Ashok Sapkota
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ashok Sapkota has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Sabit Adanur
Auburn University
3 shared publications - Shree Kaji Ghimire
Auburn University
3 shared publications Sabit Adanur
Department of Mechanical Engineering Auburn University Auburn Alabama USA
1 shared publication
Latest Publications
- 10 July 2026
- Published by Wiley in Polymer Engineering & Science
Finite Element Analysis of Creep Behavior in Interlaced Polymer Structures With Composite 3‐D Printing Materials
Additively manufactured interlaced flexible polymeric structures enable single‐step fabrication of customized architectures for applications in protective equipment, wearable technologies, and healthcare devices. Because these applications often experience prolonged loading, understanding creep behavior is essential for ensuring long‐term structural integrity and functional reliability. This study numerically investigates the creep response of textile‐inspired interlaced geometries subjected to sustained loading in the warp direction. Finite element simulations were conducted in Abaqus/Standard using experimentally developed creep models for polylactic acid (PLA)‐based composite printing materials. Three interlacing architectures, 2/1 twill, basket, and warp‐rib, were evaluated across nine material formulations to examine the combined effects of geometry and material composition. The influence of weft yarn inclusion on time‐dependent deformation was also assessed. Creep performance was characterized through displacement, creep strain, internal energy, and creep dissipation energy. Results show that weft inclusion reduces displacement, with the greatest reduction observed in 2/1 twill and the smallest in basket structures. Twill exhibited the highest creep strain but also the most efficient energy storage, whereas warp‐rib dissipated the most energy. Material composition significantly affected creep behavior, with thermoplastic polyurethane (TPU)/polyethylene glycol (PEG) additions increasing creep strain and energy dissipation, while pure PLA demonstrated the highest creep resistance.
- 10 July 2026
- Published by Wiley in Polymer Engineering & Science
Finite Element Analysis of Creep Behavior in Interlaced Polymer Structures With Composite 3‐D Printing Materials
Additively manufactured interlaced flexible polymeric structures enable single‐step fabrication of customized architectures for applications in protective equipment, wearable technologies, and healthcare devices. Because these applications often experience prolonged loading, understanding creep behavior is essential for ensuring long‐term structural integrity and functional reliability. This study numerically investigates the creep response of textile‐inspired interlaced geometries subjected to sustained loading in the warp direction. Finite element simulations were conducted in Abaqus/Standard using experimentally developed creep models for polylactic acid (PLA)‐based composite printing materials. Three interlacing architectures, 2/1 twill, basket, and warp‐rib, were evaluated across nine material formulations to examine the combined effects of geometry and material composition. The influence of weft yarn inclusion on time‐dependent deformation was also assessed. Creep performance was characterized through displacement, creep strain, internal energy, and creep dissipation energy. Results show that weft inclusion reduces displacement, with the greatest reduction observed in 2/1 twill and the smallest in basket structures. Twill exhibited the highest creep strain but also the most efficient energy storage, whereas warp‐rib dissipated the most energy. Material composition significantly affected creep behavior, with thermoplastic polyurethane (TPU)/polyethylene glycol (PEG) additions increasing creep strain and energy dissipation, while pure PLA demonstrated the highest creep resistance.
- Open Access
- 29 April 2025
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 55
Fused deposition modeling (FDM) process parameter optimization for mechanical properties of 3D-printed woven fabric structures using Taguchi method
Fused deposition modeling (FDM) process parameters influence the mechanical behavior of the printed parts. Optimization of parameters like extrusion temperature, layer height, print speed and infill density enhances the performance of the product. The ability to process a variety of thermoplastic materials and quick and personalized design makes FDM a desirable alternative process to manufacture fabric structures. However, the mechanical properties are often compromised. This research attempts to optimize extrusion temperature, layer height and print speed for manufacturing of 2/1 twill woven fabric structure for desired properties. In this work, Taguchi robust design is used for experimental design. Samples from Polylactic acid (PLA) are subjected to tensile and flexural loading. Tensile strength, tensile modulus, flexural strength and flexural modulus are recorded and optimized using commercial software MINITAB. The order of influence of process parameters on fabric is varied for different properties evaluated. Either extrusion temperature or layer height is reported to be the most influential process parameter for the fabric sample. In contrast, print speed does not have significant effect on most of the properties studied. The mechanical properties and nature of influence by process parameters are found to be dissimilar in warp and weft direction.
- 29 April 2025
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 55
Open AccessFused deposition modeling (FDM) process parameter optimization for mechanical properties of 3D-printed woven fabric structures using Taguchi method
Fused deposition modeling (FDM) process parameters influence the mechanical behavior of the printed parts. Optimization of parameters like extrusion temperature, layer height, print speed and infill density enhances the performance of the product. The ability to process a variety of thermoplastic materials and quick and personalized design makes FDM a desirable alternative process to manufacture fabric structures. However, the mechanical properties are often compromised. This research attempts to optimize extrusion temperature, layer height and print speed for manufacturing of 2/1 twill woven fabric structure for desired properties. In this work, Taguchi robust design is used for experimental design. Samples from Polylactic acid (PLA) are subjected to tensile and flexural loading. Tensile strength, tensile modulus, flexural strength and flexural modulus are recorded and optimized using commercial software MINITAB. The order of influence of process parameters on fabric is varied for different properties evaluated. Either extrusion temperature or layer height is reported to be the most influential process parameter for the fabric sample. In contrast, print speed does not have significant effect on most of the properties studied. The mechanical properties and nature of influence by process parameters are found to be dissimilar in warp and weft direction.
- 4 February 2025
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 31 (5) , 934-949
Effect of FDM process parameters on mechanical properties of 3D-printed fabrics and yarns from polyethylene terephthalate glycol, nylon and thermoplastic polyurethane
Purpose: Optimization of FDM process parameters has emerged as a major step toward mitigating the issue of reduced mechanical strength of fused deposition modeling (FDM) products. This study aims to evaluate the impact of process parameters on the mechanical properties of 3D-printed fabric yarns of three different materials, namely, polyethylene terephthalate glycol (PETG), nylon and thermoplastic polyurethane (TPU). Design/methodology/approach: 2/1 Twill fabric samples with variations of extrusion temperatures and printing profiles are produced, and the individual yarns, manually separated from the fabric samples, are tested for tensile strength, modulus, strain and energy at maximum force. The tensile test results are further subjected to statistical analysis with MINITAB software to detect the standard level of influence of each parameter and evaluate their significance. Findings: Both extrusion temperature and printing profile, along with their interaction, are significantly important parameters for the mechanical behavior of PETG. However, for nylon and TPU, the influence of a few parameters is found to be insignificant. For all variations of fabric yarns, relatively lower extrusion temperature is concluded to be preferable for better mechanical properties. Originality/value: This research is new and original. It provides knowledge about how FDM process parameters influence the mechanical behavior of fabrics. It also identifies the optimum process parameters for the best performance of the final product. This article can be a foundation for further parametric analysis of 3D-printed fabric. No artificial intelligence or similar software was used in the preparation of this manuscript.
- 4 February 2025
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 31 (5) , 934-949
Effect of FDM process parameters on mechanical properties of 3D-printed fabrics and yarns from polyethylene terephthalate glycol, nylon and thermoplastic polyurethane
Purpose: Optimization of FDM process parameters has emerged as a major step toward mitigating the issue of reduced mechanical strength of fused deposition modeling (FDM) products. This study aims to evaluate the impact of process parameters on the mechanical properties of 3D-printed fabric yarns of three different materials, namely, polyethylene terephthalate glycol (PETG), nylon and thermoplastic polyurethane (TPU). Design/methodology/approach: 2/1 Twill fabric samples with variations of extrusion temperatures and printing profiles are produced, and the individual yarns, manually separated from the fabric samples, are tested for tensile strength, modulus, strain and energy at maximum force. The tensile test results are further subjected to statistical analysis with MINITAB software to detect the standard level of influence of each parameter and evaluate their significance. Findings: Both extrusion temperature and printing profile, along with their interaction, are significantly important parameters for the mechanical behavior of PETG. However, for nylon and TPU, the influence of a few parameters is found to be insignificant. For all variations of fabric yarns, relatively lower extrusion temperature is concluded to be preferable for better mechanical properties. Originality/value: This research is new and original. It provides knowledge about how FDM process parameters influence the mechanical behavior of fabrics. It also identifies the optimum process parameters for the best performance of the final product. This article can be a foundation for further parametric analysis of 3D-printed fabric. No artificial intelligence or similar software was used in the preparation of this manuscript.
- Top Cited PapersOpen Access
- 1 January 2024
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 54
A review on fused deposition modeling (FDM)-based additive manufacturing (AM) methods, materials and applications for flexible fabric structures
Fused Deposition Modeling (FDM) is an extrusion type additive manufacturing (AM) method in which a molten polymer is selectively extruded in layer-by-layer manner. Although there are several other AM techniques, FDM is a suitable method to produce fabric structures as it is capable of processing polymers and is widely used in various engineering applications. This article summarizes the current research works in characterization of FDM parts, advancements in materials used in FDM and latest works related to making fabric samples using FDM. The results show that the mechanical properties and surface quality are compromised in FDM parts. Strength and flexibility with better surface finishing are essential parameters in fabric structures. There are mainly two techniques that are explored by researchers to enhance the quality of the parts. The first is optimizing process parameters and the second is improving material quality. FDM process parameters like extrusion temperature, layer height, print speed and built orientation can significantly influence the quality of the parts. Optimizing these parameters can significantly enhance the strength of the fabric produced. Moreover, a great amount of impetus is given to improve material by reinforcing it and making polymer blends with specific qualities. There has been studies related to the development of fabric structures and deposition of polymers on fabrics with FDM. It is concluded that the major concern with such structures is strength and processability. To address these issues, optimizing process parameters and developing new filaments for exclusively making fabrics can be the future work in this area.
- 1 January 2024
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 54
Top Cited PapersOpen AccessA review on fused deposition modeling (FDM)-based additive manufacturing (AM) methods, materials and applications for flexible fabric structures
Fused Deposition Modeling (FDM) is an extrusion type additive manufacturing (AM) method in which a molten polymer is selectively extruded in layer-by-layer manner. Although there are several other AM techniques, FDM is a suitable method to produce fabric structures as it is capable of processing polymers and is widely used in various engineering applications. This article summarizes the current research works in characterization of FDM parts, advancements in materials used in FDM and latest works related to making fabric samples using FDM. The results show that the mechanical properties and surface quality are compromised in FDM parts. Strength and flexibility with better surface finishing are essential parameters in fabric structures. There are mainly two techniques that are explored by researchers to enhance the quality of the parts. The first is optimizing process parameters and the second is improving material quality. FDM process parameters like extrusion temperature, layer height, print speed and built orientation can significantly influence the quality of the parts. Optimizing these parameters can significantly enhance the strength of the fabric produced. Moreover, a great amount of impetus is given to improve material by reinforcing it and making polymer blends with specific qualities. There has been studies related to the development of fabric structures and deposition of polymers on fabrics with FDM. It is concluded that the major concern with such structures is strength and processability. To address these issues, optimizing process parameters and developing new filaments for exclusively making fabrics can be the future work in this area.