Measuring Residual Stresses with Crack Compliance Methods: An Ill-Posed Inverse Problem with a Closed-Form Kernel
Open Access
- 14 July 2024
- journal article
- research article
- Published by MDPI AG in Applied Mechanics
- Vol. 5 (3) , 475-489
Abstract
By means of relaxation methods, residual stresses can be obtained by introducing a progressive cut or a hole in a specimen and by measuring and elaborating the strains or displacements that are consequently produced. If the cut can be considered a controlled crack-like defect, by leveraging Bueckner’s superposition principle, the relaxed strains can be modeled through a weighted integral of the residual stress relieved by the cut. To evaluate residual stresses, an integral equation must be solved. From a practical point of view, the solution is usually based on a discretization technique that transforms the integral equation into a linear system of algebraic equations, whose solutions can be easily obtained, at least from a computational point of view. However, the linear system is often significantly ill-conditioned. In this paper, it is shown that its ill-conditioning is actually a consequence of a much deeper property of the underlying integral equation, which is reflected also in the discretized setting. In fact, the original problem is ill-posed. The ill-posedness is anything but a mathematical sophistry; indeed, it profoundly affects the properties of the discretized system too. In particular, it induces the so-called bias–variance tradeoff, a property that affects many experimental procedures, in which the analyst is forced to introduce some bias in order to obtain a solution that is not overwhelmed by measurement noise. In turn, unless it is backed up by sound and reasonable physical assumptions on some properties of the solution, the introduced bias is potentially infinite and impairs every uncertainty quantification technique. To support these topics, an illustrative numerical example using the crack compliance (also known as slitting) method is presented. The availability of the Linear Elastic Fracture Mechanics Weight Function for the problem allows for a completely analytical formulation of the original integral equation by which bias due to the numerical approximation of the physical model is prevented.Keywords
This publication has 42 references indexed in Scilit:
- Measurement of Structural Stresses by Hole-Drilling and DICExperimental Mechanics, 2017
- Development of 3-D Digital Image Correlation Using a Single Color-Camera and Diffractive Speckle ProjectionExperimental Mechanics, 2016
- Residual Stress Measurement Using Hole Drilling and Integrated Digital Image Correlation TechniquesExperimental Mechanics, 2013
- Practical Residual Stress Measurement Methods2013
- Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DICExperimental Mechanics, 2012
- Full-field calculation of hole drilling residual stresses from electronic speckle pattern interferometry dataExperimental Mechanics, 2005
- Surveys on Solution Methods for Inverse Problems2000
- Optimal calculation steps for the evaluation of residual stress by the incremental hole-drilling methodExperimental Mechanics, 1999
- Experimental determination of stress intensity factors due to residual stressesExperimental Mechanics, 1997
- Numerical Methods for the Solution of Ill-Posed Problems1995