Investigating the influence of periwinkle shell powder on the thermal and mechanical performance of high-density polyethylene composites
Open Access
- 1 October 2024
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (10) , 105308
Abstract
In this study, the shell powder of Littorina littorea commonly called periwinkle was used as an eco-friendly filler in High-Density Polyethylene (HDPE) to form periwinkle/HDPE composites (PHPC). Understanding the effect of different particle sizes of periwinkle shell powder (PSP) and optimizing their influence on PHPC is the main scope of this work. Periwinkle shell (PS) particles with sizes ranging from L53, PHPC53, PHPC75, PHPC90, PHPC105, and PHPC150, respectively. The composites were fabricated by incorporating 1 wt% PSP into the HDPE matrix using the compression molding technique and then subjected to morphological, thermal, and mechanical characterizations. Morphology studies using scanning electron microscopy (SEM) confirms 150 μm PSP had the best dispersion whereas 75 μm PSP resulted in agglomeration. PSP had little influence on the thermal stability of HDPE except for PHPC150 which showed an increase in the degradation temperature when compared to the virgin sample. Mechanical properties such as hardness, Young’s modulus, impact strength, and flexural modulus were enhanced by the addition of PSP. However, a decrease was noted in the elongation at break (%) and flexural strength of PHPC indicating the stiffening effect of the filler on the HDPE. In order to understand the particle size influence better, the extension evaluation method (EEM) was used for all samples and PHPC150 was found to be the best performing among all particle sizes.Keywords
This publication has 36 references indexed in Scilit:
- Experimental investigation on the influence of novel catalyst in co-pyrolysis of polymeric waste: Characterization of oil and preparation of char reinforced compositesJournal of Cleaner Production, 2021
- Assessment of mechanical properties of HDPE composite with addition of marble and granite dustAin Shams Engineering Journal, 2020
- Effect of micro‐sized marble dust on mechanical and thermo‐mechanical properties of needle‐punched nonwoven jute fiber reinforced polymer compositesPolymer Composites, 2020
- Regulation on dual-interface of core–shell dispersed phases and mechanical properties of PP blends by rotary evaporation-assisted melt grafted EPDM-g-MAHComposites Part C: Open Access, 2020
- Mechanical behavior of additively manufactured nanoclay/HDPE nanocompositesComposite Structures, 2020
- Mechanical properties of hybrid polymer composites: a reviewJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2020
- Potential of natural fiber/biomass filler-reinforced polymer composites in aerospace applications2018
- The influence of particle size and surface treatment of filler on the properties of oyster shell powder filled polypropylene compositesPolymer Composites, 2016
- Development of HDPE‐modified eggshell compositePolymer Composites, 2016
- Calcium carbonate (CaCO3) nanoparticle filled polypropylene: Effect of particle surface treatment on mechanical, thermal, and morphological performance of compositesJournal of Applied Polymer Science, 2011