Finite Element Analysis of Creep Behavior in Interlaced Polymer Structures With Composite 3‐D Printing Materials
Authors:
- 10 July 2026
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
Abstract
Additively manufactured interlaced flexible polymeric structures enable single‐step fabrication of customized architectures for applications in protective equipment, wearable technologies, and healthcare devices. Because these applications often experience prolonged loading, understanding creep behavior is essential for ensuring long‐term structural integrity and functional reliability. This study numerically investigates the creep response of textile‐inspired interlaced geometries subjected to sustained loading in the warp direction. Finite element simulations were conducted in Abaqus/Standard using experimentally developed creep models for polylactic acid (PLA)‐based composite printing materials. Three interlacing architectures, 2/1 twill, basket, and warp‐rib, were evaluated across nine material formulations to examine the combined effects of geometry and material composition. The influence of weft yarn inclusion on time‐dependent deformation was also assessed. Creep performance was characterized through displacement, creep strain, internal energy, and creep dissipation energy. Results show that weft inclusion reduces displacement, with the greatest reduction observed in 2/1 twill and the smallest in basket structures. Twill exhibited the highest creep strain but also the most efficient energy storage, whereas warp‐rib dissipated the most energy. Material composition significantly affected creep behavior, with thermoplastic polyurethane (TPU)/polyethylene glycol (PEG) additions increasing creep strain and energy dissipation, while pure PLA demonstrated the highest creep resistance.Keywords
This publication has 15 references indexed in Scilit:
- Optimization of 3D printing parameters for PLGA/HA scaffolds using the Taguchi methodJournal of the Mechanical Behavior of Biomedical Materials, 2026
- Creep behavior of 3D printed polymer compositesPolymer Engineering & Science, 2023
- Numerical and experimental investigation on creep response of 3D printed Polylactic acid (PLA) samples. Part I: The effect of building direction and unidirectional raster orientationJournal of the Mechanical Behavior of Biomedical Materials, 2023
- Multi-material fused filament fabrication of flexible 3D piezoelectric nanocomposite lattices for pressure sensing and energy harvesting applicationsApplied Materials Today, 2022
- Fabrication and Properties of Thermoplastic Polyurethane/Silver Parts via Fused Deposition Modeling for Electromagnetic Interference Shielding and Wearable SensorsAdvanced Engineering Materials, 2021
- A study of creep in polycarbonate fused deposition modelling partsMaterials & Design, 2018
- The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturingBusiness Horizons, 2017
- Polymer Engineering Science and Viscoelasticity2015
- Mechanical Properties of Solid Polymers2012
- Viscoelastic properties of polymers. John D. Ferry, Wiley, New York, 1961. xx + 482 pp. $15.00Journal of Polymer Science, 1961