Development of a methodology for determining the content of non-metallic inclusions in steel
Open Access
- 1 September 2024
- journal article
- Published by National University of Science and Technology MISiS in Izvestiya. Ferrous Metallurgy
- Vol. 67 (4) , 471-480
Abstract
As part of the study, a method was proposed for assessing the metal purity for non-metallic inclusions using optical emission spectrometry. To assess the content of non-metallic inclusions in the slabs, two columns of metal were selected from two slabs of low-alloy metal deoxidized with aluminum. Each column was divided into seven samples in the direction from the small radius of the continuously cast ingot to the large one. We studied these samples to assess metal contamination with non-metallic inclusions using quantitative optical metallography according to ASTM E1245-03, fractional gas analysis (FGA) and optical emission spectral analysis PDA. Analysis of the samples according to ASTM E1245-03 standard showed that in all samples the percentage of oxides and sulfides is on average 10 and 90 %, respectively. According to the results of FGA, it was concluded that such non-metallic oxide inclusions as aluminates predominate in the metal samples of both ingots. A comparison was made between the results of the determination of oxygen in non-metallic inclusions obtained by FGA method and the number of sparks in inclusions at the analysis by PDA method; analysis of the dependencies showed that there are two clearly defined point distributions. To carry out PDA analysis, a program was developed that allows determining the number of inclusions of various types and calculate their volume fraction.Keywords
This publication has 19 references indexed in Scilit:
- Analysis of inner fold and bulge defects on J55 steel for oil casing pipeAIP Advances, 2019
- Characterization of inclusions of X80 pipeline steel and its correlation with hydrogen-induced crackingCorrosion Science, 2011
- Effect of microstructure and inclusions on hydrogen induced cracking susceptibility and hydrogen trapping efficiency of X120 pipeline steelMaterials Science and Engineering: A, 2010
- Effects of inclusion and loading direction on the fatigue behavior of hot rolled low carbon steelInternational Journal of Fatigue, 2010
- Effects of hydrogen-charging on the susceptibility of X100 pipeline steel to hydrogen-induced crackingInternational Journal of Hydrogen Energy, 2009
- Effect of inclusions on initiation of stress corrosion cracks in X70 pipeline steel in an acidic soil environmentCorrosion Science, 2009
- Effect of environmental and metallurgical factors on hydrogen induced cracking of HSLA steelsCorrosion Science, 2008
- Texture development in the cold rolling of IF steelMaterials Science and Engineering: A, 2004
- Analysis of size distributions of primary oxide inclusions in Fe-10 mass Pct Ni-M (M=Si, Ti, Al, Zr, and Ce) alloyMetallurgical and Materials Transactions B, 1999
- The effect of inclusion parameters on the fracture toughness of two X-70 Pipeline steelsJournal of Materials for Energy Systems, 1985