Numerical Study on Screening Current Induced Stress of Dry-Wound HTS Racetrack Coil
- 21 November 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Abstract
This study presents a mechanical stress analysis of a dry-wound high-temperature superconducting (HTS) racetrack coil, focusing on the effects of screening current-induced stress (SCS). A three-dimensional (3D) H-formulation was used to simulate the nonlinear current distribution caused by screening current. A modified method was applied to enforce the total current in the cross-section without having to introduce cross-sectional subdivisions separated by highly resistive layers, as required in conventional models. The coil domain was not divided into subdomains, resulting in a more continuous current distribution. The resulting Lorentz force density was used in a 3D mechanical model with turn-to-turn contact conditions to represent the dry-wound racetrack coil. The analysis showed that screening current caused both the typical expansion of the straight sections and additional tilting deformation, increasing the peak stress by 23.6%. Lastly, the three-dimensional analysis results of the racetrack coil SCS were compared with those obtained from a two-dimensional analysis based on the plane stress assumption.Keywords
Funding Information
- National R&D Program through the National Research Foundation of Korea
- Ministry of Science and ICT, South Korea (RS-2022-NR068569)
- National R&D Program through the National Research Foundation of Korea
- Ministry of Science and ICT, South Korea (RS-2022-NR068572)
- Applied Superconductivity Center
- Electric Power Research Institute of Seoul National University
This publication has 22 references indexed in Scilit:
- Screening current induced magnetic field and stress in ultra-high-field magnets using REBCO coated conductorsSuperconductor Science and Technology, 2021
- Screening current rotation effects: SCIF and strain in REBCO magnetsSuperconductor Science and Technology, 2021
- Screening current effect on the stress and strain distribution in REBCO high-field magnets: experimental verification and numerical analysisSuperconductor Science and Technology, 2020
- 38 mm diameter cold bore metal-as-insulation HTS insert reached 32.5 T in a background magnetic field generated by resistive magnetCryogenics, 2020
- Review of the AC loss computation for HTS using H formulationSuperconductor Science and Technology, 2020
- World record 32.35 tesla direct-current magnetic field generated with an all-superconducting magnetSuperconductor Science and Technology, 2020
- Design, construction, and operation of an 18 T 70 mm no-insulation (RE)Ba2Cu3O7−x magnet for an axion haloscope experimentReview of Scientific Instruments, 2020
- 45.5-tesla direct-current magnetic field generated with a high-temperature superconducting magnetNature, 2019
- 26 T 35 mm all-GdBa2Cu3O7–xmulti-width no-insulation superconducting magnetSuperconductor Science and Technology, 2016
- 3D modeling and simulation of 2G HTS stacks and coilsSuperconductor Science and Technology, 2014