MRI‐based transfer function determination for the assessment of implant safety
- 5 February 2017
- journal article
- research article
- Published by Wiley in Magnetic Resonance in Medicine
- Vol. 78 (6) , 2449-2459
Abstract
Purpose: We introduce a new MR‐based method to determine the transfer function (TF) for radiofrequency (RF) safety assessment of active implantable medical devices. Transfer functions are implant‐specific measures that relate the incident tangential electric field on an (elongated) implant to a scattered electric field at its tip. The proposed method allows for TF determination with a high spatial resolution in relatively fast measurements without requiring dedicated bench setups from MRI images.Theory and Methods: The principle of reciprocity is used in conjunction with the potential to measure currents with MRI to determine TF. Low‐flip angle 3D dual gradient echo MRI data are acquired with an implant as transceive antenna, which requires minimal hardware adaptations. The implant‐specific TF is determined from the acquired MRI data, with two different postprocessing methods for comparison.Results: TFs of linear and helical implants can be determined accurately (with a Pearson correlation coefficient R ≥ 0.7 between measurements and simulations, and a difference in field at the tip ΔEtip ≤ 19%) from relatively quick (t < 20 minutes) MRI acquisitions with (several) millimeter spatial resolution.Conclusion: Transfer function determination with MRI for RF safety assessment of implantable medical devices is possible. The proposed MR‐based method allows for TF determination in more realistic exposure scenarios and solid media. Magn Reson Med 78:2449–2459, 2017. © 2017 International Society for Magnetic Resonance in MedicineKeywords
Funding Information
- Supported by the DeNeCor project being part of the ENIAC Joint Undertaking
This publication has 18 references indexed in Scilit:
- Safely assessing radiofrequency heating potential of conductive devices using image‐based current measurementsMagnetic Resonance in Medicine, 2014
- Implantable Devices: Issues and ChallengesElectronics, 2012
- Reduction of the radiofrequency heating of metallic devices using a dual‐drive birdcage coilMagnetic Resonance in Medicine, 2012
- B Phase mapping at 7 T and its application for in vivo electrical conductivity mappingMagnetic Resonance in Medicine, 2011
- Reduction of implant RF heating through modification of transmit coil electric fieldMagnetic Resonance in Medicine, 2010
- Ensuring safety of implanted devices under MRI using reversed RF polarizationMagnetic Resonance in Medicine, 2010
- Measuring RF‐induced currents inside implants: Impact of device configuration on MRI safety of cardiac pacemaker leadsMagnetic Resonance in Medicine, 2009
- The follow-up of cardiac devices: what to expect for the future?European Heart Journal Supplements, 2007
- Calculation of MRI‐induced heating of an implanted medical lead wire with an electric field transfer functionJournal of Magnetic Resonance Imaging, 2007
- Simple design changes to wires to substantially reduce MRI-induced heating at 1.5 T: implications for implanted leadsMagnetic Resonance Imaging, 2005