MBMarco Beghini

Marco Beghini

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marco Beghini has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Measuring Residual Stresses with Crack Compliance Methods: An Ill-Posed Inverse Problem with a Closed-Form Kernel

    by Marco Beghini, Tommaso Grossi

    By means of relaxation methods, residual stresses can be obtained by introducing a progressive cut or a hole in a specimen and by measuring and elaborating the strains or displacements that are consequently produced. If the cut can be considered a controlled crack-like defect, by leveraging Bueckner’s superposition principle, the relaxed strains can be modeled through a weighted integral of the residual stress relieved by the cut. To evaluate residual stresses, an integral equation must be solved. From a practical point of view, the solution is usually based on a discretization technique that transforms the integral equation into a linear system of algebraic equations, whose solutions can be easily obtained, at least from a computational point of view. However, the linear system is often significantly ill-conditioned. In this paper, it is shown that its ill-conditioning is actually a consequence of a much deeper property of the underlying integral equation, which is reflected also in the discretized setting. In fact, the original problem is ill-posed. The ill-posedness is anything but a mathematical sophistry; indeed, it profoundly affects the properties of the discretized system too. In particular, it induces the so-called bias–variance tradeoff, a property that affects many experimental procedures, in which the analyst is forced to introduce some bias in order to obtain a solution that is not overwhelmed by measurement noise. In turn, unless it is backed up by sound and reasonable physical assumptions on some properties of the solution, the introduced bias is potentially infinite and impairs every uncertainty quantification technique. To support these topics, an illustrative numerical example using the crack compliance (also known as slitting) method is presented. The availability of the Linear Elastic Fracture Mechanics Weight Function for the problem allows for a completely analytical formulation of the original integral equation by which bias due to the numerical approximation of the physical model is prevented.


  • Open Access

    Gamma Irradiation Effect on Polymeric Chains of Epoxy Adhesive

    by Carino Ferrante, Leonardo Lucchesi, Alessia Cemmi, Ilaria Di Sarcina, Jessica Scifo, Adriano Verna, Andrea Taschin, Luca Senni, Marco Beghini, Bernardo Disma Monelli, et al.

    The study of materials for space exploration is one of the most interesting targets of international space agencies. An essential tool for realizing light junctions is epoxy adhesive (EA), which provides an elastic and robust material with a complex mesh of polymeric chains and crosslinks. In this work, a study of the structural and chemical modification of a commercial two-part flexible EA (3M™ Scotch-Weld™ EC-2216 B/A Gray), induced by 60Co gamma radiation, is presented. Combining different spectroscopic techniques, such as the spectroscopic Fourier transform infrared spectroscopy (FTIR), the THz time-domain spectroscopy (TDS), and the electron paramagnetic resonance (EPR), a characterization of the EA response in different regions of the electromagnetic spectrum is performed, providing valuable information about the structural and chemical properties of the polymers before and after irradiation. A simultaneous dissociation of polymeric chain and crosslinking formation is observed.The polymer is not subject to structural modification at an absorbed dose of 10 kGy, in which only transient free radicals are observed. Differently, between 100 and 500 kGy, a gradual chemical degradation of the samples is observed together with a broad and long-living EPR signal appearance. This study also provides a microscopic characterization of the material useful for the mechanism evaluation of system degradation.


  • Tuning Modal Behavior of Additively Manufactured Lattice Structures

    by Marco Beghini, Tommaso Grossi, Giuseppe Macoretta, Bernardo Disma Monelli, Ivan Senegaglia, Paolo del Turco, Andrea Fardelli, Francesco Morante

    Thanks to the increasingly widespread additive manufacturing technology and promising properties, the use of lattice structures (LS) is becoming increasingly frequent. LS allows the components to be designed with tunable stiffness, which can unlock the control of natural frequencies. However, crucial challenges must be faced to integrate LS into the typical design process. In this work, an experimental and numerical study of LS-enabled tuning of natural frequencies in mechanical components are proposed. In a first step, the difficulties arising with the large amount of finite element method (FEM) nodes, that are required to predict LS complex shapes in detail, are overcome by modeling LS with an elastic metamaterial whose stiffness properties are determined through ad hoc finite element analyses. After that, a simplified investigation can be conducted on the modal properties of components with fixed external shape and variable internal LS filling, based on triply periodic minimal surfaces (TPMS) lattices. In those conditions, the parameters of the LS core can be tuned to control and optimize the global modal frequencies of the entire geometry. In addition, the admissible range of frequencies can be estimated. Optimized plates results are validated through an experimental test campaign on additively manufactured specimens made with laser powder bed fusion technology. The samples are hammer-tested with various boundary conditions while laser sensors measure the oscillation data of selected points. Finally, estimated and identified natural frequencies were compared. The described model is suitable to be implemented in an automated tool for designers.


  • Open Access

    Design for manufacturing of a spur gears profile modification based on the static transmission error for improving the dynamic behavior

    by Michele Abruzzo, Marco Beghini, Luca Romoli, Ciro Santus

    This study presents a novel iterative algorithm for obtaining an improved profile modification for spur gears based on minimizing the peak-to-peak static transmission error. Two improved profile modifications, obtained with different initial constraints applied to the tooth profile, were calculated and characterized. The static behavior of the gears was analyzed using a finite element model, by which the modifications were compared considering the maximum contact pressure and peak-to-peak static transmission error. The dynamic behavior of the gears was analyzed using a lumped parameter model. The dynamic overload and the dynamic transmission error were evaluated under several working regimes. The grinding wheel profiles used to realize the proposed profile modifications and the total volume of material removed were calculated using a CAD model. The results showed that the proposed modifications lead to a significant improvement in the static and dynamic behavior of the transmission by reducing both the maximum dynamic overload and meshing noise. The profiles of the grinding wheel were found to be accurately represented by polynomial functions, thus a feasible manufacturing process can be obtained. The total volume of material removed was lower than that produced by commonly adopted profile modifications, thus reducing material waste and increasing the productivity of the manufacturing process compared to standard profile modifications.


  • Open Access

    Multiaxial cyclic plasticity model including elastic modulus variation

    by M Barsanti, M Beghini, M Loffredo, G Macoretta, B D Monelli, A Bagattini

    In the present work a multiaxial model is proposed to describe the elastoplastic behaviour of a structural steel in the presence of loading-unloading cycles. The activity is a part of a more estensive research carried out in collaboration with Baker & Hughes aimed at developing an accurate model for accurately predicing residual stresses caused by autofrettage processes in thick cylinders and its experimental verification. It has been demostrated that in order to obtain estimates of the residual stress with errors within a few percent, the constitutive behavior of the material has to be reproduced very accurately. To this purpose, both the Bauschinger effect and the variation of the elastic modulus with the accumulated plastic deformation have to be accurately measured and properly included in the constitutive model.

  • Modeling and Measuring Residual Stress in Autofrettaged Hollow Cylinders Through the Initial Strain Distribution Method

    by Matteo Loffredo, Andrea Bagattini, Bernardo D. Monelli, Marco Beghini

    The paper presents a method for modeling and measuring the residual stress (RS) field in axisymmetric autofrettaged elements. The method is based on the assumption that an Initial Strain Distribution (ISD), originated by the plastic strain previously induced during the autofrettage process, is the source of RSs. The ISD is the quantity to be evaluated and, after being determined, it can be used, by means of a dedicated finite element (FE) model, to evaluate the RS field in the component or in any part extracted from it. The ISD is obtained by elaborating the relaxed strains produced by cutting the autofrettaged component in incremental steps. The elaboration is based on solving a set of Fredholm's integral equations in which the unknown function is the ISD and the kernel is an Influence Function (IF) correlating the measured relaxed strain to the ISD. After a general discussion of the RS induced by the autofrettage and the effect of the plastic properties of the material under process, the methods for obtaining the relaxed strains by a rational experimental setup and the procedures for obtaining the IFs are presented and discussed. The whole methodology is applied to evaluate the RS field in a hollow cylinder for which the autofrettage was modeled by a FE simulation. The consistency of the method is verified and useful indications for the experimental activities were obtained.