Design and Verification of Ladder Sleepers Suitable for Rail Joints in Ballasted Tracks
Open Access
- 12 January 2026
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 16 (2) , 769
Abstract
Ladder sleepers were originally developed to reduce maintenance requirements in ballasted tracks by improving load distribution along the rail direction. In Japan, their design generally follows the method used for prestressed concrete sleepers, where dynamic and impact effects induced by train passage are accounted for using an impact factor. However, the impact factor and the length of the unsupported section—which compensates for ballast settlement over time—have not been sufficiently verified for ladder sleeper applications at rail joints, where the load environment is more severe. In this study, ladder sleepers designed following the criteria for general track sections were installed at rail joints in an operating ballasted track. Field measurements of bending moments under train passage were collected over 13 months, and numerical analyses were performed to evaluate the applicability of key design parameters. The impact factor at rail joints remained within a range comparable to that of general sections, confirming that a value of 2 is appropriate. In contrast, the unsupported section tended to extend over time and should be set to ~1.5 times the conventional design length. Accordingly, new ladder sleeper structures suitable for the load environment at rail joints were designed.Keywords
This publication has 17 references indexed in Scilit:
- Actual Condition Survey of the Effects of Aging and Accumulated Tonnage on the Load-bearing Capacity of PC SleepersQuarterly Report of RTRI, 2024
- Validation of a dynamic wheel load factor and the influence of various track irregularities on the dynamic response of prestressed concrete sleepersProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2019
- Review of the lateral resistance of ballasted tracksProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2019
- An experimental study of vibration reduction of a ballasted ladder trackProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2016
- Simulation of a Shinkansen train on the railway structure during an earthquakeJapan Journal of Industrial and Applied Mathematics, 2011
- An experimental study of train-induced structural and environmental vibrations of a rail transit elevated bridge with ladder tracksProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2010
- Estimation of Structure-Borne Noise Reduction Effect of Steel Railway Bridge Equipped with Floating Ladder Track and Floating Reinforced-Concrete DeckJournal of Mechanical Systems for Transportation and Logistics, 2010
- Development of Ballasted Ladder Track Equipped with a Vehicle Guide DeviceQuarterly Report of RTRI, 2009
- Simulation and visualization of a high-speed Shinkansen train on the railway structureJapan Journal of Industrial and Applied Mathematics, 2000
- A STUDY ON LIMIT STATE DESIGN METHOD FOR PRESTRESSED CONCRETE SLEEPERSDoboku Gakkai Ronbunshu, 1997