A 0.3–1.2 V Schottky-Based CMOS ZTC Voltage Reference
- 31 July 2019
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 66 (10) , 1663-1667
Abstract
A voltage reference based on MOSFETs operated under Zero Temperature Coefficient (ZTC) bias is proposed. The circuit operates in a power supply voltage range from 0.3V up to 1.2V and outputs three different reference voltages using Standard-VT (SVT), Low-VT (LVT), and Zero-VT (ZVT) MOS transistors biased near their ZTC point by a single PTAT current reference. Measurements on 15 circuit samples fabricated in a standard 0.13-μm CMOS process show a worst-case normalized standard deviation (σ/μ) of 3% (SVT), 5.1% (LVT) and 10.8% (ZVT) respectively with a 75% of confidence level. At the nominal supply voltage of 0.45 V, the measured effective temperature coefficients (TCeff) range from 140 to 200 ppm/∘C over the full commercial temperature range. At room temperature (25∘C), line sensitivity in the ZVT VR is just 1.3%/100mV, over the whole supply range. The proposed reference draws around 5 μW and occupies 0.014 mm2 of silicon area.Keywords
Funding Information
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
This publication has 26 references indexed in Scilit:
- A 114-pW PMOS-only, trim-free voltage reference with 0.26% within-wafer inaccuracy for nW systems2016
- 0.5 V Supply Voltage Reference Based on the MOSFET ZTC Condition2015
- A Sub- ${\boldsymbol kT}/\boldsymbol q$ Voltage Reference Operating at 150 mVIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2014
- Measuring a Small Number of Samples, and the 3v Fallacy: Shedding Light on Confidence and Error IntervalsIEEE Solid-State Circuits Magazine, 2014
- Sub-1 V band-gap based and MOS threshold-voltage based voltage references in 0.13 µm CMOSAnalog Integrated Circuits and Signal Processing, 2014
- A CMOS Subbandgap Reference Circuit With 1-V Power Supply VoltageIEEE Journal of Solid-State Circuits, 2004
- Op-amps and startup circuits for CMOS bandgap references with near 1-V supplyIEEE Journal of Solid-State Circuits, 2002
- A sub-1-V 15-ppm/°C CMOS bandgap voltage reference without requiring low threshold voltage deviceIEEE Journal of Solid-State Circuits, 2002
- Mutual compensation of mobility and threshold voltage temperature effects with applications in CMOS circuitsIEEE Transactions on Circuits and Systems I: Regular Papers, 2001
- A CMOS bandgap reference circuit with sub-1-V operationIEEE Journal of Solid-State Circuits, 1999