Delin Chu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Delin Chu has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Wei Lu
Institutes of Physical Science and Information Technology, Anhui University , Hefei 230601 , P.R. China
2 shared publications Baoguo Pan
Institute of Applied Physics, Army Officer Academy, Hefei, China
1 shared publication- Desheng Cheng
Foundation Department, PLA Army Academy of Artillery and Air Defense, Hefei 230031, China
1 shared publication - Gui-Zhong Zuo
Chinese Academy of Sciences
1 shared publication - Haifei Deng
Science Island Branch of Graduate School, University of Science and Technology of China, Hefei 230026, China, also with the Institute of Plasma Physics, Hefei Institutes of Physical Sciences, Chinese Academy of Sciences, Hefei 230031, China, and also with the Institute of Applied Physics, Army Officer Academy, Hefei 200031, China
1 shared publication - Haiyan Jiang
School of Electronic Science and Applied Physics, Hefei University of Technology, Hefei 230031, China
1 shared publication
Latest Publications
- Open Access
- 15 February 2024
- Published by Elsevier in Nuclear Materials and Energy
- Vol. 38
Composition design and preparation of lithium lead titanate (Li2PbxTi1-xO3, 0.1 < x < 0.9): A novel tritium breeding ceramic
- 15 February 2024
- Published by Elsevier in Nuclear Materials and Energy
- Vol. 38
Open AccessComposition design and preparation of lithium lead titanate (Li2PbxTi1-xO3, 0.1 < x < 0.9): A novel tritium breeding ceramic
- 5 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 46 (5) , 1546-1550
The Experimental Investigation of Wetting Property for Liquid Lead Bismuth Alloy With ADS Materials
The accelerator-driven subcritical system (ADS) has potential economy and safety and relatively mature technology base, which has been chosen as a priority development advanced nuclear system. Liquid lead bismuth eutectic (LBE) is selected as the spallation target material and core coolant. The reduced activation ferritic/martensitic (RAFM) steel and the silicon carbide composite (SiC f ) are selected as its structural material and functional material, respectively. In the present experimental investigation, the special vacuum experimental device has been built, and the “dispensed droplet” modification of the classic sessile droplet technique has been used to investigate the wetting property and interfacial interactions for LBE/RAFM steel, LBE/316L, LBE/SiC, and LBE/SiCf couples. The contact angles were measured between the liquid LBE and the various candidate materials under working temperature from 300 °C to 480 °C. The results could provide meaningful compatibility database of liquid LBE and valuable engineering design reference of candidate structural materials and functional material for future ADS.
- 5 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 46 (5) , 1546-1550
The Experimental Investigation of Wetting Property for Liquid Lead Bismuth Alloy With ADS Materials
The accelerator-driven subcritical system (ADS) has potential economy and safety and relatively mature technology base, which has been chosen as a priority development advanced nuclear system. Liquid lead bismuth eutectic (LBE) is selected as the spallation target material and core coolant. The reduced activation ferritic/martensitic (RAFM) steel and the silicon carbide composite (SiC f ) are selected as its structural material and functional material, respectively. In the present experimental investigation, the special vacuum experimental device has been built, and the “dispensed droplet” modification of the classic sessile droplet technique has been used to investigate the wetting property and interfacial interactions for LBE/RAFM steel, LBE/316L, LBE/SiC, and LBE/SiCf couples. The contact angles were measured between the liquid LBE and the various candidate materials under working temperature from 300 °C to 480 °C. The results could provide meaningful compatibility database of liquid LBE and valuable engineering design reference of candidate structural materials and functional material for future ADS.
- 9 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 46 (5) , 1372-1376
Preliminary Experimental Study on Hypervapotron Heat Transfer for High Heat Flux Components
A hypervapotron (HV) loop test facility was built to conduct some experiments of heat transfer. Phenomena of HV were observed using the techniques of planar laser-induced fluorescence, high-speed photography, and particle image velocimetry. According to the design of the ITER cooling water system, the fluid flow and condition parameters were utilized: 1) CuCrZr alloy material; 2) triangular and rectangular fin structures; 3) inlet subcooling temperature of 298 K; and 4) rhodamine B solution flow velocity of 0.3-0.5 m/s. It was found that the heat transfer coefficient of the rectangular fin was 1.3-1.5 times higher than that of the triangular fin under the same test conditions. Furthermore, the preliminary mechanism of the heat transfer was explained by the coupling effect of the vortex flow with vapor bubble in the fin pitch, and the heat transfer efficiency was extraordinarily dependent on maintaining the time of vortex formation between the fins.
- 9 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 46 (5) , 1372-1376
Preliminary Experimental Study on Hypervapotron Heat Transfer for High Heat Flux Components
A hypervapotron (HV) loop test facility was built to conduct some experiments of heat transfer. Phenomena of HV were observed using the techniques of planar laser-induced fluorescence, high-speed photography, and particle image velocimetry. According to the design of the ITER cooling water system, the fluid flow and condition parameters were utilized: 1) CuCrZr alloy material; 2) triangular and rectangular fin structures; 3) inlet subcooling temperature of 298 K; and 4) rhodamine B solution flow velocity of 0.3-0.5 m/s. It was found that the heat transfer coefficient of the rectangular fin was 1.3-1.5 times higher than that of the triangular fin under the same test conditions. Furthermore, the preliminary mechanism of the heat transfer was explained by the coupling effect of the vortex flow with vapor bubble in the fin pitch, and the heat transfer efficiency was extraordinarily dependent on maintaining the time of vortex formation between the fins.