Homologous Bisphenol-A Modification Enables SiO2/Epoxy Composites with Ultralow Thermal Expansion, High T g, and Superior Thermal Shock Resistance for Power Device Packaging
- 3 August 2026
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (15) , 12853-12868
Abstract
Next-generation power device packaging demands epoxy (EP) composites that achieve a critical combination of low thermal expansion, high-temperature resistance, and thermal shock stability. High-performance EP composites were developed using a synergistic materials design strategy combining filler surface modification, filler gradation, and resin blending. Silica (SiO2) was surface-modified with 2,2-bis(4-hydroxyphenyl) propane (Br5215), a bisphenol-A-based molecule structurally compatible with the epoxy matrix, forming a robust interfacial layer via covalent bonding and π–π interactions. This effectively suppresses filler agglomeration and enhances interfacial adhesion. In parallel, blending difunctional and trifunctional epoxy resins enabled simultaneous control of viscosity and cross-link density. Experimental results show that the glass transition temperature (Tg) of the B-SiO2/EP composite reaches 205.6 °C. The coefficient of thermal expansion below Tg, denoted as α1, is 25.81 × 10–6/°C, representing a reduction of 70.1% compared to neat EP. After 1000 thermal shock cycles (−60 to 150 °C), the composite still maintains a Tg of 202.4 °C (only a 1.6% decrease) and an α1 of 26.6 × 10–6/°C (only a 3.2% increase), with no interfacial delamination from the copper substrate. This represents a significant improvement over neat EP (delamination after 200 cycles) and SiO2/EP (delamination after 800 cycles). This study provides a practical strategy for developing high-reliability epoxy encapsulants for power device packaging.Keywords
Funding Information
- National Key Research and Development Program of China (2024YFE0204900)
This publication has 83 references indexed in Scilit:
- Highly‐Effective Thermoelectric Cooling for Power Semiconductor Devices Packed with Thermal‐Expansion Offset and Flame Retardancy Epoxy ResinAdvanced Functional Materials, 2025
- Enhancing epoxy/silica composite properties with a novel biomass‐based silane coupling agents synthesized via thiol‐ene reactionPolymer Composites, 2025
- Preparation process for biomass nanofiber/bisphenol A-type epoxy resin composites with superior mechanical and thermal propertiesCellulose, 2025
- Hydroxyl‐Terminated Polyphenylene Oxide Improved Thermal and Dielectric Properties of Active Ester Cured SiO 2 /Epoxy Composites for Advanced Electronic PackagingAdvanced Engineering Materials, 2025
- Investigation on mechanical properties and thermal expansibility of epoxy resin copolymerization modified cyanate ester under medium‐low temperature curing processPolymers for Advanced Technologies, 2023
- Silane coupling agent 3‐aminopropyltriethoxysilane modified silica/epoxidized solution‐polymerized styrene butadiene rubber nanocompositesPolymer Composites, 2023
- Achieving high-temperature resistance and excellent insulation property of epoxy by introducing triazine ring structureJournal of Materials Science: Materials in Electronics, 2023
- Bio-based trifunctional diphenolic acid epoxy resin with high Tg and low expansion coefficient: synthesis and propertiesPolymer Bulletin, 2022
- Enhanced thermal and mechanical properties of epoxy composites filled with hybrid filler system of aluminium nitride and boron nitridePolymer Composites, 2017
- Rice husk‐derived porous carbon/silica particles as green filler for electronic package applicationJournal of Applied Polymer Science, 2016