Dynamic Recrystallisation and Crack Propagation in a Sn-3Ag-0.5Cu/Cu Solder Joint
Preprint
- 8 July 2025
- preprint
- Published by MDPI AG in Preprints.org
Abstract
If electronics manufacturers and users are to have confidence in the reliability of the solder joints on which they rely, it is essential to have an understanding of the solder joint failure mechanisms and the role of dynamic recrystallisation in failure. However, due to difficulties in real-time atomistic scale analysis during deformation, we still do not fully understand these mechanisms. Here, we report the development of an innovative in-situ method using high voltage transmission electron microscopy (HV-TEM) for observation of the microstructural response of a solder joint to room temperature tensile loading. This technique was used to observe events including dislocation formation, dynamic recrystallisation, grain boundary separation, and crack formation and propagation in a Sn-3wt.%Ag-0.5wt.%Cu (SAC305) alloy joint formed between copper substrates.Keywords
All Related Versions
- Version 1, 2025-07-08, Preprints
- Published version: Materials, 18 (16), 3925.
This publication has 22 references indexed in Scilit:
- In-situ TEM investigation of dislocation healing and recrystallization in nanoscratched silicon at elevated temperatures up to 800 °CJournal of Materials Research and Technology, 2024
- From early microstructural evolution to intergranular crack propagation in SAC solders under thermomechanical fatigueMicroelectronics Reliability, 2021
- In-situ TEM study of radiation-induced amorphization and recrystallization of hydroxyapatiteJournal of Nuclear Materials, 2018
- A review of dynamic recrystallization phenomena in metallic materialsMaterials & Design, 2016
- Impact of laminate cracks under solder pads on the fatigue lives of ball grid array solder jointsMicroelectronics Reliability, 2015
- Recrystallization as a Growth Mechanism for Whiskers on Plastically Deformed Sn FilmsJournal of Electronic Materials, 2015
- Characterization of Recrystallization and Microstructure Evolution in Lead-Free Solder Joints Using EBSD and 3D-XRDJournal of Electronic Materials, 2012
- Recrystallization and Precipitate Coarsening in Pb-Free Solder Joints During Thermomechanical FatigueJournal of Electronic Materials, 2011
- The influence of solder composition on the impact strength of lead-free solder ball grid array jointsMicroelectronics Reliability, 2011
- Failure mode analysis of lead-free solder joints under high speed impact testingMaterials Science and Engineering: A, 2008