Multifunctional evaluation of treated cork powder-doped hybrid fiber metal laminates (HFMLs): Mechanical properties, electromagnetic shielding, and X-ray attenuation
- 5 May 2026
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Abstract
In this study, hybrid fiber–metal laminates (HFMLs), composed of aluminum, glass fibers, and epoxy resin, were fabricated by incorporating cork powder chemically treated with a 2 wt.% NaOH solution (particle size <200 µm). Three types of laminates were produced with cork contents of 0%, 3%, and 6%, denoted as FML-0, FML-3, and FML-6. Mechanical properties were evaluated through three-point bending and Charpy impact tests. Although the flexural strength and stiffness decreased with the addition of cork, in the Charpy test, the FML-3 laminate showed an improvement in specific absorbed energy of +22.76% on aluminum side and +26.42% on composite layer side. This improvement is attributed to better energy dissipation due to homogeneous dispersion of particles within the epoxy. Electromagnetic shielding effectiveness, related to microwave absorption, was evaluated in the X-band (8–12 GHz) using a vector network analyzer. The FML-3 laminate achieved a reflection loss of −29.18 dB, corresponding to 99.88% attenuation of the incident electromagnetic wave for a thickness of 5.70 mm. X-ray attenuation measurements, performed with tube voltages ranging from 20 to 30 kV, showed an increase in the mass attenuation coefficient with increasing cork content, accompanied by a reduction in density, particularly noticeable for FML-6.Keywords
This publication has 80 references indexed in Scilit:
- Sustainable optimization of compression molding parameters for high‐performance titanium‐based fiber metal laminates with graphene‐enhanced Kevlar/jute fibersPolymer Composites, 2025
- 3D‐Printed Pyramidal Honeycomb Structures Plated with Silver and Infused with Fe3O4–Epoxy Composite for Microwave Absorption ApplicationsAdvanced Engineering Materials, 2024
- Multi‐Scale Dispersion Engineering on Biomass‐Derived Materials for Ultra‐Wideband and Wide‐Angle Microwave AbsorptionSmall Methods, 2024
- Structural effects of AgNWs/MXene in artificial nacre‐Like hybrid cellulose nanofiber films on electromagnetic interference (EMI) shielding performancePolymer Composites, 2024
- Enhanced interlaminar mechanical behavior of advanced fiber metal laminates via nano Al2O3‐IPN formation and surface pre‐treatmentsPolymer Composites, 2023
- Characterisation of Micro-Sized and Nano-Sized Tungsten Oxide-Epoxy Composites for Radiation Shielding of Diagnostic X-Rays2020
- Investigation of microstructure, electrical behavior, and EMI shielding effectiveness of silicone rubber/carbon black/nanographite hybrid compositesPolymer Composites, 2019
- Strain rate effect on composites with epoxy matrix filled by cork powderMaterial Design & Processing Communications, 2019
- Self‐Assembly Core–Shell Graphene‐Bridged Hollow MXenes Spheres 3D Foam with Ultrahigh Specific EM Absorption PerformanceAdvanced Functional Materials, 2018
- Tensile and impact properties of cost‐effective hybrid fiber metal laminate sandwich structuresAdvances in Polymer Technology, 2017