sensor was successfully demonstrated achieving position updates at approximately 20 Hz.

  • Magnetic Source Localization Based on Magnetic Dipole-Array Method for Demagnetizing Field Estimation

    by T. Fukui, T. Shibuya, Y. Adachi

    In this study, we address magnetic source localization under conditions where both the source and magnetic sensors are placed close to magnetic shielding material. In such environments, the magnetic field generated by the magnetic source is distorted by demagnetizing fields induced by the magnetic shielding material, leading to degradation of estimation accuracy. To address this problem, we apply the Magnetic Dipole-array Method (MDM), previously proposed to account for the influence of demagnetizing fields, to magnetic source localization. In addition, we design a cylindrical magnetic dipole array specifically for cylindrical magnetic shields, in contrast to the planar dipole array configurations for rectangular magnetic shields used in our previous studies. Experiments of magnetic source localization using coils, room-temperature magnetic sensors, and a compact cylindrical magnetic shield were conducted. The results showed that the proposed method improved the estimation accuracy, reducing the average position error from 2.7 mm to 0.59 mm compared with conventional approaches that do not account for demagnetizing fields. This study provides a fundamental investigation under controlled experimental conditions as a basis for future application of MDM to biomagnetic measurements.