Effect of Surface Condition on the Results of Chemical Composition Measurements of Scrap Copper Alloys
Open Access
Abstract
The processing of copper-bearing scrap makes it possible to reduce the costs and energy consumption of obtaining copper alloy products compared to producing them from primary raw materials. To achieve this, it is necessary to quickly and accurately determine the content of alloying elements in individual scrap elements. However, the copper-bearing scrap obtained at secondary raw materials collection points consists of elements with various surface conditions (due to contamination, shape, paint coatings, roughness, etc.). The paper contains research results on the influence of surface roughness and paint coatings on the measurement result of the content of alloying elements in copper-bearing scrap. Three mobile spectrometers were used for measurements: spark-induced optical emission spectroscopy (OES), X-ray fluorescence spectrometry (XRF) and laser-induced breakdown spectroscopy (LIBS). The tests used elements with different surface roughness (from Ra = 0.03 μm to 6.7 μm) and covered with various types of varnish (alkyd, water-based, oil-phthalic, acrylic, oil-alkyd). It was found that the roughness of Ra < 2 μm does not significantly affect the results of the measurements with the OES and LIBS spectrometers, and a larger scatter of measurement results was observed for the XRF spectrometer compared to OES and LIBS. For Ra > 2 μm, a significant impact of roughness was found on the measurement results (this may result in the erroneous classification of the scrap as an incorrect material group). The influence of paint coatings on the measurement is much stronger compared to surface roughness. Even a single layer of paint can cause a change in the measurement result of the content of alloying elements by more than 10%. In the case of an OES spectrometer, paint coatings may prevent the measurement from being performed (which means that no measurement result can be acquired).Keywords
Funding Information
- The Polish National Center for Research and Development (POIR.01.01.01-00-0283/21)
This publication has 15 references indexed in Scilit:
- Examining the influence of copper recycling on prospective resource supply and carbon emission reductionFundamental Research, 2025
- In situ measurements using hand-held XRF spectrometers: a tutorial reviewJournal of Analytical Atomic Spectrometry, 2022
- Laser-Induced Breakdown Spectroscopy in Biological, Forensic and Materials Sciences2022
- Current challenges in copper recycling: aligning insights from material flow analysis with technological research developments and industry issues in Europe and North AmericaResources, Conservation and Recycling, 2021
- LIBS analyses for industrial applications – an overview of developments from 2014 to 2018Journal of Analytical Atomic Spectrometry, 2018
- Calibration curves for commercial copper and aluminum alloys using handheld laser-induced breakdown spectroscopyApplied Physics B, 2018
- Portable XRF on Prehistoric Bronze Artefacts: Limitations and Use for the Detection of Bronze Age Metal WorkshopsOpen Archaeology, 2017
- Laser-Induced Breakdown Spectroscopy2014
- X-ray fluorescence in investigations of cultural relics and archaeological findsApplied Radiation and Isotopes, 2012
- Double laser LIBS and micro-XRF spectroscopy applied to characterize materials coming from the Greek-Roman theater of Taormina2009