Failure mechanisms and damage evolution of geopolymer concrete beams under flexural loading: Experimental investigation and finite element analysis
- 23 May 2026
- journal article
- Published by SAGE Publications in Advances in Structural Engineering
Abstract
This study investigates the failure behavior and damage mechanisms of geopolymer concrete (GPC) and ordinary Portland cement (OPC) reinforced concrete beams through a combined experimental and numerical approach. Flexural tests were conducted, and then displacement and crack development were monitored using high-precision total station measurements. Numerical analyses were performed using ABAQUS, and the consistency between experimental observations and numerical predictions was evaluated at yield and failure stages to characterize inelastic behavior and damage progression. The effects of key parameters, including tensile reinforcement ratio, geopolymer concrete formulations, and curing methods, on cracking behavior, stiffness degradation, and failure modes were investigated in detail. The results indicate that increasing the tensile reinforcement ratio enhances flexural stiffness and load-bearing capacity while reducing ductility at advanced damage stages. Compared to OPC beams, GPC beams exhibited narrower and more distributed crack patterns due to their distinct microstructural characteristics. Quantitatively, GPC beams exhibited approximately 15% greater deformation in the compression zone at failure, while tensile reinforcement strains were up to 23% higher at yield compared to OPC beams. In addition, the maximum crack width at failure in GPC beams was approximately 50% lower than that of OPC beams. These results indicate that, despite similar strength levels, GPC beams exhibit higher deformation capacity and more distributed damage behavior. The findings demonstrate that geopolymer concrete exhibits distinct failure characteristics compared to OPC and should be explicitly considered in structural design to improve damage control and failure prediction. Overall, the study highlights the potential of geopolymer concrete as a reliable and sustainable structural material.Keywords
Funding Information
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (121M236)
This publication has 62 references indexed in Scilit:
- Numerical analysis and experimental comparison of stress and stiffness parameters of steel reinforced geopolymer concrete columnsComposite Structures, 2025
- Structural behavior of geopolymer reinforced concrete beams: experimental, numerical, and code-based assessmentBulletin of Earthquake Engineering, 2025
- Microstructural Analysis of Low-Calcium Fly Ash-Based Geopolymer Concrete with Different Ratios of Activator and Binder Under High TemperaturesArabian Journal for Science and Engineering, 2024
- Experimental modal analysis of fly ash-based geopolymer concrete specimens via modal circles, mode indication functions, and mode shape animationsCement and Concrete Composites, 2023
- Concentrically loaded recycled aggregate geopolymer concrete columns reinforced with GFRP bars and spiralsComposite Structures, 2021
- Experimental study on the effect of matrix on the flexural behavior of beams reinforced with Glass Fiber Reinforced Polymer (GFRP) barsComposite Structures, 2019
- Compressive stress-strain model for low-calcium fly ash-based geopolymer and heat-cured Portland cement concreteCement and Concrete Composites, 2016
- Numerical Simulation of Prestressed Precast Concrete Bridge Deck Panels Using Damage Plasticity ModelInternational Journal of Concrete Structures and Materials, 2014
- An elasto-plastic damage model for reinforced concrete with minimum number of material parametersComputers & Structures, 2004
- A plastic-damage model for concreteInternational Journal of Solids and Structures, 1989