Victor Dolgonosov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Victor Dolgonosov has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Dmitriy Ozhigin
Abylkas Saginov Karaganda Technical University
3 shared publications - Vera F. Yartseva
Department of Mine Surveying and Geodesy, Abylkas Saginov Karaganda Technical University, Karaganda 100027, Kazakhstan
3 shared publications A. Saginov Karaganda Technical University (KarTU)
2 shared publicationsInstitute of Comprehensive Exploitation of Mineral Resources Russian Academy of Sciences
2 shared publications- O. V. Starostina
Abylkas Saginov Karaganda Technical University
2 shared publications S. B. Aliev
2 shared publications
Latest Publications
- 5 October 2026
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 9(257),p. 41-46
ОБОСНОВАНИЕ ПАРАМЕТРОВ АНКЕРНОГО КРЕПЛЕНИЯ ПОДГОТОВИТЕЛЬНЫХ ГОРНЫХ ВЫРАБОТОК В УСЛОВИЯХ СЛОИСТЫХ И НАРУШЕННЫХ ПОРОД КАРАГАНДИНСКОГО УГОЛЬНОГО БАССЕЙНА
В статье обоснованы параметры анкерного крепления подготовительных выработок в слоистых и тектонически нарушенных породах Карагандинского угольного бассейна. По результатам геолого-структурного анализа, натурных наблюдений и расчетов определены высота свода естественного равновесия, рациональные длина и шаг анкеров, распределение нагрузки между уровнями крепи. Установлено, что при высоте свода более 1,3 м, развитой трещиноватости и слабых алевролито-аргиллитовых прослоях требуется двухуровневое анкерование. Длина анкеров составляет 2,0–2,6 м, шаг – 0,8–1,2 м. Такая система снижает раскрытие межслоевых трещин на 32–45%, прогиб кровли на 26–38% и вероятность разрушения в 2,6–3,1 раза. Результаты применимы при разработке паспортов крепления и адаптации анкерования к геомеханическим условиям Мақалада Қарағанды көмір бассейнінің қабатты және тектоникалық бұзылған жыныстарындағы дайындық қазбаларын анкерлік бекіту параметрлері негізделген. Геологиялық-құрылымдық талдау, натурлық бақылаулар және есептеулер бойынша табиғи тепе-теңдік күмбезінің биіктігі, анкерлердің ұтымды ұзындығы мен қадамы, сондай-ақ бекітпе деңгейлері арасындағы жүктеменің таралуы анықталды. Күмбез биіктігі 1,3 м-ден асқанда, жарықшақтылық дамыған және әлсіз алевролит-аргиллит қабатшалары болған жағдайда екі деңгейлі анкерлеу қажет. Анкерлердің ұзындығы 2,0–2,6 м, орнату қадамы 0,8–1,2 м. Бұл жүйе қабатаралық жарықтардың ашылуын 32–45%, төбе иілуін 26–38% азайтып, бұзылу ықтималдығын 2,6–3,1 есе төмендетеді. Нәтижелер бекіту паспорттарын әзірлеуге арналған The article substantiates rock-bolt support parameters for development workings in layered and tectonically disturbed rocks of the Karaganda Coal Basin. Geological-structural analysis, fi eld observations, and engineering calculations were used to determine the natural equilibrium arch height, rational bolt length and spacing, and load distribution between support levels. Two-level bolting is required when the arch height exceeds 1.3 m, fracturing is developed, and weak siltstone–mudstone interlayers are present. Rational bolt length is 2.0–2.6 m, with spacing of 0.8–1.2 m. The system reduces interlayer crack opening by 32–45%, roof defl ection by 26–38%, and failure probability by 2.6–3.1 times. The results can be used in support design documentatio
- 5 October 2026
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 9(257),p. 41-46
ОБОСНОВАНИЕ ПАРАМЕТРОВ АНКЕРНОГО КРЕПЛЕНИЯ ПОДГОТОВИТЕЛЬНЫХ ГОРНЫХ ВЫРАБОТОК В УСЛОВИЯХ СЛОИСТЫХ И НАРУШЕННЫХ ПОРОД КАРАГАНДИНСКОГО УГОЛЬНОГО БАССЕЙНА
В статье обоснованы параметры анкерного крепления подготовительных выработок в слоистых и тектонически нарушенных породах Карагандинского угольного бассейна. По результатам геолого-структурного анализа, натурных наблюдений и расчетов определены высота свода естественного равновесия, рациональные длина и шаг анкеров, распределение нагрузки между уровнями крепи. Установлено, что при высоте свода более 1,3 м, развитой трещиноватости и слабых алевролито-аргиллитовых прослоях требуется двухуровневое анкерование. Длина анкеров составляет 2,0–2,6 м, шаг – 0,8–1,2 м. Такая система снижает раскрытие межслоевых трещин на 32–45%, прогиб кровли на 26–38% и вероятность разрушения в 2,6–3,1 раза. Результаты применимы при разработке паспортов крепления и адаптации анкерования к геомеханическим условиям Мақалада Қарағанды көмір бассейнінің қабатты және тектоникалық бұзылған жыныстарындағы дайындық қазбаларын анкерлік бекіту параметрлері негізделген. Геологиялық-құрылымдық талдау, натурлық бақылаулар және есептеулер бойынша табиғи тепе-теңдік күмбезінің биіктігі, анкерлердің ұтымды ұзындығы мен қадамы, сондай-ақ бекітпе деңгейлері арасындағы жүктеменің таралуы анықталды. Күмбез биіктігі 1,3 м-ден асқанда, жарықшақтылық дамыған және әлсіз алевролит-аргиллит қабатшалары болған жағдайда екі деңгейлі анкерлеу қажет. Анкерлердің ұзындығы 2,0–2,6 м, орнату қадамы 0,8–1,2 м. Бұл жүйе қабатаралық жарықтардың ашылуын 32–45%, төбе иілуін 26–38% азайтып, бұзылу ықтималдығын 2,6–3,1 есе төмендетеді. Нәтижелер бекіту паспорттарын әзірлеуге арналған The article substantiates rock-bolt support parameters for development workings in layered and tectonically disturbed rocks of the Karaganda Coal Basin. Geological-structural analysis, fi eld observations, and engineering calculations were used to determine the natural equilibrium arch height, rational bolt length and spacing, and load distribution between support levels. Two-level bolting is required when the arch height exceeds 1.3 m, fracturing is developed, and weak siltstone–mudstone interlayers are present. Rational bolt length is 2.0–2.6 m, with spacing of 0.8–1.2 m. The system reduces interlayer crack opening by 32–45%, roof defl ection by 26–38%, and failure probability by 2.6–3.1 times. The results can be used in support design documentatio
- 4 August 2026
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 7(255),p. 50-55
REMOTE SENSING OF INDUSTRIAL STOCKPILES UNDER SNOW COVER: METHODS AND SCIENTIFIC CHALLENGES
Determining the volumes of stockpiled materials at industrial sites during the winter period is complicated by the presence of snow cover, which distorts surface geometry and reduces calculation accuracy. The aim of the study is to evaluate the effectiveness of remote sensing methods for mine surveying and geodetic support. The research is based on the analysis and comparison of laser scanning, satellite, radar, ground-penetrating radar, and photogrammetric methods. It is established that the integration of UAV-based photogrammetry and GNSS provides the highest efficiency. The scientific novelty lies in assessing the impact of snow cover on digital model accuracy and substantiating an integrated approach to their application Өнеркәсіптік қоймаларда сақталатын материалдардың көлемдерін анықтау қысқы кезеңде қар жамылғысының болуына байланысты күрделене түседі, себебі ол беттердің геометриясын бұрмалап, есептеулердің дәлдігін төмендетеді. Зерттеудің мақсаты -маркшейдерлік-геодезиялық қамтамасыз ету үшін қашықтықтан зондтау әдістерінің тиімділігін бағалау. Лазерлік сканерлеу, спутниктік, радиолокациялық, георадарлық және фотограмметриялық әдістер бойынша деректерді талдау және салыстыру қолданылды. Ең жоғары тиімділікті БПЛА-фотограмметриясы мен ГНСС интеграциясы қамтамасыз ететіні анықталды. Ғылыми жаңалығы қар жамылғысының цифрлық модельдердің дәлдігіне әсерін бағалауда және оларды қолданудың кешенді тәсілін негіздеуде жатыр. Қар қабаты өлшеу нәтижелерінің дәлдігіне әсер ететіні анықталды Определение объемов складируемых материалов на промышленных складах в зимний период осложняется наличием снежного покрова, искажающего геометрию поверхностей и снижающего точность расчетов. Цель исследования – оценка эффективности методов дистанционного зондирования для маркшейдерско-геодезического обеспечения. Применены анализ и сопоставление данных по лазерному сканированию, спутниковым, радиолокационным, георадарным и фотограмметрическим методам. Установлено, что наибольшую эффективность обеспечивает интеграция БПЛА-фотограмметрии и ГНСС. Научная новизна заключается в оценке влияния снежного покрова на точность цифровых моделей и обосновании комплексного подхода к их применению
- 4 August 2026
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 7(255),p. 50-55
REMOTE SENSING OF INDUSTRIAL STOCKPILES UNDER SNOW COVER: METHODS AND SCIENTIFIC CHALLENGES
Determining the volumes of stockpiled materials at industrial sites during the winter period is complicated by the presence of snow cover, which distorts surface geometry and reduces calculation accuracy. The aim of the study is to evaluate the effectiveness of remote sensing methods for mine surveying and geodetic support. The research is based on the analysis and comparison of laser scanning, satellite, radar, ground-penetrating radar, and photogrammetric methods. It is established that the integration of UAV-based photogrammetry and GNSS provides the highest efficiency. The scientific novelty lies in assessing the impact of snow cover on digital model accuracy and substantiating an integrated approach to their application Өнеркәсіптік қоймаларда сақталатын материалдардың көлемдерін анықтау қысқы кезеңде қар жамылғысының болуына байланысты күрделене түседі, себебі ол беттердің геометриясын бұрмалап, есептеулердің дәлдігін төмендетеді. Зерттеудің мақсаты -маркшейдерлік-геодезиялық қамтамасыз ету үшін қашықтықтан зондтау әдістерінің тиімділігін бағалау. Лазерлік сканерлеу, спутниктік, радиолокациялық, георадарлық және фотограмметриялық әдістер бойынша деректерді талдау және салыстыру қолданылды. Ең жоғары тиімділікті БПЛА-фотограмметриясы мен ГНСС интеграциясы қамтамасыз ететіні анықталды. Ғылыми жаңалығы қар жамылғысының цифрлық модельдердің дәлдігіне әсерін бағалауда және оларды қолданудың кешенді тәсілін негіздеуде жатыр. Қар қабаты өлшеу нәтижелерінің дәлдігіне әсер ететіні анықталды Определение объемов складируемых материалов на промышленных складах в зимний период осложняется наличием снежного покрова, искажающего геометрию поверхностей и снижающего точность расчетов. Цель исследования – оценка эффективности методов дистанционного зондирования для маркшейдерско-геодезического обеспечения. Применены анализ и сопоставление данных по лазерному сканированию, спутниковым, радиолокационным, георадарным и фотограмметрическим методам. Установлено, что наибольшую эффективность обеспечивает интеграция БПЛА-фотограмметрии и ГНСС. Научная новизна заключается в оценке влияния снежного покрова на точность цифровых моделей и обосновании комплексного подхода к их применению
- 16 June 2025
- Published by Institute of Metallurgy and Ore Benefication (Publications) in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
- Vol. 338 (3) , 72-80
Study of rock mass structural features based on laser scanning results
Monitoring of pit slopes benches stability and pit walls plays the important role in the safety of mining operations. Slope stability assessment and risk management are mandatory to ensure safe and efficient operation of pits. Laser scanning technology is one of the base methods of geospatial data collecting for building of man-made objects models. Laser scanning is widely used in mining when performing survey work, measurements, monitoring, and studying structural features on the outcroppings of the rock mass. The article describes the technological chain: the collection of geospatial data, the processing of the obtained data with the construction of a terrain model and the further use of the resulting model to solve practical tasks. The choice of optimal laser scanning parameters should be based on the technological features of a pit, the technical characteristics of used equipment and scanning density required to solve the tasks. The article demonstrates the use of the obtained model for determining the necessary geometric parameters of the structural features of the rock mass to conduct kinematic analysis of potential bench failures at the object of study. Based on the results of kinematic analysis, recommendations were developed for further mining operations and potential bench failures risks reducing. The proposed technology can be used and adapted for laser scanning, followed by the construction of a terrain model at various mineral deposits to solve a wide range of tasks and ensure the safety of open-pit mining. Due to the inclusion of laser scanners in the register of measuring instruments in Kazakhstan, high reliability of measurement accuracy is ensured. The technology allows both to obtain generalized data on the sides of the quarry, as well as detailed scans of individual ledges. A significant advantage is the automatic generation of a point cloud during scanning, which reduces in-house processing.
- 16 June 2025
- Published by Institute of Metallurgy and Ore Benefication (Publications) in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
- Vol. 338 (3) , 72-80
Study of rock mass structural features based on laser scanning results
Monitoring of pit slopes benches stability and pit walls plays the important role in the safety of mining operations. Slope stability assessment and risk management are mandatory to ensure safe and efficient operation of pits. Laser scanning technology is one of the base methods of geospatial data collecting for building of man-made objects models. Laser scanning is widely used in mining when performing survey work, measurements, monitoring, and studying structural features on the outcroppings of the rock mass. The article describes the technological chain: the collection of geospatial data, the processing of the obtained data with the construction of a terrain model and the further use of the resulting model to solve practical tasks. The choice of optimal laser scanning parameters should be based on the technological features of a pit, the technical characteristics of used equipment and scanning density required to solve the tasks. The article demonstrates the use of the obtained model for determining the necessary geometric parameters of the structural features of the rock mass to conduct kinematic analysis of potential bench failures at the object of study. Based on the results of kinematic analysis, recommendations were developed for further mining operations and potential bench failures risks reducing. The proposed technology can be used and adapted for laser scanning, followed by the construction of a terrain model at various mineral deposits to solve a wide range of tasks and ensure the safety of open-pit mining. Due to the inclusion of laser scanners in the register of measuring instruments in Kazakhstan, high reliability of measurement accuracy is ensured. The technology allows both to obtain generalized data on the sides of the quarry, as well as detailed scans of individual ledges. A significant advantage is the automatic generation of a point cloud during scanning, which reduces in-house processing.
- 1 January 2025
- Published by Publishing House Minerals Management and Mining Science in Mine Surveying and Subsurface Use
- Vol. 25 (1)
Development of fastening mining workings means based on the stress-strain state of the massif
The article contains the results of research on the development of technology and means of fastening mine workings, taking into account the stress-strain state of the coal rock massif based on digital modeling. Design documentation of rockbolt support has been developed. Bench tests of a batch of pilot-industrial samples in laboratory conditions and pilot-industrial tests of rope and composite rockbolt in mine conditions. Recommendations have been developed on the effective use of the technology of rockbolt support of preparatory workings when conducting tectonic disturbances, increased rock pressure, the influence of cleaning operations, at the junctions and in the lavas of mining sections of mines.
- 1 January 2025
- Published by Publishing House Minerals Management and Mining Science in Mine Surveying and Subsurface Use
- Vol. 25 (1)
Development of fastening mining workings means based on the stress-strain state of the massif
The article contains the results of research on the development of technology and means of fastening mine workings, taking into account the stress-strain state of the coal rock massif based on digital modeling. Design documentation of rockbolt support has been developed. Bench tests of a batch of pilot-industrial samples in laboratory conditions and pilot-industrial tests of rope and composite rockbolt in mine conditions. Recommendations have been developed on the effective use of the technology of rockbolt support of preparatory workings when conducting tectonic disturbances, increased rock pressure, the influence of cleaning operations, at the junctions and in the lavas of mining sections of mines.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 145-150
Monitoring of Open Pit Conditions with Unmanned Aircraft System
The article presents the use of unmanned aircraft systems in an aerial photographic survey of a gold ore deposit. The author's methodology for conducting surveys is described as stepwise. A comparative study of deposit ore zones topographic map created based on instrumental measurements was also carried out, using the aerial photography data-driven digital surface model. This study was conducted at the open pit of TOO GRK Tuz (A mining company in Kazakhstan) and includes the following stages: a topographic survey of the undeveloped area, survey scale 1:1000, a vertical interval of 1.0 m; modeling of geospatial data (point cloud, orthophoto map, digital surface model); comparison of existing topographic plan with digital surface model.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 145-150
Monitoring of Open Pit Conditions with Unmanned Aircraft System
The article presents the use of unmanned aircraft systems in an aerial photographic survey of a gold ore deposit. The author's methodology for conducting surveys is described as stepwise. A comparative study of deposit ore zones topographic map created based on instrumental measurements was also carried out, using the aerial photography data-driven digital surface model. This study was conducted at the open pit of TOO GRK Tuz (A mining company in Kazakhstan) and includes the following stages: a topographic survey of the undeveloped area, survey scale 1:1000, a vertical interval of 1.0 m; modeling of geospatial data (point cloud, orthophoto map, digital surface model); comparison of existing topographic plan with digital surface model.
- 1 January 2024
- Published by Publishing House Minerals Management and Mining Science in Mine Surveying and Subsurface Use
- No. 6,p. 19-24
Breakage face 28 D1-2 geomechanical analysis on «Shakhtinskaya» coal mine
The article panel 28 D1-2 «Shakhtinskaya» coal mine geomechanical analyses. Currently, the installation of equipment has been completed and the breakage face will be launched in September 2024 year. The results of structural modeling of the site were considered. As a result of the analysis, a number of unfavorable factors were identified. The expected working conditions of the facility are characterized as difficult.
- 1 January 2024
- Published by Publishing House Minerals Management and Mining Science in Mine Surveying and Subsurface Use
- No. 6,p. 19-24
Breakage face 28 D1-2 geomechanical analysis on «Shakhtinskaya» coal mine
The article panel 28 D1-2 «Shakhtinskaya» coal mine geomechanical analyses. Currently, the installation of equipment has been completed and the breakage face will be launched in September 2024 year. The results of structural modeling of the site were considered. As a result of the analysis, a number of unfavorable factors were identified. The expected working conditions of the facility are characterized as difficult.