Márton Vavrik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Márton Vavrik has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Gabor Cseh
HUN-REN Centre for Energy Research, Konkoly-Thege út 29-33, 1121 Budapest, Hungary
4 shared publications - Gábor Kocsis
HUN-REN EK
4 shared publications - Tamás Szepesi
HUN-REN Centre for Energy Research, Budapest, Hungary
4 shared publications - Nerea Panadero
Laboratorio Nacional de Fusión, CIEMAT
3 shared publications - Sandor Zoletnik
HUN-REN Centre for Energy Research 1 , Budapest
3 shared publications - Fabien Jaulmes
Institute of Plasma Physics of the Czech Academy of Sciences
2 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Feasibility of fast-alpha diagnostics with Pellet Charge Exchange
Characterization of fusion alpha particles is essential for the study of plasmas with significant alpha heating and, consequently, for the scientific success of ITER. Current diagnostic plans include gamma spectroscopy, collective Thomson scattering, charge exchange recombination spectroscopy, and a fast ion loss detector, although it remains unclear whether these methods will fully meet the requirements of this novel experiment. Pellet Charge Exchange (PCX) is an alternative approach in which alpha particles acquire electrons from the neutral cloud of an ablating fueling pellet through charge exchange, producing He+ ions and He atoms. The concept was previously tested in TFTR experiments, where escaping He atoms were analyzed using a neutral particle analyzer. In this work, a new optical approach is explored by modeling the emission of excited He+ ions produced in the charge exchange reactions. This signal could provide information on the density, energy, and distribution of fusion alpha particles along the pellet flight path, in the pedestal region of the plasma. The presented results are based on solving a system of rate equations for the n-resolved ionization states of alpha particles propagating through pellet clouds, with cloud parameters obtained from the Hydrogen Pellet Injection code HPI2. The model tracks the populations of ionization and excitation states of helium in one dimension, including the density of He+ (n = 4) states whose emission would be observed. Estimates of emission intensity and signal-to-background ratio based on expected bremsstrahlung radiation are also provided, identifying viable parameter ranges for PCX diagnostics.
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Open AccessFeasibility of fast-alpha diagnostics with Pellet Charge Exchange
Characterization of fusion alpha particles is essential for the study of plasmas with significant alpha heating and, consequently, for the scientific success of ITER. Current diagnostic plans include gamma spectroscopy, collective Thomson scattering, charge exchange recombination spectroscopy, and a fast ion loss detector, although it remains unclear whether these methods will fully meet the requirements of this novel experiment. Pellet Charge Exchange (PCX) is an alternative approach in which alpha particles acquire electrons from the neutral cloud of an ablating fueling pellet through charge exchange, producing He+ ions and He atoms. The concept was previously tested in TFTR experiments, where escaping He atoms were analyzed using a neutral particle analyzer. In this work, a new optical approach is explored by modeling the emission of excited He+ ions produced in the charge exchange reactions. This signal could provide information on the density, energy, and distribution of fusion alpha particles along the pellet flight path, in the pedestal region of the plasma. The presented results are based on solving a system of rate equations for the n-resolved ionization states of alpha particles propagating through pellet clouds, with cloud parameters obtained from the Hydrogen Pellet Injection code HPI2. The model tracks the populations of ionization and excitation states of helium in one dimension, including the density of He+ (n = 4) states whose emission would be observed. Estimates of emission intensity and signal-to-background ratio based on expected bremsstrahlung radiation are also provided, identifying viable parameter ranges for PCX diagnostics.
- 21 October 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 234
Optimizing fuelling pellet injection geometry for COMPASS Upgrade using HPI2
- 21 October 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 234
Optimizing fuelling pellet injection geometry for COMPASS Upgrade using HPI2
- Open Access
- 20 May 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 229
Gas flow and dust in Shattered Pellet Injection
- 20 May 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 229
Open AccessGas flow and dust in Shattered Pellet Injection
- Open Access
- 28 April 2026
- Published by Elsevier in SSRN Electronic Journal
Optimizing fuelling pellet injection geometry for COMPASS Upgrade using HPI2
COMPASS Upgrade (COMPASS-U) [1] is a high-magnetic field (5 T) tokamak, currently being built at the Institute of Plasma Physics in Prague. The HUN-REN Centre for Energy Research plans to develop a pellet injector for COMPASS-U. This work aims to optimize the pellet injector parameters - pellet velocity, size, injection direction, and investigates the pellet-plasma interaction, using various plasma scenarios of the Compass Upgrade tokamak with the HPI2 code [2]. HPI2 is a widely used pellet injection simulation code that can handle 3D geometries and related secondary phenomena, like inhomogeneous pellet ablation.The dependence of material deposition and penetration depth on pellet size and velocity were examined, and for the desired material deposition, pellets with a radius of 0.75 mm should be injected into the plasma. Higher injection velocity is advantageous, but based on technical considerations, simulations were run using an injection velocity of 500 m/s.The properties of different injection directions were explored, in several scenarios, from early L-mode to the high-performance H-mode scenario, based on which the optimal injection geometry of the pellet injector was defined. While LFS injection is the easiest to realize technically, it results in the least efficient fuelling, as expected, as drift phenomena quickly accelerates the pellet cloud out from the plasma. The internal, HFS injection is the most efficient, where the drift direction points inward the plasma; due to accessibility constraints, pellets cannot be delivered here. A good compromise is the vertical (VHFS) injection, from an existing port. Relaxation of the plasma profiles after the injection were also investigated to characterise the pacing requirements of the injection.[1]: M. Komm et al, COMPASS Upgrade: a high-field tokamak for ITER- and DEMO-relevant research (2024) Nucl. Fusion 64 076028[2]: F. Koechl et al, Modelling of Pellet Particle Ablation and Deposition: The Hydrogen Pellet Injection code HPI2 (2014), EFDA–JET–PR(12)57, Nuclear Fusion
- 28 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOptimizing fuelling pellet injection geometry for COMPASS Upgrade using HPI2
COMPASS Upgrade (COMPASS-U) [1] is a high-magnetic field (5 T) tokamak, currently being built at the Institute of Plasma Physics in Prague. The HUN-REN Centre for Energy Research plans to develop a pellet injector for COMPASS-U. This work aims to optimize the pellet injector parameters - pellet velocity, size, injection direction, and investigates the pellet-plasma interaction, using various plasma scenarios of the Compass Upgrade tokamak with the HPI2 code [2]. HPI2 is a widely used pellet injection simulation code that can handle 3D geometries and related secondary phenomena, like inhomogeneous pellet ablation.The dependence of material deposition and penetration depth on pellet size and velocity were examined, and for the desired material deposition, pellets with a radius of 0.75 mm should be injected into the plasma. Higher injection velocity is advantageous, but based on technical considerations, simulations were run using an injection velocity of 500 m/s.The properties of different injection directions were explored, in several scenarios, from early L-mode to the high-performance H-mode scenario, based on which the optimal injection geometry of the pellet injector was defined. While LFS injection is the easiest to realize technically, it results in the least efficient fuelling, as expected, as drift phenomena quickly accelerates the pellet cloud out from the plasma. The internal, HFS injection is the most efficient, where the drift direction points inward the plasma; due to accessibility constraints, pellets cannot be delivered here. A good compromise is the vertical (VHFS) injection, from an existing port. Relaxation of the plasma profiles after the injection were also investigated to characterise the pacing requirements of the injection.[1]: M. Komm et al, COMPASS Upgrade: a high-field tokamak for ITER- and DEMO-relevant research (2024) Nucl. Fusion 64 076028[2]: F. Koechl et al, Modelling of Pellet Particle Ablation and Deposition: The Hydrogen Pellet Injection code HPI2 (2014), EFDA–JET–PR(12)57, Nuclear Fusion
- Open Access
- 7 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (9) , 096033
Production and launch studies of cryogenic pellets for the ITER disruption mitigation system
A support laboratory has been set up to study pellet production, launch and shattering of cryogenic protium, deuterium, and neon pellets for the ITER disruption mitigation system, which plans to use 28.5 × 57 mm (diameter × length) protium, neon an mixture pellets in the Shattered Pellet Injectors. Such large protium pellets have not been produced and launched before, therefore the desublimation and launch process have been studied in detail in two steps. First 19 mm diameter pellets were produced, followed by the demonstration of the final pellet size. Pellet desublimation recipes were established for all pellet types, and it was found that, under certain conditions, even the large neon pellets can be launched with a propellant gas pulse, without requiring a mechanical punch device. This is attributed to cryogenic snow formation on the surface of the pellet. Conditions for the snow formation are studied and tendencies are understood using simple calculations.
- 7 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (9) , 096033
Open AccessProduction and launch studies of cryogenic pellets for the ITER disruption mitigation system
A support laboratory has been set up to study pellet production, launch and shattering of cryogenic protium, deuterium, and neon pellets for the ITER disruption mitigation system, which plans to use 28.5 × 57 mm (diameter × length) protium, neon an mixture pellets in the Shattered Pellet Injectors. Such large protium pellets have not been produced and launched before, therefore the desublimation and launch process have been studied in detail in two steps. First 19 mm diameter pellets were produced, followed by the demonstration of the final pellet size. Pellet desublimation recipes were established for all pellet types, and it was found that, under certain conditions, even the large neon pellets can be launched with a propellant gas pulse, without requiring a mechanical punch device. This is attributed to cryogenic snow formation on the surface of the pellet. Conditions for the snow formation are studied and tendencies are understood using simple calculations.
- 1 December 2023
- Published by American Association of Physics Teachers (AAPT) in The Physics Teacher
- Vol. 61 (9) , 804-805
The simplest schlieren imaging using a smartphone
Schlieren optics and the very similar shadowgraph are density-gradient visualization techniques that have been widely used in education and research for a very
- 1 December 2023
- Published by American Association of Physics Teachers (AAPT) in The Physics Teacher
- Vol. 61 (9) , 804-805
The simplest schlieren imaging using a smartphone
Schlieren optics and the very similar shadowgraph are density-gradient visualization techniques that have been widely used in education and research for a very