Preparation and Characterization of In Situ Carbide Particle Reinforced Fe-Based Gradient Materials by Laser Melt Deposition
Open Access
Abstract
To obtain the wear-resistant camshaft with surface rigidity and core toughness and improve the service life of camshaft, wear-resistant Fe-based alloy gradient material was prepared by laser melt deposition. The traditional camshaft was forged by 12CrNi2V. In this paper, four types of wear-resistant Fe-based powders were designed by introducing various content of Cr3C2 and V-rich Fe-based alloy (FeV50) into stainless steel powder. The results showed that the gradient materials formed a satisfactory metallurgical bond. The composition of the phases was mainly composed of α-Fe, Cr23C6, and V2C phases. The increasing of Cr3C2 and FeV50 led to transform V2C into the V8C7. The microstructures were mainly cellular dendrite and intergranular structure. Due to the addition of Cr3C2 and FeV50, the average microhardness and wear resistance of gradient materials were significantly better than that of 12CrNi2V. The sample with 8% V had the highest microhardness of 853 ± 18 HV, which was 2.6 times higher than that of 12CrNi2V. The sample with 6% V had the best wear resistance, which was 21 times greater than that of 12CrNi2V.Keywords
Funding Information
- Shenyang Science and Technology Funded Project (Z18-5-012, 18-004-1-16, 18-201-0-02)
- National Key Research and Development Program of China (2016YFB1100204)
- Key Research Project from Science and Technology Commission of Liaoning Province (2017106036, 2018106004)
This publication has 47 references indexed in Scilit:
- The impact of powder oxygen content on formability of 12CrNi2 alloy steel fabricated by laser melting depositionPowder Metallurgy, 2019
- The Evaluation of Durability of Plasma-Sprayed Thermal Barrier Coatings with Double-layer Bond CoatCoatings, 2019
- Static and dynamic analysis of the postbuckling of bi-directional functionally graded material microbeamsInternational Journal of Mechanical Sciences, 2019
- Effect of laser incident energy on microstructures and mechanical properties of 12CrNi2Y alloy steel by direct laser depositionJournal of Materials Science & Technology, 2019
- Dynamic Fracture Analysis of Functional Gradient Material Coating Based on the Peridynamic MethodCoatings, 2019
- Comparative study of IN600 superalloy produced by two powder metallurgy technologies: Argon Atomizing and Plasma Rotating Electrode ProcessVacuum, 2018
- Titanium/hydroxyapatite (Ti/HA) gradient materials with quasi-continuous ratios fabricated by SLM: Material interface and fracture toughnessMaterials & Design, 2018
- Corrosion and Thermal Fatigue Behaviors of TiC/Ni Composite Coating by Self-Propagating High-Temperature Synthesis in Molten Aluminum AlloyCoatings, 2017
- A balancing cam mechanism for minimizing the torque fluctuation of engine camshaftsMechanism and Machine Theory, 2017
- Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modelingActa Materialia, 2016