Chitin Nanocomposites for Fused Filament Fabrication: Flexible Materials with Enhanced Interlayer Adhesion
Open Access
- 28 June 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (27) , 35554-35565
Abstract
In this work, we present a series of nanocomposites for Fused filament fabrication (FFF) based on polycaprolactone (PCL) and chitin nanocrystals (ChNCs). The ChNCs were synthesized by acid hydrolysis using HCl or lactic acid (LA). The approach using LA, an organic acid, makes the ChNCs synthesis more sustainable and modifies their surface with lactate groups, increasing their compatibility with the PCL matrix. The ChNCs characterization by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy revealed that both ChNCs presented similar morphologies and crystallinity, while differential scanning calorimetry and thermogravimetric analysis proved that they can bear temperatures up to 210 °C without degrading, which allows their processing in the manufacturing of PCL composites by twin-screw extrusion. Therefore, PCL composites in the form of filaments containing 0.5-1.0 wt % ChNCs were produced and used as feedstock in FFF, and standard tensile and flexural specimens were printed at different temperatures, up to 170 °C, to assess the influence of the ChNCs in the mechanical properties of the material. The tensile testing results showed that the presence of ChNCs enhances the strength and ductility of the PCL matrix, increasing the elongation at break around 20-50%. Moreover, the vertically printed flexural specimens showed a very different bending behavior, such that the pure PCL specimens presented a brittle fracture at 7% strain, while the ChNCs composites were able to bend over themselves. Hence, this work proves that the presence of ChNCs aims to improve the interlayer adhesion of the objects manufactured by FFF due to their good adhesive properties, which is currently a concern for the scientific community and the industrial sector.Keywords
Funding Information
- Junta de Andaluc?a (TEP-946)
- Ministerio de Ciencia, Tecnolog?a e Innovaci?n (IJC2019-041128-I)
- Consejer?a de Econom?a, Conocimiento, Empresas y Universidad, Junta de Andaluc?a
- European Social Fund Plus
This publication has 58 references indexed in Scilit:
- Thermal and mechanical characterization of complex electrospun systems based on polycaprolactone and gelatinJournal of Thermal Analysis and Calorimetry, 2022
- Fused deposition modelling: Current status, methodology, applications and future prospectsAdditive Manufacturing, 2021
- Physicochemical Comparison of Chitin Extracted from Horseshoe Crab ( Limulus polyphemus ) Exoskeleton and ExuviaeChemistrySelect, 2020
- Design of a Bio‐Based Device for Micro Total Analysis Combining Fused Deposition Modeling and Layer‐by‐Layer TechnologiesMacromolecular Materials and Engineering, 2020
- Recent Progress on Polymer Materials for Additive ManufacturingAdvanced Functional Materials, 2020
- Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealingAdditive Manufacturing, 2019
- Determination of melt processing conditions for high performance amorphous thermoplastics for large format additive manufacturingAdditive Manufacturing, 2018
- Effects of styrene–acrylonitrile contents on the properties of ABS/SAN blends for fused deposition modelingJournal of Applied Polymer Science, 2016
- Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printingAdditive Manufacturing, 2015
- Alkaline N-deacetylation of chitin enhanced by flash treatments. Reaction kinetics and structure modificationsCarbohydrate Polymers, 1990