Performance Validation of Control Algorithm Considering Independent Generator Torque Control in PCS
Open Access
- 12 December 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (24) , 11598
Abstract
This study designed and validated a power control algorithm tailored to the unique characteristics of a 100 kW wind turbine equipped with an independent generator torque control system within the Power Conversion System (PCS). Unlike conventional power control methods based on the Programmable Logic Controller (PLC), the independent generator torque control in the PCS estimates the generator speed based on the voltage signal and performs the generator torque control without any interference from the PLC. The conventional power control algorithm in the PLC was modified so that the PLC could perform the power control by the blade pitch control only. Furthermore, a mode transition algorithm was designed to improve the shortcomings of the mode switch previously used for transitioning between the torque and pitch control modes. To verify the performance, a simulation environment similar to actual control conditions was established using a commercial analysis program, and dynamic simulations were conducted. Additionally, for the experimental validation, the proposed control algorithm was applied to a scaled wind turbine, and wind tunnel tests were performed. The results of the simulations and wind tunnel tests confirmed the operational performance of the PCS’s torque control and the improved control transition logic. The proposed control algorithm could be specifically applied to medium-sized wind turbines employing a sensorless generator speed estimation method and independent generator torque control in the PCS.Keywords
Funding Information
- International Energy Joint R&D Program of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) (20218520020010)
- Ministry of Trade, Industry and Energy (20218520020010)
This publication has 24 references indexed in Scilit:
- Effect of various design configurations and operating conditions for optimization of a wind/solar/hydrogen/fuel cell hybrid microgrid system by a bio-inspired algorithmInternational Journal of Hydrogen Energy, 2024
- Optimizing wind turbine integration in microgrids through enhanced multi-control of energy storage and micro-resources for enhanced stabilityJournal of Cleaner Production, 2024
- Energy-economic assessment of self-sufficient microgrid based on wind turbine, photovoltaic field, wood gasifier, battery, and hydrogen energy storageInternational Journal of Hydrogen Energy, 2023
- Peak shaving strategy for load reduction of wind turbines based on model predictive controlEnergy Reports, 2022
- MPC framework for constrained wind turbine individual pitch controlWind Energy, 2020
- Application and Validation of Peak Shaving to Improve Performance of a 100 kW Wind TurbineInternational Journal of Precision Engineering and Manufacturing-Green Technology, 2019
- Field Validation of Demanded Power Point Tracking Control Algorithm for Medium-Capacity Wind TurbineInternational Journal of Precision Engineering and Manufacturing-Green Technology, 2019
- Feedforward Control for Wind Turbine Load Reduction with Pseudo-LIDAR MeasurementInternational Journal of Automation and Computing, 2018
- Wind Turbine Control for Load ReductionWind Energy, 2003
- Individual Blade Pitch Control for Load ReductionWind Energy, 2002