György Fegyverneki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
György Fegyverneki has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Gábor Gyarmati
Institute of Metallurgy and Foundry Engineering, University of Miskolc, Miskolc-Egyetemváros, Hungary
3 shared publications - Tamás Mende
Institute of Physical Metallurgy, Metal Forming and Nanotechnology, Faculty of Materials and Chemical Engineering, University of Miskolc, 3515 Miskolc, Hungary
3 shared publications - Daniel Molnar
Theory of Condensed Matter Group Cavendish Laboratory University of Cambridge CB3 0HE UK
1 shared publication Dániel Molnár
Foundry Institute, University of Miskolc, Miskolc-Egyetemváros, Hungary
1 shared publication- Erzsébet Cserta
Hungarian Mobility Development Agency Zrt
1 shared publication - Fanni Vincze
Foundry Institute, University of Miskolc, Miskolc-Egyetemváros, Hungary
1 shared publication
Latest Publications
- 6 March 2025
- Published by Springer Nature
- p. 261-270
Impact of Cybersecurity on Old-Type Steel Manufacturing Industrial Processes
- 6 March 2025
- Published by Springer Nature
- p. 261-270
Impact of Cybersecurity on Old-Type Steel Manufacturing Industrial Processes
- Open Access
- 30 September 2022
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 11 (5) , 774-789
Evaluation of the Applicability of Computer-Aided Porosity Testing Methods for Different Pore Structures
Porosity plays an important role in the properties of powder metallurgy products and castings. Nowadays, there are several methods for determining porosity: optical microscopy, computed tomography, and density measurement according to Archimedes’ principle. The aim of this study is to present the advantages and disadvantages of different porosity testing methods and the relationships between the results. With conventional metallographic methods, only two-dimensional information about pores is obtained. The accuracy of a three-dimensional CT examination is significantly affected by the resolution, the quality of the image, and the evaluation process. The porosities of aluminum (AlSi7MgCu0.5) reduced pressure test samples with different densities were determined on 3D x-ray images with the evaluation software VGStudio MAX 3.3 and on 2D section x-ray images and the optical microscope images with the image analysis software ImageJ. The effect of morphological transformation of 3D images and the role of the region of interest volume and area under examination are also discussed.
- 30 September 2022
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 11 (5) , 774-789
Open AccessEvaluation of the Applicability of Computer-Aided Porosity Testing Methods for Different Pore Structures
Porosity plays an important role in the properties of powder metallurgy products and castings. Nowadays, there are several methods for determining porosity: optical microscopy, computed tomography, and density measurement according to Archimedes’ principle. The aim of this study is to present the advantages and disadvantages of different porosity testing methods and the relationships between the results. With conventional metallographic methods, only two-dimensional information about pores is obtained. The accuracy of a three-dimensional CT examination is significantly affected by the resolution, the quality of the image, and the evaluation process. The porosities of aluminum (AlSi7MgCu0.5) reduced pressure test samples with different densities were determined on 3D x-ray images with the evaluation software VGStudio MAX 3.3 and on 2D section x-ray images and the optical microscope images with the image analysis software ImageJ. The effect of morphological transformation of 3D images and the role of the region of interest volume and area under examination are also discussed.
- Open Access
- 17 January 2022
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 53 (2) , 1244-1257
The Effect of Rotary Degassing Treatments with Different Purging Gases on the Double Oxide- and Nitride Film Content of Liquid Aluminum Alloys
Rotary degassing is one of the most frequently used melt treatment technologies used for processing liquid aluminum alloys. Despite this, the information available about the possible effects of this method on the double oxide- and nitride film (bifilm) content, especially when using different purging gases, is quite limited. For this reason, in this study, the effects of multiple rotary degassing treatments conducted with N2 and Ar purging gases on the bifilm quantity of a casting aluminum alloy were compared. The characterization of the melt quality was realized by the computed tomographic (CT) analysis of reduced pressure test (RPT) specimens, image analysis, and scanning electron microscopy (SEM) of the fracture surfaces of K-mold samples. Based on the results, by the application of Ar as a purging gas, relatively low bifilm content can be achieved. On the other hand, while the use of N2 leads to the formation of numerous small-sized nitride bifilms, which significantly increased the pore number density inside the RPT specimens. This can be associated with the nitride formation by the chemical reaction between the liquid aluminum alloy and the N2 purging gas bubbles during the degassing treatments. Graphical abstract
- 17 January 2022
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 53 (2) , 1244-1257
Open AccessThe Effect of Rotary Degassing Treatments with Different Purging Gases on the Double Oxide- and Nitride Film Content of Liquid Aluminum Alloys
Rotary degassing is one of the most frequently used melt treatment technologies used for processing liquid aluminum alloys. Despite this, the information available about the possible effects of this method on the double oxide- and nitride film (bifilm) content, especially when using different purging gases, is quite limited. For this reason, in this study, the effects of multiple rotary degassing treatments conducted with N2 and Ar purging gases on the bifilm quantity of a casting aluminum alloy were compared. The characterization of the melt quality was realized by the computed tomographic (CT) analysis of reduced pressure test (RPT) specimens, image analysis, and scanning electron microscopy (SEM) of the fracture surfaces of K-mold samples. Based on the results, by the application of Ar as a purging gas, relatively low bifilm content can be achieved. On the other hand, while the use of N2 leads to the formation of numerous small-sized nitride bifilms, which significantly increased the pore number density inside the RPT specimens. This can be associated with the nitride formation by the chemical reaction between the liquid aluminum alloy and the N2 purging gas bubbles during the degassing treatments. Graphical abstract
- Open Access
- 1 November 2021
- Published by Elsevier in Materials Characterization
- Vol. 181, 111467
Controlled precipitation of intermetallic (Al,Si)3Ti compound particles on double oxide films in liquid aluminum alloys
- 1 November 2021
- Published by Elsevier in Materials Characterization
- Vol. 181, 111467
Open AccessControlled precipitation of intermetallic (Al,Si)3Ti compound particles on double oxide films in liquid aluminum alloys
- Open Access
- 15 April 2020
- Published by University of Debrecen/ Debreceni Egyetem in International Journal of Engineering and Management Sciences
- Vol. 5 (2) , 141-153
Investigation on Double Oxide Film Initiated Pore Formation in Aluminum Casting Alloys
The most common, and in fact, the most deleterious defects of aluminum casting alloys are the so-called double oxide films or bifilms, which have a central role in porosity formation, as they can easily unfurl and inflate into pores during the solidification of the alloys. Sr addition is generally used in the foundry industry for the modification of the eutectic Si phase of hypoeutectic Al-Si alloys. However, Sr microalloying usually leads to an increased pore formation tendency. As bifilms are preferred sites for pore formation, it should be expected that Sr additions have a significant effect on the number and/or the structure of double oxide films present in the melt. In this work, the relationship between Sr-concentration and the susceptibility to pore formation has been investigated through the evaluation of melt quality of melts which had different levels of Sr. The bifilm content of the melts was investigated by the analysis of K-mold specimens and X-ray computed tomography (CT) of reduced pressure test (RPT) samples. It was found that liquid alloys with a higher Sr concentration had a significantly greater tendency to pore formation, which can be explained by the presence of a larger number of bifilm defects in the liquid alloy.
- 15 April 2020
- Published by University of Debrecen/ Debreceni Egyetem in International Journal of Engineering and Management Sciences
- Vol. 5 (2) , 141-153
Open AccessInvestigation on Double Oxide Film Initiated Pore Formation in Aluminum Casting Alloys
The most common, and in fact, the most deleterious defects of aluminum casting alloys are the so-called double oxide films or bifilms, which have a central role in porosity formation, as they can easily unfurl and inflate into pores during the solidification of the alloys. Sr addition is generally used in the foundry industry for the modification of the eutectic Si phase of hypoeutectic Al-Si alloys. However, Sr microalloying usually leads to an increased pore formation tendency. As bifilms are preferred sites for pore formation, it should be expected that Sr additions have a significant effect on the number and/or the structure of double oxide films present in the melt. In this work, the relationship between Sr-concentration and the susceptibility to pore formation has been investigated through the evaluation of melt quality of melts which had different levels of Sr. The bifilm content of the melts was investigated by the analysis of K-mold specimens and X-ray computed tomography (CT) of reduced pressure test (RPT) samples. It was found that liquid alloys with a higher Sr concentration had a significantly greater tendency to pore formation, which can be explained by the presence of a larger number of bifilm defects in the liquid alloy.