Hamilton Klimach
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hamilton Klimach has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Sergio Bampi
Graduate Program in Microelectronics (PGMICRO), Universidade Federal do Rio Grande do Sul, Porto Alegre, Brazil
13 shared publications - Pedro Toledo
Department of Electronics and Telecommunications (DET), Politecnico di Torino, Torino, Italy
7 shared publications - David Cordova
IMS Laboratory, Université de Bordeaux, Bordeaux, France
5 shared publications - Eric Fabris
Research and Development, CEITECS. A., Porto Alegre, Brazil
5 shared publications - Paolo Stefano Crovetti
Politecnico di Torino
4 shared publications - Bruno Canal
Federal University of Rio Grande do Sul - UFRGS,PGMicro - Graduate Program in Microelectronics,Porto Alegre,RS,Brazil
2 shared publications
Latest Publications
- Open Access
- 1 June 2026
- Published by Universidade Federal de Santa Maria in InterAção
- Vol. 17 (2) , e96065
Reorientação produtiva do Centro Nacional de Tecnologia Eletrônica Avançada (CEITEC): perspectivas estratégicas para a indústria brasileira de microeletrônica
As inovações tecnológicas apresentaram, historicamente, papel central nas relações de poder no Sistema Internacional, haja vista que são responsáveis por reorganizar as dinâmicas produtivas em escala global. Dessa forma, este estudo tem como objetivo compreender o projeto brasileiro de inserção na indústria de microeletrônica, com ênfase no Centro Nacional de Tecnologia Eletrônica Avançada (CEITEC), empresa estatal reativada em 2023, e seu papel estratégico de inserção brasileira nas novas dinâmicas econômicas. Com base na teoria do sistema-mundo em diálogo com o conceito de centro de decisão energético, busca-se responder a pergunta: “Qual a importância estratégica da CEITEC e de seu projeto de endogeneização da tecnologia de carbeto de silício para a inserção brasileira na cadeia produtiva de semicondutores?”. Defende-se, assim, que a reorientação produtiva vai ao encontro dos novos desafios impostos pelas grandes transições globais. São elas a difusão de novas tecnologias militares, as mudanças climáticas e a quarta revolução industrial, impulsionando o crescimento da demanda energética. Ademais, as parcerias internacionais, com destaque a Coreia do Sul, Malásia, China e Singapura, apresentam uma janela de oportunidade de adentrar na vanguarda do mercado, enquanto a transição para um mercado de nicho propicia competitividade. Em resumo, o novo projeto, apesar de não sanar a dependência em chips de silício, apresenta-se como mais realista e viável para o Brasil.
- 1 June 2026
- Published by Universidade Federal de Santa Maria in InterAção
- Vol. 17 (2) , e96065
Open AccessReorientação produtiva do Centro Nacional de Tecnologia Eletrônica Avançada (CEITEC): perspectivas estratégicas para a indústria brasileira de microeletrônica
As inovações tecnológicas apresentaram, historicamente, papel central nas relações de poder no Sistema Internacional, haja vista que são responsáveis por reorganizar as dinâmicas produtivas em escala global. Dessa forma, este estudo tem como objetivo compreender o projeto brasileiro de inserção na indústria de microeletrônica, com ênfase no Centro Nacional de Tecnologia Eletrônica Avançada (CEITEC), empresa estatal reativada em 2023, e seu papel estratégico de inserção brasileira nas novas dinâmicas econômicas. Com base na teoria do sistema-mundo em diálogo com o conceito de centro de decisão energético, busca-se responder a pergunta: “Qual a importância estratégica da CEITEC e de seu projeto de endogeneização da tecnologia de carbeto de silício para a inserção brasileira na cadeia produtiva de semicondutores?”. Defende-se, assim, que a reorientação produtiva vai ao encontro dos novos desafios impostos pelas grandes transições globais. São elas a difusão de novas tecnologias militares, as mudanças climáticas e a quarta revolução industrial, impulsionando o crescimento da demanda energética. Ademais, as parcerias internacionais, com destaque a Coreia do Sul, Malásia, China e Singapura, apresentam uma janela de oportunidade de adentrar na vanguarda do mercado, enquanto a transição para um mercado de nicho propicia competitividade. Em resumo, o novo projeto, apesar de não sanar a dependência em chips de silício, apresenta-se como mais realista e viável para o Brasil.
- Open Access
- 5 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 189959-189978
Revisiting ZTC and GZTC in CMOS FinFET Using a Five-DC-Parameter MOSFET Model
This paper meticulously revisits the derivation of the MOSFET Zero Temperature Coefficient (ZTC) and the Transconductance Zero Temperature Coefficient (GZTC) conditions, with a focus on a Design-oriented five DC-parameter MOSFET model, which is an extremely useful tool for handling calculations in IC Design Field. This work proposes the incorporation of two short channel effects in the ZTC and GZTC modeling—namely, the Drain Induced Barrier Lowering (DIBL) effect, denoted as σ, and the velocity saturation effect, represented by ζ—enhancing the traditional three DC-parameter model, which includes the slope factor n, the threshold voltage VT, and the specific current IS. In addition, for the first time, this paper proposes a more comprehensive general closed expression for the ZTC and GZTC points in both triode and saturation regimes, leveraging the Lambert function W0(x). By employing the derived expressions for each phenomenon, the ZTC and GZTC dependence concerning each physical parameter is thoroughly investigated. Furthermore, these theoretical findings are compared with simulated data obtained from a mature 16nm FinFET Process Design Kit (PDK). The results demonstrate that the integration of σ and ζ into the ZTC and GZTC calculations yields a significant improvement in accuracy, reducing the error between the simulation and the model values from 8% to less than 2%. This enhancement underscores the importance of considering additional effects when analyzing temperature coefficients in MOSFETs, thus providing valuable insights for professionals engaged in advanced IC design.
- 5 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 189959-189978
Open AccessRevisiting ZTC and GZTC in CMOS FinFET Using a Five-DC-Parameter MOSFET Model
This paper meticulously revisits the derivation of the MOSFET Zero Temperature Coefficient (ZTC) and the Transconductance Zero Temperature Coefficient (GZTC) conditions, with a focus on a Design-oriented five DC-parameter MOSFET model, which is an extremely useful tool for handling calculations in IC Design Field. This work proposes the incorporation of two short channel effects in the ZTC and GZTC modeling—namely, the Drain Induced Barrier Lowering (DIBL) effect, denoted as σ, and the velocity saturation effect, represented by ζ—enhancing the traditional three DC-parameter model, which includes the slope factor n, the threshold voltage VT, and the specific current IS. In addition, for the first time, this paper proposes a more comprehensive general closed expression for the ZTC and GZTC points in both triode and saturation regimes, leveraging the Lambert function W0(x). By employing the derived expressions for each phenomenon, the ZTC and GZTC dependence concerning each physical parameter is thoroughly investigated. Furthermore, these theoretical findings are compared with simulated data obtained from a mature 16nm FinFET Process Design Kit (PDK). The results demonstrate that the integration of σ and ζ into the ZTC and GZTC calculations yields a significant improvement in accuracy, reducing the error between the simulation and the model values from 8% to less than 2%. This enhancement underscores the importance of considering additional effects when analyzing temperature coefficients in MOSFETs, thus providing valuable insights for professionals engaged in advanced IC design.
- 22 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Time Assisted SAR ADC with Bit-guess and Digital Error Correction
This work presents an original SAR ADC architecture for low-power ADC applications. The proposed architecture uses a Time-to-Digital converter (TDC) to apply a window switching scheme in the SAR algorithm that predicts the switching value of the three MSB CDAC capacitors in just one SAR cycle. The switching scheme also implements a correlated-reversed switching (CRS), improving the converter linearity. The proposed archi-tecture is demonstrated on a 10-bit SAR ADC implementation, which takes ten SAR cycles to provide a l2-bit word to a digital error correction (DEC) block that translates it into a final 10-bit digital output. Considering a Gaussian random distribution to model the variability of unit capacitances, MATLAB simulations demonstrate an ADC linearity that achieves 52% of DNL and 69% of INL values of a conventional VCM-based switching method. The switching scheme reduces by 50% the average switching energy compared with the conventional VCM-based switching method, considering a design with the redundancy searching range of the implemented CDAC. The proposed SAR ADC architecture is designed and simulated in a 28nm CMOS technology. The proposed architecture, working with a 600mV power supply with 10MHz sample frequency, demonstrates an improvement of 28% in the ADC power dissipation compared with a 10-bit SAR ADC with traditional implementation designed to have the same linearity.
- 22 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Time Assisted SAR ADC with Bit-guess and Digital Error Correction
This work presents an original SAR ADC architecture for low-power ADC applications. The proposed architecture uses a Time-to-Digital converter (TDC) to apply a window switching scheme in the SAR algorithm that predicts the switching value of the three MSB CDAC capacitors in just one SAR cycle. The switching scheme also implements a correlated-reversed switching (CRS), improving the converter linearity. The proposed archi-tecture is demonstrated on a 10-bit SAR ADC implementation, which takes ten SAR cycles to provide a l2-bit word to a digital error correction (DEC) block that translates it into a final 10-bit digital output. Considering a Gaussian random distribution to model the variability of unit capacitances, MATLAB simulations demonstrate an ADC linearity that achieves 52% of DNL and 69% of INL values of a conventional VCM-based switching method. The switching scheme reduces by 50% the average switching energy compared with the conventional VCM-based switching method, considering a design with the redundancy searching range of the implemented CDAC. The proposed SAR ADC architecture is designed and simulated in a 28nm CMOS technology. The proposed architecture, working with a 600mV power supply with 10MHz sample frequency, demonstrates an improvement of 28% in the ADC power dissipation compared with a 10-bit SAR ADC with traditional implementation designed to have the same linearity.
- Open Access
- 18 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 44106-44115
Low-Voltage, Low-Area, nW-Power CMOS Digital-Based Biosignal Amplifier
This paper presents the operation principle and the silicon characterization of a power efficient ultra-low voltage and ultra-low area fully-differential, digital-based Operational Transconductance Amplifier (OTA), suitable for microscale biosensing applications (BioDIGOTA). Measured results in 180nm CMOS prototypes show that the proposed BioDIGOTA is able to work with a supply voltage down to 400 mV, consuming only 95 nW. Owing to its intrinsically highly-digital feature, the BioDIGOTA layout occupies only 0.022 mm 2 of total silicon area, lowering the area by$3.22\times $ times compared to the current state of the art, while keeping reasonable system performance, such as 7.6 NEF with$1.25~\mu V_{\mathrm {RMS}}$ input referred noise over a 10 Hz bandwidth, 1.8% of THD, 62 dB of CMRR and 55 dB of PSRR.- 18 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 44106-44115
Open AccessLow-Voltage, Low-Area, nW-Power CMOS Digital-Based Biosignal Amplifier
This paper presents the operation principle and the silicon characterization of a power efficient ultra-low voltage and ultra-low area fully-differential, digital-based Operational Transconductance Amplifier (OTA), suitable for microscale biosensing applications (BioDIGOTA). Measured results in 180nm CMOS prototypes show that the proposed BioDIGOTA is able to work with a supply voltage down to 400 mV, consuming only 95 nW. Owing to its intrinsically highly-digital feature, the BioDIGOTA layout occupies only 0.022 mm 2 of total silicon area, lowering the area by$3.22\times $ times compared to the current state of the art, while keeping reasonable system performance, such as 7.6 NEF with$1.25~\mu V_{\mathrm {RMS}}$ input referred noise over a 10 Hz bandwidth, 1.8% of THD, 62 dB of CMRR and 55 dB of PSRR. - 11 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 5 (4) , 387-396
Two-Feedback Loop Shunt Regulator Based on PWM RF Power Detector Aiming RFID Applications
The paper presents a novel shunt voltage regulation architecture that uses an RF power detector, based on Pulse Width Modulation (PWM) technique, aiming at magnetic coupled Radio-Frequency Identification (RFID) transponders. The proposed regulator architecture implements two feedback loops: a voltage clamping circuit that composes a fast correction loop and a slow but accurate power detector loop. The first clamping loop guarantees fast over-voltage protection, mainly in high RF power condition (short reading distance), but degrades power efficiency when in low power condition (large reading distance). The second loop corrects the imprecision of the first loop according to the detected RF input power. Therefore, it increases power efficiency and reading distance when in low RF power condition. The RF power detector architecture, based on a PWM technique, and the shunt regulator design are presented and discussed in detail. RFID power regulation issues are also discussed, followed by a brief review of RF power detector circuits. The complete regulator architecture was implemented in a 180nm CMOS low cost process and prototyped as part of a commercial low-frequency (134 kHz) RFID transponder. The complete transponder area is 870$\times $ 870$\mu \text{m}^{2}$ , being 130$\times $ 230$\mu \text{m}^{2}$ related to the regulator circuit only. Both resonant and supply capacitors are implemented on chip. The analog and digital functional blocks of the RFID system consume 4.5$\mu \text{W}$ . Performance of the transponder is measured with the shunt regulator enabled and compared with the power limiting approach using only clamping diodes. Measured results show an improvement of 16.7% in the maximum communication distance between the transponder and the reader because of the proposed regulation strategy.- 11 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 5 (4) , 387-396
Two-Feedback Loop Shunt Regulator Based on PWM RF Power Detector Aiming RFID Applications
The paper presents a novel shunt voltage regulation architecture that uses an RF power detector, based on Pulse Width Modulation (PWM) technique, aiming at magnetic coupled Radio-Frequency Identification (RFID) transponders. The proposed regulator architecture implements two feedback loops: a voltage clamping circuit that composes a fast correction loop and a slow but accurate power detector loop. The first clamping loop guarantees fast over-voltage protection, mainly in high RF power condition (short reading distance), but degrades power efficiency when in low power condition (large reading distance). The second loop corrects the imprecision of the first loop according to the detected RF input power. Therefore, it increases power efficiency and reading distance when in low RF power condition. The RF power detector architecture, based on a PWM technique, and the shunt regulator design are presented and discussed in detail. RFID power regulation issues are also discussed, followed by a brief review of RF power detector circuits. The complete regulator architecture was implemented in a 180nm CMOS low cost process and prototyped as part of a commercial low-frequency (134 kHz) RFID transponder. The complete transponder area is 870$\times $ 870$\mu \text{m}^{2}$ , being 130$\times $ 230$\mu \text{m}^{2}$ related to the regulator circuit only. Both resonant and supply capacitors are implemented on chip. The analog and digital functional blocks of the RFID system consume 4.5$\mu \text{W}$ . Performance of the transponder is measured with the shunt regulator enabled and compared with the power limiting approach using only clamping diodes. Measured results show an improvement of 16.7% in the maximum communication distance between the transponder and the reader because of the proposed regulation strategy.- 9 June 2021
- Published by Springer Nature in Analog Integrated Circuits and Signal Processing
- Vol. 108 (3) , 511-524
Low-voltage dynamic comparator using positive feedback bulk effect on a floating inverter amplifier
- 9 June 2021
- Published by Springer Nature in Analog Integrated Circuits and Signal Processing
- Vol. 108 (3) , 511-524
Low-voltage dynamic comparator using positive feedback bulk effect on a floating inverter amplifier
- 27 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (9) , 3073-3077
A 300mV-Supply, Sub-nW-Power Digital-Based Operational Transconductance Amplifier
An ultra-low voltage and ultra-low power Digital-Based Operational Transconductance Amplifier (DB-OTA) is presented and demonstrated on silicon in 180 nm CMOS. The DB-OTA is designed using digital standard cells, hence benefitting from technology scaling as much as digital circuits, while also being technology- and design-portable, and requiring minimal design and integration effort compared to conventional analog-intensive OTAs. The fabricated DB-OTA testchip occupies a compact area of 1,426 μm 2 , operates at supply voltages down to 300 mV, and consumes only 590 pW while driving a capacitive load of 80pF. Its measured Total Harmonic Distortion (THD) is lower than 5% at a 100-mV input signal swing. Based on these results, the proposed DB-OTA achieves 2,101 V -1 small-signal figure of merit (FOM S ) and 1,070 large-signal figure of merit (FOM L ). To the best of the authors' knowledge, the power is the lowest reported to date in an OTA, and the achieved figures of merit are the best in sub-500 mV OTAs reported to date. The low cost, the low design effort and the high power efficiency of DB-OTA make it well suited for purely harvested low-frequency analog interfaces in sensor nodes.
- 27 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (9) , 3073-3077
A 300mV-Supply, Sub-nW-Power Digital-Based Operational Transconductance Amplifier
An ultra-low voltage and ultra-low power Digital-Based Operational Transconductance Amplifier (DB-OTA) is presented and demonstrated on silicon in 180 nm CMOS. The DB-OTA is designed using digital standard cells, hence benefitting from technology scaling as much as digital circuits, while also being technology- and design-portable, and requiring minimal design and integration effort compared to conventional analog-intensive OTAs. The fabricated DB-OTA testchip occupies a compact area of 1,426 μm 2 , operates at supply voltages down to 300 mV, and consumes only 590 pW while driving a capacitive load of 80pF. Its measured Total Harmonic Distortion (THD) is lower than 5% at a 100-mV input signal swing. Based on these results, the proposed DB-OTA achieves 2,101 V -1 small-signal figure of merit (FOM S ) and 1,070 large-signal figure of merit (FOM L ). To the best of the authors' knowledge, the power is the lowest reported to date in an OTA, and the achieved figures of merit are the best in sub-500 mV OTAs reported to date. The low cost, the low design effort and the high power efficiency of DB-OTA make it well suited for purely harvested low-frequency analog interfaces in sensor nodes.
- 28 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Non-Linear Shunt Regulator With RF Power Detector for RFID Applications
This paper presents a non-linear shunt regulator based on a PWM RF power detector for RFID applications. The shunt regulator is composed of two feedback loops. The first is a fast loop based on a simple RF voltage clamp that guarantees overvoltage protection for the internal circuits. The second is an accurate loop based on a power detector circuit that slowly corrects the first loop errors according to the input RF power. The theoretical formulation of the RF-to-DC conversion in the power detector is presented and compared to a high-level implementation. A small-signal model of the complete shunt regulator was developed to assist in the CMOS circuit design. The regulator is part of a commercial low-frequency RFID transponder. It shows an improvement of 16.7 % in the maximum communication distance of the transponder with the shunt regulator enabled when compared to the previous power limiting approach using only clamping diodes.
- 28 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Non-Linear Shunt Regulator With RF Power Detector for RFID Applications
This paper presents a non-linear shunt regulator based on a PWM RF power detector for RFID applications. The shunt regulator is composed of two feedback loops. The first is a fast loop based on a simple RF voltage clamp that guarantees overvoltage protection for the internal circuits. The second is an accurate loop based on a power detector circuit that slowly corrects the first loop errors according to the input RF power. The theoretical formulation of the RF-to-DC conversion in the power detector is presented and compared to a high-level implementation. A small-signal model of the complete shunt regulator was developed to assist in the CMOS circuit design. The regulator is part of a commercial low-frequency RFID transponder. It shows an improvement of 16.7 % in the maximum communication distance of the transponder with the shunt regulator enabled when compared to the previous power limiting approach using only clamping diodes.
- Open Access
- 12 June 2020
- Published by MDPI AG in Electronics
- Vol. 9 (6) , 983
Dynamic and Static Calibration of Ultra-Low-Voltage, Digital-Based Operational Transconductance Amplifiers
The calibration of the effects of process variations and device mismatch in Ultra Low Voltage (ULV) Digital-Based Operational Transconductance Amplifiers (DB-OTAs) is addressed in this paper. For this purpose, two dynamic calibration techniques, intended to dynamically vary the effective strength of critical gates by different modulation strategies, i.e., Digital Pulse Width Modulation (DPWM) and Dyadic Digital Pulse Modulation (DDPM), are explored and compared to classic static calibration. The effectiveness of the calibration approaches as a mean to recover acceptable performance in non-functional samples is verified by Monte-Carlo (MC) post-layout simulations performed on a 300 mV power supply, nW-power DB-OTA in 180 nm CMOS. Based on the same MC post-layout simulations, the impact of each calibration strategy on silicon area, power consumption, and OTA performance is discussed.
- 12 June 2020
- Published by MDPI AG in Electronics
- Vol. 9 (6) , 983
Open AccessDynamic and Static Calibration of Ultra-Low-Voltage, Digital-Based Operational Transconductance Amplifiers
The calibration of the effects of process variations and device mismatch in Ultra Low Voltage (ULV) Digital-Based Operational Transconductance Amplifiers (DB-OTAs) is addressed in this paper. For this purpose, two dynamic calibration techniques, intended to dynamically vary the effective strength of critical gates by different modulation strategies, i.e., Digital Pulse Width Modulation (DPWM) and Dyadic Digital Pulse Modulation (DDPM), are explored and compared to classic static calibration. The effectiveness of the calibration approaches as a mean to recover acceptable performance in non-functional samples is verified by Monte-Carlo (MC) post-layout simulations performed on a 300 mV power supply, nW-power DB-OTA in 180 nm CMOS. Based on the same MC post-layout simulations, the impact of each calibration strategy on silicon area, power consumption, and OTA performance is discussed.
- 31 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 66 (10) , 1663-1667
A 0.3–1.2 V Schottky-Based CMOS ZTC Voltage Reference
A voltage reference based on MOSFETs operated under Zero Temperature Coefficient (ZTC) bias is proposed. The circuit operates in a power supply voltage range from 0.3V up to 1.2V and outputs three different reference voltages using Standard-VT (SVT), Low-VT (LVT), and Zero-VT (ZVT) MOS transistors biased near their ZTC point by a single PTAT current reference. Measurements on 15 circuit samples fabricated in a standard 0.13-μm CMOS process show a worst-case normalized standard deviation (σ/μ) of 3% (SVT), 5.1% (LVT) and 10.8% (ZVT) respectively with a 75% of confidence level. At the nominal supply voltage of 0.45 V, the measured effective temperature coefficients (TCeff) range from 140 to 200 ppm/∘C over the full commercial temperature range. At room temperature (25∘C), line sensitivity in the ZVT VR is just 1.3%/100mV, over the whole supply range. The proposed reference draws around 5 μW and occupies 0.014 mm2 of silicon area.
- 31 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 66 (10) , 1663-1667
A 0.3–1.2 V Schottky-Based CMOS ZTC Voltage Reference
A voltage reference based on MOSFETs operated under Zero Temperature Coefficient (ZTC) bias is proposed. The circuit operates in a power supply voltage range from 0.3V up to 1.2V and outputs three different reference voltages using Standard-VT (SVT), Low-VT (LVT), and Zero-VT (ZVT) MOS transistors biased near their ZTC point by a single PTAT current reference. Measurements on 15 circuit samples fabricated in a standard 0.13-μm CMOS process show a worst-case normalized standard deviation (σ/μ) of 3% (SVT), 5.1% (LVT) and 10.8% (ZVT) respectively with a 75% of confidence level. At the nominal supply voltage of 0.45 V, the measured effective temperature coefficients (TCeff) range from 140 to 200 ppm/∘C over the full commercial temperature range. At room temperature (25∘C), line sensitivity in the ZVT VR is just 1.3%/100mV, over the whole supply range. The proposed reference draws around 5 μW and occupies 0.014 mm2 of silicon area.