Report on Over 25 000 Cycles Fatigue Test Results of a REBCO HTS Coil and Crossover Joint in a 7 T Background Magnetic Field at 4.2 K
- 4 February 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-4
Abstract
This study presents experimental results on the fatigue characteristics of a REBCO coil and crossover joint, aiming to determine whether they can withstand cyclic loading up to the condition of the 40 T superconducting magnet's design fatigue limit. A pair of REBCO coils were wound with SP (SuperPower) 1013, using copper and stainless steel tape as co-winding materials. The crossover sample, designed to the 40 T superconducting magnet baseline specifications and composed of four Bi2223 (Sumitomo Type H) tape conductors soldered to a stainless steel foil, was mounted to the outermost turn of the REBCO coil. Both the coil and crossover were subjected to cyclic loading by ramping the current up and down in a 7 T background magnetic (BM) field at 4.2 K, with over 25,000 cycles applied. The electromagnetic strain between the outermost turn of the REBCO coil and the crossover joint was estimated numerically, considering the screening current distribution.Keywords
Funding Information
- National Science Foundation (DMR-2131790, DMR-21285563)
- National High Magnetic Field Laboratory
- State of Florida
This publication has 9 references indexed in Scilit:
- Elastic-plastic conductor damage evaluation at over 0.4% strain using a high-stress REBCO coilSuperconductor Science and Technology, 2024
- Design, Fabrication, and Assembly of the SPARC Toroidal Field Model CoilIEEE Transactions on Applied Superconductivity, 2024
- Screening Current Induced Field Changes During De-Energization With Axial ClampingIEEE Transactions on Applied Superconductivity, 2022
- Computing Strains Due to Screening Currents in REBCO MagnetsIEEE Transactions on Applied Superconductivity, 2020
- 45.5-tesla direct-current magnetic field generated with a high-temperature superconducting magnetNature, 2019
- Generation of 25 T with an all-superconducting magnet system: field profile and field quality measurements of a layer-wound 4 T REBCO insert coil for a 21 T LTS magnetSuperconductor Science and Technology, 2019
- Construction and Test of a 7 T Metal-as-Insulation HTS Insert Under a 20 T High Background Magnetic Field at 4.2 KIEEE Transactions on Applied Superconductivity, 2019
- Recent Development of the 25 T All-Superconducting Magnet at IEEIEEE Transactions on Applied Superconductivity, 2018
- Electro-mechanical properties of REBCO coated conductors from various industrial manufacturers at 77 K, self-field and 4.2 K, 19 TSuperconductor Science and Technology, 2015