Structural Analysis of Sinter Packed-bed during Softening and Melting Processes Using X-ray CT
Open Access
- 30 May 2025
- journal article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 65 (6) , 817-824
Abstract
In this study, changes in structure of sinter packed-bed during softening and melting processes were analyzed, and gas permeability of the cohesive layer was evaluated using X-ray CT images. First, the void structure of sinter packed-bed during softening and melting processes was visualized by X-ray CT images. In the softening process, the reducing gas flowed through the void between the sinter particles. In contrast, the reducing gas flowed through the generated melt phase in the melting process. Next, the changes in porosity and apparent particle diameter due to shrinkage of sinter layer were analyzed using CT images to evaluate the structural changes of sinter packed-bed during softening process. The porosity decreased with increasing the shrinkage of the sinter layer. In addition, the porosity tended to be smaller in the upper layer. The apparent particle diameter increased with increasing the shrinkage of the sinter layer. This is attributed to the deformation and the fusion of the sinter particles. Finally, the pressure drop of the sinter layer was calculated based on the Ergun equation using the porosity and the apparent particle diameter obtained from the CT images. As a result, the change in pressure drop was able to be well expressed up to a shrinkage degree of 0.5. The pressure drop was higher in the upper part of the sinter layer, suggesting that the pressure drop could be reduced by suppressing local blockage of the packed-bed.Keywords
This publication has 15 references indexed in Scilit:
- Influence of Large Amount of Hydrogen Containing Gaseous Reductant Injection on Carbon Consumption and Operation Conditions of Blast Furnace - Development of Low Carbon Blast Furnace Operation Technology by using Experimental Blast Furnace: part II -ISIJ International, 2022
- Formulation of Shrinkage Rate of Sinter during Softening ProcessISIJ International, 2020
- Gas Permeability Evaluation of Granulated Slag Particles Packed Bed during Softening and Melting Stage with Fanning’s EquationISIJ International, 2020
- Pressure-drop Modelling in the Softening and Melting Test for Ferrous BurdenISIJ International, 2020
- A Novel Measurement of Voidage in Coke and Ferrous Layers in Softening and Melting under Load Test Using Synchrotron X-ray and Neutron Computed TomographyISIJ International, 2018
- Effect of Ore Layer Thickness on Reduction Degree and Gas Permeability in High Temperature Properties TestTetsu-to-Hagane, 2016
- Quantitative Estimation of Gas Permeability of Softening Sinter Layer with Liquid PhaseTetsu-to-Hagane, 2014
- Effect of Coke Reactivity on Sinter Softening-melting Property by Simultaneous Evaluation Method of Carbonaceous and Ferrous Burdens in Blast FurnaceISIJ International, 2011
- Investigation of Reactions and Alkali Circulation in the Blast Furnace Stack by the Use of Vertical ProbesTetsu-to-Hagane, 1976
- The Shrinkage of Burden Materials and Pressure Drop of Gas in Softening and Fusing Zones of Blast FurnaceTetsu-to-Hagane, 1975