Huseyin Hilmi Aslanbay
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Huseyin Hilmi Aslanbay has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Ahmet Özbayrak
Erciyes üniversitesi Mühendislik Fakültesi
5 shared publications - Hurmet Kucukgoncu
Abdullah Gul University
5 shared publications - Yuksel Gul Aslanbay
Erciyes University
4 shared publications Fatih Altun
Engineering Faculty, Civil Engineering Department, Erciyes University, Kayseri, Turkey
2 shared publicationsOguzhan Atas
1 shared publication- Oguzhan Atas
Alanya Alaaddin Keykubat Üniversitesi Mühendislik Fakültesi
1 shared publication
Latest Publications
- Open Access
- 11 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Nonlinear behavior of fixed-end RC beams with circular openings based on experimental and finite element analysis
Reinforced concrete (RC) beams often require service openings due to architectural and utility demands. However, such openings lead to stress concentrations caused by the reduction in the concrete cross-section and the absence of transverse reinforcement, which can adversely affect the structural performance of beams and lead to premature failures. Despite extensive research on RC beams with openings, most studies have been conducted under simply supported conditions, which do not accurately represent real structural behavior. This study aims to investigate the structural behavior of RC beams with circular mid-span openings under fixed-end (encastre) boundary conditions through both experimental testing and numerical analysis. Openings were introduced in the bending region at 20%, 40%, and 60% of the beam height. Full-scale beam specimens were tested under four-point bending, and detailed nonlinear finite element models were developed using ABAQUS software. The results show that openings exceeding 40% of the beam height significantly reduce ductility and lead to sudden load drops. Additionally, when openings exceed 20%, the remaining concrete section around the opening plays a critical role in load transfer and bond performance. The numerical results exhibit strong agreement with the experimental findings, demonstrating that the proposed modeling approach can reliably capture the structural behavior of beams with openings. The findings provide important insights into the realistic behavior of fixed-end RC beams and contribute to the safe and efficient design of structural members with service openings.
- 11 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessNonlinear behavior of fixed-end RC beams with circular openings based on experimental and finite element analysis
Reinforced concrete (RC) beams often require service openings due to architectural and utility demands. However, such openings lead to stress concentrations caused by the reduction in the concrete cross-section and the absence of transverse reinforcement, which can adversely affect the structural performance of beams and lead to premature failures. Despite extensive research on RC beams with openings, most studies have been conducted under simply supported conditions, which do not accurately represent real structural behavior. This study aims to investigate the structural behavior of RC beams with circular mid-span openings under fixed-end (encastre) boundary conditions through both experimental testing and numerical analysis. Openings were introduced in the bending region at 20%, 40%, and 60% of the beam height. Full-scale beam specimens were tested under four-point bending, and detailed nonlinear finite element models were developed using ABAQUS software. The results show that openings exceeding 40% of the beam height significantly reduce ductility and lead to sudden load drops. Additionally, when openings exceed 20%, the remaining concrete section around the opening plays a critical role in load transfer and bond performance. The numerical results exhibit strong agreement with the experimental findings, demonstrating that the proposed modeling approach can reliably capture the structural behavior of beams with openings. The findings provide important insights into the realistic behavior of fixed-end RC beams and contribute to the safe and efficient design of structural members with service openings.
- 23 May 2026
- Published by SAGE Publications in Advances in Structural Engineering
Failure mechanisms and damage evolution of geopolymer concrete beams under flexural loading: Experimental investigation and finite element analysis
This study investigates the failure behavior and damage mechanisms of geopolymer concrete (GPC) and ordinary Portland cement (OPC) reinforced concrete beams through a combined experimental and numerical approach. Flexural tests were conducted, and then displacement and crack development were monitored using high-precision total station measurements. Numerical analyses were performed using ABAQUS, and the consistency between experimental observations and numerical predictions was evaluated at yield and failure stages to characterize inelastic behavior and damage progression. The effects of key parameters, including tensile reinforcement ratio, geopolymer concrete formulations, and curing methods, on cracking behavior, stiffness degradation, and failure modes were investigated in detail. The results indicate that increasing the tensile reinforcement ratio enhances flexural stiffness and load-bearing capacity while reducing ductility at advanced damage stages. Compared to OPC beams, GPC beams exhibited narrower and more distributed crack patterns due to their distinct microstructural characteristics. Quantitatively, GPC beams exhibited approximately 15% greater deformation in the compression zone at failure, while tensile reinforcement strains were up to 23% higher at yield compared to OPC beams. In addition, the maximum crack width at failure in GPC beams was approximately 50% lower than that of OPC beams. These results indicate that, despite similar strength levels, GPC beams exhibit higher deformation capacity and more distributed damage behavior. The findings demonstrate that geopolymer concrete exhibits distinct failure characteristics compared to OPC and should be explicitly considered in structural design to improve damage control and failure prediction. Overall, the study highlights the potential of geopolymer concrete as a reliable and sustainable structural material.
- 23 May 2026
- Published by SAGE Publications in Advances in Structural Engineering
Failure mechanisms and damage evolution of geopolymer concrete beams under flexural loading: Experimental investigation and finite element analysis
This study investigates the failure behavior and damage mechanisms of geopolymer concrete (GPC) and ordinary Portland cement (OPC) reinforced concrete beams through a combined experimental and numerical approach. Flexural tests were conducted, and then displacement and crack development were monitored using high-precision total station measurements. Numerical analyses were performed using ABAQUS, and the consistency between experimental observations and numerical predictions was evaluated at yield and failure stages to characterize inelastic behavior and damage progression. The effects of key parameters, including tensile reinforcement ratio, geopolymer concrete formulations, and curing methods, on cracking behavior, stiffness degradation, and failure modes were investigated in detail. The results indicate that increasing the tensile reinforcement ratio enhances flexural stiffness and load-bearing capacity while reducing ductility at advanced damage stages. Compared to OPC beams, GPC beams exhibited narrower and more distributed crack patterns due to their distinct microstructural characteristics. Quantitatively, GPC beams exhibited approximately 15% greater deformation in the compression zone at failure, while tensile reinforcement strains were up to 23% higher at yield compared to OPC beams. In addition, the maximum crack width at failure in GPC beams was approximately 50% lower than that of OPC beams. These results indicate that, despite similar strength levels, GPC beams exhibit higher deformation capacity and more distributed damage behavior. The findings demonstrate that geopolymer concrete exhibits distinct failure characteristics compared to OPC and should be explicitly considered in structural design to improve damage control and failure prediction. Overall, the study highlights the potential of geopolymer concrete as a reliable and sustainable structural material.
- 29 May 2023
- Published by Omer Halisdemir Universitesi in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
Merkezi Ters V ve X Çaprazlı Çerçeveli Yüksek Katlı Çelik Yapıların Mod Birleştirme Yöntemi ile Yapısal Analiz Sonuçlarının Karşılaştırılması
Çalışma kapsamında, yüksek katlı çelik yapılarda yapı planının çekirdek bölümünde ve planın dış açıklıklarında ters V çaprazların veya X çaprazların kullanılmasının yapının performansı üzerindeki etkileri incelenmiştir. TBDY-2018 ve ÇYTHYE-2018 dikkate alınarak Etabs programı kullanılarak moedellenen 35 katlı çelik yapı modelinde 4 farklı tipte yapı modellenerek ters V ve X çaprazların farklı konumlandırılmasının etkisi incelenmiştir. Yapısal davranış mod birleştirme yöntemi kullanılarak analiz edilmiştir. Yapısal analiz sonucunda farklı tip bina modelleri ağırlıkları, periyotları ve yer değiştirme değerleri üzerinden karşılaştırılmıştır. Çaprazların çekirdek bölümünde modellenmesi çaprazları çevreleyen kolonlarda eksenel kuvvette zorlanmaya sebebiyet verdiğinden yapı ağırlıkları dış açıklardaki çapraz modellerine kıyasla daha fazladır. Çekirdek bölümündeki çaprazları çevreleyen kolon profilleri büyütülmüştür. Bu değişiklik diğer modellere kıyasla %40-50 oranında yapı ağırlığında artışa sebebiyet vermiştir. Çalışma kapsamında çapraz profil değişiminin analiz sonuçlarına etkisi az iken çaprazların konumunun analiz sonuçlarına büyük etkisi mevcuttur. Çaprazların çekirdekte konumlandığı modeller için ters V çaprazlı model X çaprazlı modele kıyasla %4.9 oranında daha fazla deplasman gerçekleştirmiştir. Çaprazların dış açıklıklarda konumlandığı modeller için X çaprazlı model ters V çaprazlı modele kıyasla %0.57 oranında daha fazla yatay deplasman gerçekleştirmiştir.
- 29 May 2023
- Published by Omer Halisdemir Universitesi in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
Merkezi Ters V ve X Çaprazlı Çerçeveli Yüksek Katlı Çelik Yapıların Mod Birleştirme Yöntemi ile Yapısal Analiz Sonuçlarının Karşılaştırılması
Çalışma kapsamında, yüksek katlı çelik yapılarda yapı planının çekirdek bölümünde ve planın dış açıklıklarında ters V çaprazların veya X çaprazların kullanılmasının yapının performansı üzerindeki etkileri incelenmiştir. TBDY-2018 ve ÇYTHYE-2018 dikkate alınarak Etabs programı kullanılarak moedellenen 35 katlı çelik yapı modelinde 4 farklı tipte yapı modellenerek ters V ve X çaprazların farklı konumlandırılmasının etkisi incelenmiştir. Yapısal davranış mod birleştirme yöntemi kullanılarak analiz edilmiştir. Yapısal analiz sonucunda farklı tip bina modelleri ağırlıkları, periyotları ve yer değiştirme değerleri üzerinden karşılaştırılmıştır. Çaprazların çekirdek bölümünde modellenmesi çaprazları çevreleyen kolonlarda eksenel kuvvette zorlanmaya sebebiyet verdiğinden yapı ağırlıkları dış açıklardaki çapraz modellerine kıyasla daha fazladır. Çekirdek bölümündeki çaprazları çevreleyen kolon profilleri büyütülmüştür. Bu değişiklik diğer modellere kıyasla %40-50 oranında yapı ağırlığında artışa sebebiyet vermiştir. Çalışma kapsamında çapraz profil değişiminin analiz sonuçlarına etkisi az iken çaprazların konumunun analiz sonuçlarına büyük etkisi mevcuttur. Çaprazların çekirdekte konumlandığı modeller için ters V çaprazlı model X çaprazlı modele kıyasla %4.9 oranında daha fazla deplasman gerçekleştirmiştir. Çaprazların dış açıklıklarda konumlandığı modeller için X çaprazlı model ters V çaprazlı modele kıyasla %0.57 oranında daha fazla yatay deplasman gerçekleştirmiştir.