Romain Hersent
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Romain Hersent has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Virginie Nodjiadjim
III-V Lab, Palaiseau, France
6 shared publications - Agnieszka Konczykowska
III-V Lab, a joint Laboratory of Nokia Bell Laboratories, Thales, and CEA LETI, Palaiseau, France
5 shared publications - Filipe Jorge
III-V Lab, a joint Laboratory of Nokia Bell Laboratories, Thales, and CEA LETI, Palaiseau, France
5 shared publications C. Mismer
III-V Lab, Joint Lab of Nokia Bell Labs, Thales R. and T. and CEA Leti, Palaiseau, France
4 shared publicationsM. Riet
III-V Lab, Joint Lab of Nokia Bell Labs, Thales R. and T. and CEA Leti, Palaiseau, France
4 shared publications- Jeremie Renaudier
Nokia Bell Labs, Massy, France
3 shared publications
Latest Publications
- 4 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Conception et caractérisation de circuits intégrés en transistors bipolaires àdouble hétérojonction sur phosphure d’indium pour les télécommunicationsoptiques de classe Tb/s/canal
Ces travaux présentent l’étude, la conception et la caractérisation de circuits électroniques intégrés analogiques, réalisés dans la technologie TBDH sur InP de 0,7 mm de largeur d’émetteur du III-V Lab, pour les télécommunications optiques de classe Tb/s/canal. Nous montrons comment l’intégration monolithique d’un entrelaceur analogique deux voies vers une, d’un driver linéaire de modulateur et d’un égaliseur linéaire à temps continu, en synergie avec cette technologie de transistors à fort produit vitesse de fonctionnement x amplitude de sortie, permet d’atteindre des excursions linéaires en tension de sortie différentielles de 3 Vcc à 160 Gb/s en format de modulation multi-niveaux, avec une très bonne qualité du signal, avançant l’état de l’art. Les circuits proposés visent à lever le verrou lié à la bande passante des transmetteurs optiques cohérents afin de repousser leurs limitations en débit symbole électrique, à travers une approche multi-technologiques InP/Si pour exploiter les meilleures performances de chacune.
- 4 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Conception et caractérisation de circuits intégrés en transistors bipolaires àdouble hétérojonction sur phosphure d’indium pour les télécommunicationsoptiques de classe Tb/s/canal
Ces travaux présentent l’étude, la conception et la caractérisation de circuits électroniques intégrés analogiques, réalisés dans la technologie TBDH sur InP de 0,7 mm de largeur d’émetteur du III-V Lab, pour les télécommunications optiques de classe Tb/s/canal. Nous montrons comment l’intégration monolithique d’un entrelaceur analogique deux voies vers une, d’un driver linéaire de modulateur et d’un égaliseur linéaire à temps continu, en synergie avec cette technologie de transistors à fort produit vitesse de fonctionnement x amplitude de sortie, permet d’atteindre des excursions linéaires en tension de sortie différentielles de 3 Vcc à 160 Gb/s en format de modulation multi-niveaux, avec une très bonne qualité du signal, avançant l’état de l’art. Les circuits proposés visent à lever le verrou lié à la bande passante des transmetteurs optiques cohérents afin de repousser leurs limitations en débit symbole électrique, à travers une approche multi-technologiques InP/Si pour exploiter les meilleures performances de chacune.
- Open Access
- 30 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (10) , 7403-7421
InP DHBT 200-GSa/s Large Output Swing AMUX-Driver Using Transimpedance Stage Loading for 200-Gbaud-and-Beyond Optical Transceivers
In this article, we report on the design and characterization of InP-DHBT analog multiplexer (AMUX)-driver integrated circuits (ICs) for next generation $\geq 200$ Gbaud (GBd) metro/long-haul optical transceivers. We show that the transimpedance stage (TIS) loading of the AMUX selecting cell provides superior gain $\times $ bandwidth and linearity performances with respect to the commonly used resistive and cascode loads. Moreover, the driving clock amplitude and tail current of the selecting core are shown to be key parameters for the AMUX-driver design. The AMUX-drivers with TIS loading are fabricated in the III-V Lab’s InP DHBT process, showing up to 200-GSa/s sampling rate, without any support of DSP. At 100 GSa/s and 2.4 Vppd of PAM-4 output swing, the highest AMUX FoM is obtained. To the best of the authors’ knowledge, these are the highest performances reported to date for an AMUX(-driver). Additionally, an AMUX-driver chip is assembled with a TFLN modulator, demonstrating an E/O bandwidth in excess of 85 GHz, while supporting the generation of 100-GBd PAM-4 optical signals, without DSP or active cooling.
- 30 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (10) , 7403-7421
Open AccessInP DHBT 200-GSa/s Large Output Swing AMUX-Driver Using Transimpedance Stage Loading for 200-Gbaud-and-Beyond Optical Transceivers
In this article, we report on the design and characterization of InP-DHBT analog multiplexer (AMUX)-driver integrated circuits (ICs) for next generation $\geq 200$ Gbaud (GBd) metro/long-haul optical transceivers. We show that the transimpedance stage (TIS) loading of the AMUX selecting cell provides superior gain $\times $ bandwidth and linearity performances with respect to the commonly used resistive and cascode loads. Moreover, the driving clock amplitude and tail current of the selecting core are shown to be key parameters for the AMUX-driver design. The AMUX-drivers with TIS loading are fabricated in the III-V Lab’s InP DHBT process, showing up to 200-GSa/s sampling rate, without any support of DSP. At 100 GSa/s and 2.4 Vppd of PAM-4 output swing, the highest AMUX FoM is obtained. To the best of the authors’ knowledge, these are the highest performances reported to date for an AMUX(-driver). Additionally, an AMUX-driver chip is assembled with a TFLN modulator, demonstrating an E/O bandwidth in excess of 85 GHz, while supporting the generation of 100-GBd PAM-4 optical signals, without DSP or active cooling.
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 37 (3) , 229-237
Research Toward Wafer-Scale 3D Integration of InP Membrane Photonics With InP Electronics
In this study, we focus on the development of key processes towards wafer-scale 3-dimentional/vertical (3D) integration of Indium-Phosphide (InP) photonic membranes on InP electronics via adhesive bonding. First, we identified the most critical steps and optimized them to achieve high thermal and mechanical compatibility of components for the co-integration process. Next, we developed a strategy for InP-to-InP wafer bonding with high topology tolerance, and introduced hard benzocyclobutene (BCB) anchors to preserve the alignment and BCB thickness uniformity after bonding. The resulting bond layer is homogeneous in terms of physical and mechanical properties. Finally, we developed a novel method to selectively remove the InP substrate from the photonics side via wet etching while protecting the electronics carrier wafer with hermetic multi-layer coatings. The investigation of these key steps is essential for scalable 3D integration of photonics and electronics at ultra short distances (<15 μm).
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 37 (3) , 229-237
Research Toward Wafer-Scale 3D Integration of InP Membrane Photonics With InP Electronics
In this study, we focus on the development of key processes towards wafer-scale 3-dimentional/vertical (3D) integration of Indium-Phosphide (InP) photonic membranes on InP electronics via adhesive bonding. First, we identified the most critical steps and optimized them to achieve high thermal and mechanical compatibility of components for the co-integration process. Next, we developed a strategy for InP-to-InP wafer bonding with high topology tolerance, and introduced hard benzocyclobutene (BCB) anchors to preserve the alignment and BCB thickness uniformity after bonding. The resulting bond layer is homogeneous in terms of physical and mechanical properties. Finally, we developed a novel method to selectively remove the InP substrate from the photonics side via wet etching while protecting the electronics carrier wafer with hermetic multi-layer coatings. The investigation of these key steps is essential for scalable 3D integration of photonics and electronics at ultra short distances (<15 μm).
- Open Access
- 12 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (3) , 1618-1633
InP DHBT Linear Modulator Driver With a 3-Vppd PAM-4 Output Swing at 90 GBaud: From Enhanced Transistor Modeling to Integrated Circuit Design
In this article, we report on the modeling, design, and characterization of indium phosphide (InP) double heterojunction bipolar transistor (DHBT) devices and integrated circuits (ICs) for next-generation optical communications. Critical aspects of transistors’ modeling and their influence on the IC design are detailed, as well as the design and characterization of a lumped linear modulator driver featuring a 3-Vppd four-level pulse-amplitude modulation (PAM-4) output swing at 90 GBaud (GBd). In particular, we propose an electromagnetic (EM) simulation-based parasitic extraction method of the DHBT access structures, to refine the DHBT and IC performance prediction accuracy. It is shown to provide a better estimation of a canonical cascode gain and $\mu$ stability factor at millimeter-wave frequencies, as well as a better estimation of the driver IC gain in the 50–110 GHz frequency range. Furthermore, a high-frequency gain boosting (self-peaking) topology, based upon an emitter-degenerated paralleled-transistor cascode configuration, is analyzed using a simplified transistor model and leveraged to enhance the linear driver output-stage gain–bandwidth product with controlled amount of peaking gain. This self-peaking technique is shown to be inherent to cascode structures and can therefore be used with other technologies, with no added design complexity. The driver IC was implemented in a 0.5- $\mu$ m InP-DHBT technology and features a bandwidth well in excess of 110 GHz, with 13 dB of peaking gain at 95 GHz. Besides, it achieves a 9.1-dBm single-ended output power at 1 dB of gain compression and a 2.7% root-mean-square total harmonic distortion (rms-THD) at a 3-Vppd output swing. The driver power consumption is 0.67 W, which is among the lowest in the state of the art and shows a 1.5-GBd driver figure of merit (FoM). To the best of our knowledge, this driver achieves the highest $\geq$ 64 GBd PAM-4 performances reported to date, without digital signal processing (DSP) or postprocessing.
- 12 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (3) , 1618-1633
Open AccessInP DHBT Linear Modulator Driver With a 3-Vppd PAM-4 Output Swing at 90 GBaud: From Enhanced Transistor Modeling to Integrated Circuit Design
In this article, we report on the modeling, design, and characterization of indium phosphide (InP) double heterojunction bipolar transistor (DHBT) devices and integrated circuits (ICs) for next-generation optical communications. Critical aspects of transistors’ modeling and their influence on the IC design are detailed, as well as the design and characterization of a lumped linear modulator driver featuring a 3-Vppd four-level pulse-amplitude modulation (PAM-4) output swing at 90 GBaud (GBd). In particular, we propose an electromagnetic (EM) simulation-based parasitic extraction method of the DHBT access structures, to refine the DHBT and IC performance prediction accuracy. It is shown to provide a better estimation of a canonical cascode gain and $\mu$ stability factor at millimeter-wave frequencies, as well as a better estimation of the driver IC gain in the 50–110 GHz frequency range. Furthermore, a high-frequency gain boosting (self-peaking) topology, based upon an emitter-degenerated paralleled-transistor cascode configuration, is analyzed using a simplified transistor model and leveraged to enhance the linear driver output-stage gain–bandwidth product with controlled amount of peaking gain. This self-peaking technique is shown to be inherent to cascode structures and can therefore be used with other technologies, with no added design complexity. The driver IC was implemented in a 0.5- $\mu$ m InP-DHBT technology and features a bandwidth well in excess of 110 GHz, with 13 dB of peaking gain at 95 GHz. Besides, it achieves a 9.1-dBm single-ended output power at 1 dB of gain compression and a 2.7% root-mean-square total harmonic distortion (rms-THD) at a 3-Vppd output swing. The driver power consumption is 0.67 W, which is among the lowest in the state of the art and shows a 1.5-GBd driver figure of merit (FoM). To the best of our knowledge, this driver achieves the highest $\geq$ 64 GBd PAM-4 performances reported to date, without digital signal processing (DSP) or postprocessing.
- 16 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 112-119
InP/GaAsSb DHBTs: THz Analog Performance and Record 180-Gb/s 5.5Vppd-Swing PAM-4 DAC-Driver
"Type-II" InP/GaAsSb DHBTs are the first non-GaInAs -based transistors to show oscillation frequencies > 1 THz with the associated benefits of higher breakdown voltages, low power dissipation, and superior linearity and scaling characteristics. Whereas no large-signal characterization of THz transistors is found in the literature, THz InP/GaAsSb DHBTs display attractive 94 GHz load-pull characteristics, and less aggressively scaled devices achieve record saturated output power and output power density per unit emitter area. The physical advantages of Type-II InP/GaAsSb are reviewed here. Beyond impressive analog small/large-signal performance metrics, we report a record mixed-signal performance for a PAM-4 DAC-driver designed and fabricated at III-V Lab in a 0.7-μm InP/GaAsSb DHBT technology implemented on epitaxial layers grown at ETHZ. The DAC-driver offers an unprecedented 5.5-Vppd 90-GBd (180 Gb/s) differential output swing with high eye diagram quality and over 12-dB gain control capability at a 1.1-W power consumption, leading to a record 3.1-GBd E/O modulator driver figure-of-merit (FoM). PAM-4 operation at 112-Gb (224 Gb/s) is also demonstrated with 3.35-Vppd and 0.6-W dissipation, also with a record 2.6-GBb E/O FoM. A 110 GHz bandwidth linear driver with a 16.7 dB gain and 0.85-W consumption was also implemented in the same technology, enabling a 4.1-Vppd output swing at 100 Gb/s both in PAM-4 and NRZ signaling. The all-around outstanding performance of InP/GaAsSb DHBTs makes them attractive for a wide variety of analog and mixed-signal circuit blocks used in modern telecommunication applications.
- 16 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 112-119
InP/GaAsSb DHBTs: THz Analog Performance and Record 180-Gb/s 5.5Vppd-Swing PAM-4 DAC-Driver
"Type-II" InP/GaAsSb DHBTs are the first non-GaInAs -based transistors to show oscillation frequencies > 1 THz with the associated benefits of higher breakdown voltages, low power dissipation, and superior linearity and scaling characteristics. Whereas no large-signal characterization of THz transistors is found in the literature, THz InP/GaAsSb DHBTs display attractive 94 GHz load-pull characteristics, and less aggressively scaled devices achieve record saturated output power and output power density per unit emitter area. The physical advantages of Type-II InP/GaAsSb are reviewed here. Beyond impressive analog small/large-signal performance metrics, we report a record mixed-signal performance for a PAM-4 DAC-driver designed and fabricated at III-V Lab in a 0.7-μm InP/GaAsSb DHBT technology implemented on epitaxial layers grown at ETHZ. The DAC-driver offers an unprecedented 5.5-Vppd 90-GBd (180 Gb/s) differential output swing with high eye diagram quality and over 12-dB gain control capability at a 1.1-W power consumption, leading to a record 3.1-GBd E/O modulator driver figure-of-merit (FoM). PAM-4 operation at 112-Gb (224 Gb/s) is also demonstrated with 3.35-Vppd and 0.6-W dissipation, also with a record 2.6-GBb E/O FoM. A 110 GHz bandwidth linear driver with a 16.7 dB gain and 0.85-W consumption was also implemented in the same technology, enabling a 4.1-Vppd output swing at 100 Gb/s both in PAM-4 and NRZ signaling. The all-around outstanding performance of InP/GaAsSb DHBTs makes them attractive for a wide variety of analog and mixed-signal circuit blocks used in modern telecommunication applications.
- Open Access
- 8 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 32 (6) , 752-755
160-GSa/s-and-Beyond 108-GHz-Bandwidth Over-2-Vppd Output-Swing 0.5-μm InP DHBT 2:1 AMUX-Driver for Next-Generation Optical Communications
This letter reports on a 108-GHz bandwidth 0.5- $\mu \text{m}$ InP DHBT analog-multiplexer-driver (AMUX-driver). To the best of the authors’ knowledge, this 2:1 AMUX-driver shows unprecedented 1.9-V ppd 160-GSa/s 160-GBd non-return-to-zero (NRZ) and 2.4-V ppd 100-GSa/s 100-GBd PAM-4 output swings, with very high-quality eye diagrams, without any digital signal processing (DSP) or postprocessing. Up to 3.2 V ppd is obtained in NRZ at 100 GBd. The lumped AMUX-driver also shows record 25.7-dB gain and 2.08-THz gain-bandwidth product with 11.1-dB equalizing capabilities at 86.6 GHz.
- 8 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 32 (6) , 752-755
Open Access160-GSa/s-and-Beyond 108-GHz-Bandwidth Over-2-Vppd Output-Swing 0.5-μm InP DHBT 2:1 AMUX-Driver for Next-Generation Optical Communications
This letter reports on a 108-GHz bandwidth 0.5- $\mu \text{m}$ InP DHBT analog-multiplexer-driver (AMUX-driver). To the best of the authors’ knowledge, this 2:1 AMUX-driver shows unprecedented 1.9-V ppd 160-GSa/s 160-GBd non-return-to-zero (NRZ) and 2.4-V ppd 100-GSa/s 100-GBd PAM-4 output swings, with very high-quality eye diagrams, without any digital signal processing (DSP) or postprocessing. Up to 3.2 V ppd is obtained in NRZ at 100 GBd. The lumped AMUX-driver also shows record 25.7-dB gain and 2.08-THz gain-bandwidth product with 11.1-dB equalizing capabilities at 86.6 GHz.
- Open Access
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 7 (1) , 748-752
0.7-$\mu$ m InP DHBT Technology With 400-GHz ${f}_{{T}}$ and ${f}_{\text{MAX}}$ and 4.5-V BVCE0 for High Speed and High Frequency Integrated Circuits- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 7 (1) , 748-752
Open Access0.7-$\mu$ m InP DHBT Technology With 400-GHz ${f}_{{T}}$ and ${f}_{\text{MAX}}$ and 4.5-V BVCE0 for High Speed and High Frequency Integrated Circuits