Double-Sided Fabrication of TSV Interposer With Parylene-Based Damascene RDLs Achieved by Selective Electroless Plating
- 6 November 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (1) , 140-143
Abstract
In this letter, a novel double-sided fabrication scheme for Si interposer composed of through-silicon-vias (TSVs) and re-distribution layers (RDLs) is proposed. The ultra-deep TSVs are manufactured based on through-vias by double-sided processes. After chemical mechanical polishing (CMP) on both sides, a novel Damascene pro-cess based on selective electroless plating (ELP) is carried out to fabricate RDLs with parylene dielectric layers, in which the Cu RDLs are selectively formed in etched pat-terns as the catalysts are only reserved in these regions by incorporating a lift-off step into ELP. Note that the fabrica-tion scheme shows good conformability across the 4-inch wafer, which exhibits a small warpage of only 64.7 μm. Measurement results highlight the good electrical perfor-mance of the fabricated TSVs in terms of keeping stable parasitic capacitance as low as 565 fF in the range of -40 V to 40 V, and low leakage current of 1.21 pA at 20 V.Keywords
Funding Information
- National Natural Science Foundation of China (62404019)
- National Natural Science Foundation of China (92373105)
- National Natural Science Foundation of China (62074015)
This publication has 30 references indexed in Scilit:
- A contamination-free and low-leakage-current Cu-TSV technology enabled by engineered double-sided processingMicrosystems & Nanoengineering, 2025
- Parylene with different functional groups as a passivation layer for highly stable a-IGTO thin-film transistorsMaterials Science in Semiconductor Processing, 2025
- An ultra-deep TSV technique enabled by the dual catalysis-based electroless plating of combined barrier and seed layersMicrosystems & Nanoengineering, 2024
- A novel fully additive fabrication approach for creating double-stacked copper spiral inductors2024
- Vertically Integrated Electronics: New Opportunities from Emerging Materials and DevicesNano-Micro Letters, 2022
- Direct additive copper plating on polyimide surface with silver ammonia via plasma modificationApplied Surface Science, 2022
- FOWLP-Based Flexible Hybrid Electronics with 3D-IC Chiplets for Smart Skin Display2021
- Interconnect Fabrication by Electroless Plating on 3D-Printed Electroplated PatternsACS Applied Materials & Interfaces, 2021
- Wettability and surface energy of parylene F deposited on PDMSPhysics Letters A, 2020
- A Prospective Low-k Insulator for Via-Last through-Silicon-Vias (TSVs) in 3D Integration2016