Quentin Charlier
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Quentin Charlier has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Didier Imbault
Univ. Grenoble Alpes, CNRS, Grenoble INP, 3SR Lab , F-38000 Grenoble , France
3 shared publicationsBarthélémy Harthong
Univ. Grenoble Alpes, CNRS, Grenoble INP, 3SR Lab , F-38000 Grenoble , France
2 shared publicationsJean‐François Gerard
Univ‐Lyon, INSA‐Lyon, Ingénierie des Matériaux Polymères, UMR CNRS 5223 Villeurbanne France
2 shared publicationsJérémie Viguié
Univ. Grenoble Alpes, CNRS, Grenoble INP, LGP2 , F-38000 Grenoble , France
2 shared publicationsMarie Caron
Centre Technique du Papier (CTP) , F-38044 Grenoble , France
2 shared publicationsRobert Peyroux
Univ. Grenoble Alpes, CNRS, Grenoble INP, 3SR Lab , F-38000 Grenoble , France
2 shared publications
Latest Publications
- Open Access
- 19 November 2026
- Published by Walter de Gruyter GmbH in Holzforschung
Densification and reinforcement of carton boards through ultrasonic compression
This study investigates the capability of an innovative converting process, ultrasonic compression, to densify and reinforce the mechanical properties of carton boards. Ultrasonic compression is a derivative of ultrasonic welding which consists in assembling materials by applying acoustic vibrations under pressure. Under the right conditions, it can provide enough heat and pressure to trigger the flow of amorphous wood polymers, leading to a modification of the material structure. Carton boards of the same structure and composition but different grammages were subjected to ultrasonic compression with different process parameters. Changes in physical properties were determined and structures were observed. Results showed that ultrasonic compression can successfully densify carton boards from 600 to 1,200 kg/m 3 without any degradation. The level of densification can easily be adjusted by controlling process parameters. Compressed carton boards showed enhanced in-plane tensile strength and elastic properties, with an increase in ultimate stress (from 25 to 50 MPa) and Young’ modulus (from 2 to 3 GPa), but also an expected decrease in the out-of-plane bending stiffness due to thickness reduction. However, specific mechanical properties were little affected, suggesting that the change in properties was mainly due to the increase in fiber volume fraction of the material.
- 19 November 2026
- Published by Walter de Gruyter GmbH in Holzforschung
Open AccessDensification and reinforcement of carton boards through ultrasonic compression
This study investigates the capability of an innovative converting process, ultrasonic compression, to densify and reinforce the mechanical properties of carton boards. Ultrasonic compression is a derivative of ultrasonic welding which consists in assembling materials by applying acoustic vibrations under pressure. Under the right conditions, it can provide enough heat and pressure to trigger the flow of amorphous wood polymers, leading to a modification of the material structure. Carton boards of the same structure and composition but different grammages were subjected to ultrasonic compression with different process parameters. Changes in physical properties were determined and structures were observed. Results showed that ultrasonic compression can successfully densify carton boards from 600 to 1,200 kg/m 3 without any degradation. The level of densification can easily be adjusted by controlling process parameters. Compressed carton boards showed enhanced in-plane tensile strength and elastic properties, with an increase in ultimate stress (from 25 to 50 MPa) and Young’ modulus (from 2 to 3 GPa), but also an expected decrease in the out-of-plane bending stiffness due to thickness reduction. However, specific mechanical properties were little affected, suggesting that the change in properties was mainly due to the increase in fiber volume fraction of the material.
- 2 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Adhesion phenomena in thermoplastic composites based on acrylic matrices obtained by free radical polymerization
Phénomènes d'adhésion dans des composites thermoplastiques à matrice acrylique obtenue par polymérisation radicalaire: Ce mémoire de thèse s’intéresse aux phénomènes d’adhésion dans des composites à matrice thermoplastique obtenus par polymérisation radicalaire de mélanges réactifs. Après une courte introduction bibliographique sur les thématiques d’adhésion et d’adhérence, les propriétés générales des principaux éléments constitutifs des assemblages finaux sont étudiées séparément pour discuter de leur pertinence en vue d’une application composite. Une attention particulière est portée sur les systèmes réactifs acryliques à l’état liquide. L’étude se concentre ensuite sur les mécanismes réactionnels et l’évolution des propriétés des systèmes réactifs lors de la polymérisation. Ces problématiques sont de première importance pour anticiper les mécanismes gouvernant l’adhésion dans les composites obtenus mais aussi pour appréhender les potentielles problématiques à venir lors des étapes de mise en forme. Enfin, une étude est spécifiquement dédiée au cas de l’adhésion entre matrice acrylique et fibres de verre dans des composites à fibres de renfort continues. Les propriétés à l’interface verre/acrylique ont été évaluées à l’échelle microscopique dans des systèmes modèles et à l’échelle macroscopique dans des composites unidirectionnels, c'est à dire pouvant les défauts d’adhésion générés lors de la mise en forme. L’ensemble de ces résultats permet de se positionner quant à l’utilisation de solutions acryliques thermoplastiques pour des applications composites structuraux.
- 2 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Adhesion phenomena in thermoplastic composites based on acrylic matrices obtained by free radical polymerization
Phénomènes d'adhésion dans des composites thermoplastiques à matrice acrylique obtenue par polymérisation radicalaire: Ce mémoire de thèse s’intéresse aux phénomènes d’adhésion dans des composites à matrice thermoplastique obtenus par polymérisation radicalaire de mélanges réactifs. Après une courte introduction bibliographique sur les thématiques d’adhésion et d’adhérence, les propriétés générales des principaux éléments constitutifs des assemblages finaux sont étudiées séparément pour discuter de leur pertinence en vue d’une application composite. Une attention particulière est portée sur les systèmes réactifs acryliques à l’état liquide. L’étude se concentre ensuite sur les mécanismes réactionnels et l’évolution des propriétés des systèmes réactifs lors de la polymérisation. Ces problématiques sont de première importance pour anticiper les mécanismes gouvernant l’adhésion dans les composites obtenus mais aussi pour appréhender les potentielles problématiques à venir lors des étapes de mise en forme. Enfin, une étude est spécifiquement dédiée au cas de l’adhésion entre matrice acrylique et fibres de verre dans des composites à fibres de renfort continues. Les propriétés à l’interface verre/acrylique ont été évaluées à l’échelle microscopique dans des systèmes modèles et à l’échelle macroscopique dans des composites unidirectionnels, c'est à dire pouvant les défauts d’adhésion générés lors de la mise en forme. L’ensemble de ces résultats permet de se positionner quant à l’utilisation de solutions acryliques thermoplastiques pour des applications composites structuraux.
- 6 October 2022
- Published by Springer Nature in Cellulose
- Vol. 29 (18) , 9939-9951
Ultrasonic welding of poly(vinyl alcohol) coated-papers hydrophobized by chromatogeny grafting
- 6 October 2022
- Published by Springer Nature in Cellulose
- Vol. 29 (18) , 9939-9951
Ultrasonic welding of poly(vinyl alcohol) coated-papers hydrophobized by chromatogeny grafting
- 16 August 2021
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 52 (8) , 891-906
Experimental investigation and process optimization of the ultrasonic welding applied to papers
Ultrasonic welding is a serious candidate in the development of methods to assemble papers and paperboards without using additional substances. However, the ultrasonic welding of papers remains a technological challenge considering the low weldability of lignocellulosic materials. This study aims to investigate on the ultrasonic welding process applied to papers in order to identify the processing conditions which favor the formation of strong welded joints. To reach such purpose, an experimental strategy was developed by combining the characterization of welded materials and the monitoring of process parameters. Experimentations were performed using a reference paper displaying a good weldability to specifically highlight the contribution of process parameters. Results indicate that the process is highly sensitive to vibration amplitude, power supplied by the high frequency generator, and sample thickness. Power seems to be a reliable indicator of the severity of the process. A strong decrease in the strength of the welded joints is observed when working with low thicknesses. It seems that the layers coated on top of papers are the main part of the material contributing in the development of adhesion at the welding joint. Overall, instrumenting the device has led to a better understanding of the ultrasonic welding of papers.
- 16 August 2021
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 52 (8) , 891-906
Experimental investigation and process optimization of the ultrasonic welding applied to papers
Ultrasonic welding is a serious candidate in the development of methods to assemble papers and paperboards without using additional substances. However, the ultrasonic welding of papers remains a technological challenge considering the low weldability of lignocellulosic materials. This study aims to investigate on the ultrasonic welding process applied to papers in order to identify the processing conditions which favor the formation of strong welded joints. To reach such purpose, an experimental strategy was developed by combining the characterization of welded materials and the monitoring of process parameters. Experimentations were performed using a reference paper displaying a good weldability to specifically highlight the contribution of process parameters. Results indicate that the process is highly sensitive to vibration amplitude, power supplied by the high frequency generator, and sample thickness. Power seems to be a reliable indicator of the severity of the process. A strong decrease in the strength of the welded joints is observed when working with low thicknesses. It seems that the layers coated on top of papers are the main part of the material contributing in the development of adhesion at the welding joint. Overall, instrumenting the device has led to a better understanding of the ultrasonic welding of papers.
- 8 November 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (20)
How does paraffin wax prevent evaporation of acrylic‐based syrups dedicated to fiber‐reinforced composite processing?
This study focuses on volatility and processing issues which can be faced when handling acrylic syrups designed for adhesive or composite applications. These reactive mixtures which are mainly constituted of methyl methacrylate (MMA) and poly(methyl methacrylate) (PMMA) can yield thermoplastic matrices through radical polymerization. However, the rapid evaporation of acrylic monomers when syrups are exposed to air raises serious manufacturing and H&S concerns, especially when relying on open‐mold processes. A common strategy to prevent this phenomenon is to add paraffin wax to the syrup. However the mechanisms which rule the inhibition of evaporation have never been clearly identified so far. In this context, confocal Raman microscopy has been used to perform depth profilings to evaluate the chemical composition of wax–acrylic syrups from surface to bulk. Results show that the wax content is much higher at the surface than in bulk which leads to the formation of a solid film. This concentration gradient results from two distinct phenomena: the migration of wax at the surface and, to a lesser extent, the evaporation of near‐surface MMA monomers. Thus, the capability of these syrups to impregnate reinforcing fibers is largely decreased which could be of prime concern regarding their application. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 137, 48685.
- 8 November 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (20)
How does paraffin wax prevent evaporation of acrylic‐based syrups dedicated to fiber‐reinforced composite processing?
This study focuses on volatility and processing issues which can be faced when handling acrylic syrups designed for adhesive or composite applications. These reactive mixtures which are mainly constituted of methyl methacrylate (MMA) and poly(methyl methacrylate) (PMMA) can yield thermoplastic matrices through radical polymerization. However, the rapid evaporation of acrylic monomers when syrups are exposed to air raises serious manufacturing and H&S concerns, especially when relying on open‐mold processes. A common strategy to prevent this phenomenon is to add paraffin wax to the syrup. However the mechanisms which rule the inhibition of evaporation have never been clearly identified so far. In this context, confocal Raman microscopy has been used to perform depth profilings to evaluate the chemical composition of wax–acrylic syrups from surface to bulk. Results show that the wax content is much higher at the surface than in bulk which leads to the formation of a solid film. This concentration gradient results from two distinct phenomena: the migration of wax at the surface and, to a lesser extent, the evaporation of near‐surface MMA monomers. Thus, the capability of these syrups to impregnate reinforcing fibers is largely decreased which could be of prime concern regarding their application. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 137, 48685.
- 2 July 2019
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (19) , 12938-12950
Ultrasonic welding of 100% lignocellulosic papers
- 2 July 2019
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (19) , 12938-12950
Ultrasonic welding of 100% lignocellulosic papers
- 18 December 2018
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (15)
Rheokinetic study of acrylic reactive mixtures dedicated to fast processing of fiber‐reinforced thermoplastic composites
This study focuses on the characterization of acrylic reactive mixtures designed for liquid composite molding (LCM) and yielding thermoplastic matrices for composite applications. Conversion degree, complex viscosity, and cure exothermicity are tracked during the radical polymerization. Results show that these systems suffer from Trommsdorff's effect, that is, the polymerization is highly exothermic. The rheological study also highlights a limit of injectability for LCM processes around a conversion degree of 10%. The vitrification curve, which correlates conversion degree to glass‐transition temperature, has been established for methyl methacrylate/poly(methyl methacrylate) mixtures. It constitutes a useful tool to identify the thermal conditions required to reach a full monomer conversion and thus, to manage the residual monomer content. The use of such acrylic‐based reactive solutions for fast LCM processing appears appropriate as fully polymerized matrices were obtained in less than 5 min at 90 °C. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47391.
- 18 December 2018
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (15)
Rheokinetic study of acrylic reactive mixtures dedicated to fast processing of fiber‐reinforced thermoplastic composites
This study focuses on the characterization of acrylic reactive mixtures designed for liquid composite molding (LCM) and yielding thermoplastic matrices for composite applications. Conversion degree, complex viscosity, and cure exothermicity are tracked during the radical polymerization. Results show that these systems suffer from Trommsdorff's effect, that is, the polymerization is highly exothermic. The rheological study also highlights a limit of injectability for LCM processes around a conversion degree of 10%. The vitrification curve, which correlates conversion degree to glass‐transition temperature, has been established for methyl methacrylate/poly(methyl methacrylate) mixtures. It constitutes a useful tool to identify the thermal conditions required to reach a full monomer conversion and thus, to manage the residual monomer content. The use of such acrylic‐based reactive solutions for fast LCM processing appears appropriate as fully polymerized matrices were obtained in less than 5 min at 90 °C. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47391.