AZAlla Ziuzko

Alla Ziuzko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alla Ziuzko has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of a strategy for using the bispectrum of dangerous parameters to determine an informative signs of detection of materials inflammation

    by Igor Tolok, Boris Pospelov, Evgeniy Rybka, Yurii Kozar, Olekcii Krainiukov, Yuriy Yatsentyuk, Yurii Olshevskyi, Olena Petrova, Natalia Shevchuk, Alla Ziuzko

    The object of the study is an informative sign of detecting ignition of materials in premises based on the assessment of the bispectrum of a dangerous parameter of the gas environment. The problem is to develop a strategy for using the bispectrum to determine an informative sign of detecting ignition of materials based on the observation of an arbitrary dangerous parameter of the gas environment in the premises. It is proposed to determine a new informative sign by a measure of the average degree of "order" for each frequency in the spectrum of dynamics of an arbitrary dangerous parameter of the gas environment at a fixed observation interval. The proposed informative sign was experimentally verified by studying the spectra of the average degree of “order” of the dynamics of the main dangerous parameters of the gas environment during the ignition of materials in a laboratory chamber. It was established that during the ignition of materials, the values of the average degree of “order” of the dynamics of temperature and carbon monoxide concentration for all studied frequencies of the spectrum are significantly reduced and do not exceed the value of 0.1. This indicates a loss of the average degree of “order” for all studied frequencies of the spectrum of dynamics of temperature and carbon monoxide concentration. At the same time, the value of the average degree of “order” of the dynamics of the specific optical density of smoke with respect to the studied frequencies does not change significantly. The obtained results are useful from a theoretical point of view by using the bispectrum for an informative sign of ignition and a measure of the average degree of “order” for an arbitrary dangerous parameter of the gas environment. The practical significance lies in the possibility of further improvement of existing fire protection of objects in order to prevent fires.

  • Open Access

    Development of conditions for obtaining oil from sunflower oil hydration waste

    by Dmytro Saveliev, Vasyl Rotar, Mikhail Kravtsov, Olena Petrova, Alla Ziuzko, Natalia Shevchuk, Svitlana Velma, Anzhela Rozumenko, Viktor Demenko, Taras Samchenko

    The object of the study is the process of treatment of sunflower phosphatide concentrate using sodium chloride solution. Hydration is a stage of oil refining. The waste of the process is a phosphatide concentrate, the disposal of which is dangerous to the environment. The concentrate contains valuable components – oil and phosphatides. An important task is to separate these components for effective use in various industries. The process of extracting oil from phosphatide concentrate by hydration in the presence of sodium chloride solution was investigated. The influence of the concentrate treatment conditions on the oil yield was determined. A sample of concentrate according to SOU 15.4-37-212:2004 (CAS 3436-44-0) was used: mass fraction of moisture and volatile substances – 2.8 %, mass fraction of phosphatides – 41.5 %. The concentrate was treated with sodium chloride solution with a concentration of (5–20) %. The hydration time was 25 min., the temperature was 45 °C, and the mass ratio of the sodium chloride solution to the concentrate was 1:1. Conditions for the concentrate treatment were determined: the concentration of sodium chloride solution was 15 %, settling time was 5 hours. At the same time, the yield of oil was 86.9 %. The parameters of the extracted oil were determined: acid value 2.8 mg KOH/g, peroxide value 3.2 ½ O mmol/kg, mass fraction of moisture and volatile substances 0.12 %. According to these indicators, the extracted oil corresponds to first-grade unrefined unfrozen sunflower oil according to DSTU 4492. The mass fraction of phosphorus-containing substances in terms of stearooleolecithin was 1.7 %, which slightly exceeds the standard value. The research results make it possible to process hydration waste and obtain oil, which is a raw material for the products of many industries. This will help solve the problem of disposal of environmentally hazardous waste and improve the state of the environment

  • Open Access

    Improving the technology of waxes obtaining from oil and fat waste

    by Dmytro Saveliev, Olena Petrova, Pavlo Kovalov, Oleksandr Cherkashyn, Natalia Shevchuk, Nataliia Markova, Alla Ziuzko, Mykola Pidhorodetskyi, Anatolii Rozumenko, Oleksandr Ivashchuk

    The object of the research is the extraction of waxes from the waste of the oil and fat industry – spent perlite. As a result of oil winterization, a significant amount of spent filter powders is formed, the disposal of which poses a danger to the environment. At the same time, winterization waste contains a significant amount of oil and wax, which are important components of many types of products. Oil and wax extraction involves the use of volatile, fire-hazardous solvents. An urgent task is to develop new safe and effective technologies for obtaining oils and waxes from winterization waste. The technology of extracting waxes from spent perlite, obtained as a result of winterization of sunflower oil, which involves treatment of perlite with sodium chloride solution, was investigated. Perlite was used according to SOU 15.4-37-210:2004 (CAS Number 93763-70-3) with indicators: mass fraction of fat – 20.1 %, peroxide value – 19.5 ½ O mmol/kg, acid value – 3.5 mg KOH/g. The temperature of mass settling after treatment with sodium chloride is 20 °C, the duration – 10 hours. The following rational conditions for perlite processing using sodium chloride were determined: the concentration of dry sodium chloride (by weight of perlite) – 35.0 %, the duration of mass boiling – 30 minutes. Under these conditions, the experimental value of the saponification value of the obtained wax was 120.5 mg KOH/g. Wax quality indicators: melting point 71.5 °C, acid value 1.6 mg KOH/g, mass fraction of moisture 0.63 %. The obtained results make it possible to obtain high-quality waxes from the waste of the oil and fat industry using a safe and affordable substance (sodium chloride). This will make it possible to avoid the need for waste disposal and increase the profitability of oil and fat enterprises due to obtaining valuable products from production waste